[ANN][DASH] Dash (dash.org) | First Self-Funding Self-Governing Crypto Currency

[Coolstoryteller]

So the normal minerd won't work because of the x11?

Can this be mined in unix?

Edit: Ah looks like you can build it, giving that a try.

Easy Tutorial

1 - Log into root

2 - Create a swap file

sudo dd if=/dev/zero of=/swapfile bs=64M count=16
sudo mkswap /swapfile
sudo swapon /swapfile

3 - Download minerd, configure and compile

sudo apt-get update
sudo apt-get install build-essential libcurl4-openssl-dev zip
sudo apt-get install automake
sudo wget https://github.com/ig0tik3d/xcoin-cpuminer_1.1/archive/master.zip
sudo unzip 34a84a753c5b86614bd05fb7c34a801885d23f71.zip
cd xcoin-cpuminer_1.1-34a84a753c5b86614bd05fb7c34a801885d23f71
chmod 755 ./autogen.sh
./autogen.sh
sudo CFLAGS="-O3 -msse2" ./configure
sudo make
sudo strip minerd

4 - Signup at a pool

./minerd -a X11 -o stratum+tcp://pool.darkcoin.io:3333 -u username.workername -p password

5 - You should see it detect threads and then you're good to go

[mattmct]

Cheers Coolstoryteller!

I actually did something very similar before I read your reply, but your method might be better. Cheers again!

[CHAOSiTEC]

So the normal minerd won't work because of the x11?

Can this be mined in unix?

Edit: Ah looks like you can build it, giving that a try.

2 - Create a swap file

sudo dd if=/dev/zero of=/swapfile bs=64M count=16
sudo mkswap /swapfile
sudo swapon /swapfile

only needed if your system is low on memory, like 512 or 1 meg.. and you havnt created a swap partition on your computer,
tutorial is good for creating the cpu miner on cloud servers

[TanteStefana]

Wow, I missed a lot!

I liked X11, but understand the problem, though if you add coin to the end, you don't get the Linux stuff...

Darkcoin is good too, glad no annonecoin because there already is one.  They use the invisible internet i2p and tor to hide their transactions.  I'd love it for eduiffield to give us a pros/cons between our Darkcoin vs this system?  Certainly, I like a less restrictive number of coins to make them more usable (anoncoin has very few coins total)

I don't have time to compile a new miner, is it necessary?  Will you keep the old pool address going a while, CHAOSiTEC?

[CHAOSiTEC]

Will you keep the old pool address going a while, CHAOSiTEC?

yeah ill be keeping it up for now, i expect to start moving things over to drk.lotterymining.com tomorrow, but for now you can keep
using your current settings...

the miner doesnt need to be recompiled

only the wallet...

[eddywise]

why the same coins?
see https://bitcointalk.org/index.php?topic=384582.0 PLZ

[eduffield]

why the same coins?
see https://bitcointalk.org/index.php?topic=384582.0 PLZ

I reached out to that guy yesterday thinking the coin was dead, he got back to me this morning and is interested in helping out around here. So I guess the 2 coin communities are merging. Should be interesting.

[ig0tik3d]

new windows wallet v0.8.6.2-g542ecf3-beta
https://drive.google.com/file/d/0B9cvOfoOekSdZk93emdjRnZFN3c/edit?usp=sharing

p.s. new version miner ...about 50%-70% fastest
source code
https://github.com/ig0tik3d/darkcoin-cpuminer-1.2
win64 binary
https://drive.google.com/file/d/0B9cvOfoOekSdTXpndnpvTmR1MWM/edit?usp=sharing
example start

Code:

minerd -a X11 -o stratum+tcp://xco.smalltimeminer.com:3350 -u workername -p workerpass  

[mattmct]

new windows wallet v0.8.6.2-g542ecf3-beta
https://drive.google.com/file/d/0B9cvOfoOekSdZk93emdjRnZFN3c/edit?usp=sharing

p.s. new version miner ...about 50%-70% fastest
source code
https://github.com/ig0tik3d/darkcoin-cpuminer-1.2
win64 binary
https://drive.google.com/file/d/0B9cvOfoOekSdTXpndnpvTmR1MWM/edit?usp=sharing
example start

Code:

minerd -a X11 -o stratum+tcp://xco.smalltimeminer.com:3350 -u workername -p workerpass  

Cheers! The new faster miner sounds good.  But how do we know it's legit? Sorry for my suspicions, but it seems you have to be now days.  Looks like a different gitt.

[CHAOSiTEC]

new windows wallet v0.8.6.2-g542ecf3-beta
https://drive.google.com/file/d/0B9cvOfoOekSdZk93emdjRnZFN3c/edit?usp=sharing

p.s. new version miner ...about 50%-70% fastest
source code
https://github.com/ig0tik3d/darkcoin-cpuminer-1.2
win64 binary
https://drive.google.com/file/d/0B9cvOfoOekSdTXpndnpvTmR1MWM/edit?usp=sharing
example start

Code:

minerd -a X11 -o stratum+tcp://xco.smalltimeminer.com:3350 -u workername -p workerpass  

Cheers! The new faster miner sounds good.  But how do we know it's legit? Sorry for my suspicions, but it seems you have to be now days.  Looks like a different gitt.

but same user that posted the other miners, i vouch for him!

ig0tik3d: NICE 5 khashs/s faster than the previous per core on my laptop.

[ig0tik3d]

if you compile in linux try CFLAGS="-O3 -msse2 -msse4" ..
on my 5800k was about 31kh now about 46kh per thread... (with 3 threads)

[CHAOSiTEC]

if you compile in linux try CFLAGS="-O3 -msse2 -msse4" ..
on my 5800k was about 31kh now about 46kh per thread... (with 3 threads)

gave me about 3k extra im now at 33 khashes/s per core and thats a speed boost of 13 kh/s per core  since version 1 :-)

mine is 3610qm i7

[billotronic]

Previous miner compiled fine. Now getting this:

Code:

gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -fno-strict-aliasing -I./compat/jansson    -O3 -msse2 -msse4 -MT minerd-xcoin.o -MD -MP -MF .deps/minerd-xcoin.Tpo -c -o minerd-xcoin.o `test -f 'xcoin.c' || echo './'`xcoin.c
xcoin.c: In function âXhashâ:
xcoin.c:95:13: warning: assignment discards âconstâ qualifier from pointer target type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
In file included from xcoin.c:29:0:
x6/grso-asm.c: In function âgrsoP1024ASMâ:
x6/grso-asm.c:6:3: error: unknown register name â%r15â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r14â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r13â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r12â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r11â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r10â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r9â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r8â in âasmâ
In file included from xcoin.c:29:0:
x6/grso-asm.c: In function âgrsoQ1024ASMâ:
x6/grso-asm.c:521:3: error: unknown register name â%r15â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r14â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r13â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r12â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r11â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r10â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r9â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r8â in âasmâ

[CHAOSiTEC]

Previous miner compiled fine. Now getting this:

Code:

gcc -std=gnu99 -DHAVE_CONFIG_H -I. -pthread -fno-strict-aliasing -I./compat/jansson    -O3 -msse2 -msse4 -MT minerd-xcoin.o -MD -MP -MF .deps/minerd-xcoin.Tpo -c -o minerd-xcoin.o `test -f 'xcoin.c' || echo './'`xcoin.c
xcoin.c: In function âXhashâ:
xcoin.c:95:13: warning: assignment discards âconstâ qualifier from pointer target type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
In file included from xcoin.c:29:0:
x6/grso-asm.c: In function âgrsoP1024ASMâ:
x6/grso-asm.c:6:3: error: unknown register name â%r15â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r14â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r13â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r12â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r11â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r10â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r9â in âasmâ
x6/grso-asm.c:6:3: error: unknown register name â%r8â in âasmâ
In file included from xcoin.c:29:0:
x6/grso-asm.c: In function âgrsoQ1024ASMâ:
x6/grso-asm.c:521:3: error: unknown register name â%r15â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r14â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r13â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r12â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r11â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r10â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r9â in âasmâ
x6/grso-asm.c:521:3: error: unknown register name â%r8â in âasmâ

what is your gcc version? gcc --version

[mattmct]

Ah cool, many thanks!

I'm getting similar errors.

xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
mv -f .deps/minerd-xcoin.Tpo .deps/minerd-xcoin.Po
gcc -std=gnu99  -O3 -msse2 -msse4 -pthread  -o minerd minerd-cpu-miner.o minerd-    

When I did the config, it complained about files in sub folders or something.

when trying to run it says "Illegal instruction (core dumped)"

---

gcc (Ubuntu/Linaro 4.8.2-14ubuntu4) 4.8.2

[eduffield]

https://bitcointalk.org/index.php?topic=384582.msg4822845#msg4822845

We're officially merged, welcome old DarkCoin community

[CHAOSiTEC]

Ah cool, many thanks!

I'm getting similar errors.

xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
xcoin.c:110:2: warning: right shift count >= width of type [enabled by default]
mv -f .deps/minerd-xcoin.Tpo .deps/minerd-xcoin.Po
gcc -std=gnu99  -O3 -msse2 -msse4 -pthread  -o minerd minerd-cpu-miner.o minerd-    

When I did the config, it complained about files in sub folders or something.

when trying to run it says "Illegal instruction (core dumped)"

---

gcc (Ubuntu/Linaro 4.8.2-14ubuntu4) 4.8.2

must be something to do with your setup, im running 4.8.1 så either its incompatable with the default compiler tools on your computer, your missing something, or its a bug in the compiler itself...

hmmm try my compiled version

https://mega.co.nz/#!PhISTR4J!IMx9kF4EYnJujMioUoDiO1Z0amb8ONdC5yyu5Qhm3Ms

[ig0tik3d]

seems you use 32 bit version linux os...
or try

Code:

sudo apt-get install autotools-dev  libcurl-dev automake
chmod +x autogen.sh
./autogen.sh
./configure CFLAGS="-O3 -msse2 -msse4" 
make
#or 
make -j8

[mattmct]

Cheers for the help!

I downloaded an pasted your build.

./minerd: error while loading shared libraries: libcurl-nss.so.4: cannot open shared object file: No such file or directory

[CHAOSiTEC]

Cheers for the help!

I downloaded an pasted your build.

./minerd: error while loading shared libraries: libcurl-nss.so.4: cannot open shared object file: No such file or directory

sudo apt-get install libcurl4-nss-dev