lolMiner 1.64: Fastest Kaspa miner in market

[FP91G]

lolMiner 1.61
Changes
Slightly improved performance of Flux mining on Nvidia Ampere and Turing cards (by approx 1.5-2.5% compared to 1.60)
Improved system memory footprint when mining Flux or Beam on Nvidia GPUs. This allows running the solvers on more then 8 GPUs with only 4G system memory.
Speed exposed by API is now smoothed, so especially on all Equihash based algorithms the hashrate figures derived from API values will appear more smooth

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.61

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

[ScalperBTC]

KASPA is a heavyhash algorithm, but is it possible to mine another coin using the same (heavyhash) algorithm? If yes, then how?

[vectisitch]

I'm mining with some RX580's. I have my last rig with just 1 card which is not overclocked and doesn't overheat. The hash rate keeps dropping to zero and lolminer stays working but with no hash. Is there a way to restart lolminer if the cards hash drops to zero?

[Dowper_]

RTX 4090 - Flux Hashrate & Profit - https://www.youtube.com/watch?v=RsyTfPgCIyc
My test - RTX 4090 on Flux with lolMiner.

[jgonzi]

RTX 4090 - Flux Hashrate & Profit - https://www.youtube.com/watch?v=RsyTfPgCIyc
My test - RTX 4090 on Flux with lolMiner.

Nice Video and nice GPU enjoy it!!

[Dowper_]

RTX 4090 - Flux Hashrate & Profit - https://www.youtube.com/watch?v=RsyTfPgCIyc
My test - RTX 4090 on Flux with lolMiner.

Nice Video and nice GPU enjoy it!!

Thank you! I have a new video with lolMiner: RTX 4090 - Beam Hashrate & Profit - https://www.youtube.com/watch?v=JTVoRBI0CgY

[igotek]

What is the discord for lolminer ?

[FP91G]

lolMiner 1.62
Changes
Added basic support for Intel Arc Desktop GPUs on the following algorithms: ETC, ETC+KAS (1), Kaspa, Flux, Ergo, Beam (2) & Equihash 144/5 (2). Fees are equal to Nvidia and AMD GPUs on the corresponding algorithms. Tested Intel OpenCL driver versions are 22.24.23453 and 22.32.23937.
Added support for mining Alephium in non-dual mode for Nvidia Pascal GPUs and newer. Use --algo ALEPH to mine it. Fee is 0.75%.
Slight performance improvement for Kaspa non-dual on Nvidia GPUs.
Added Aeternity Cuckoo 29 & Grin Cuckatoo 32 kernels for RX 6600 and RX 6700 series GPUs.
Updated web ui for supporting Intel GPUs, more pools and coins.
--cclk for locking core clock and --mclk for locking memory clock now work for Nvidia Pascal and Turing GPUs (3).
If --cclk or --mclk are used to lock clocks, these will now be reset on lolMiner exit.
Added reading of junction temperature and memory temperature for Nvidia GPUs for drivers 515 or newer.
Re-arranged nonce consumption for Kaspa to allow pools with 3 bytes extra-nonce without (too many) duplicate shares.
Linux: Added reading of GPU power draw and core clock on Intel Arc GPUs.
(1) Only on the 8G+ Intel GPUs: A580, A750 and A770.
(2) Beam and Equihash are experimental on Intel GPUs. Also see known issues when running multiple cards.
(3) Needs admin / sudo privileges. Tested 460.93 driver and higher. --mclk should only be used to mine core intense coins like Kaspa or Aleph in order to reduce power draw by the memory. Recommended value in this case: 810.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.62

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0

What is the discord for lolminer ?

I don't know the official lolminer discord.
All questions can be discussed in any chat for miners.

[ScalperBTC]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

[FP91G]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

What is the difference from the dual mining settings with the Кaspa coin?
https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-to-configure-Dual-Mining-ETH-ETC-UBQH---KASPA

[Divinity666]

Has anyone compared lolminer vs miniZ on flux with ampere cards? Is miniZ still faster?

[styleshifter]

When will the windows version of lolMiner 1.62 be released?

[sxemini]

When will the windows version of lolMiner 1.62 be released?

In the next few minutes i think. In the telegram group lolliedieb posted a win version for 1.62.

[ScalperBTC]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

What is the difference from the dual mining settings with the Кaspa coin?
https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-to-configure-Dual-Mining-ETH-ETC-UBQH---KASPA

https://bitcointalk.org/index.php?topic=2759935.msg61089782#msg61089782

KASPA has a different algorithm - KHeavyhash

[FP91G]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

What is the difference from the dual mining settings with the Кaspa coin?
https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-to-configure-Dual-Mining-ETH-ETC-UBQH---KASPA

https://bitcointalk.org/index.php?topic=2759935.msg61089782#msg61089782

KASPA has a different algorithm - KHeavyhash

If KHeavyhash and Heavyhash are similar algorithms, then what is stopping you from starting dual mining?
If when you start dual mining with Heavyhash, the hashrate drops a lot on two coins, then this makes no sense.
When the guides come out, the profit will already end.

[ScalperBTC]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

What is the difference from the dual mining settings with the Кaspa coin?
https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-to-configure-Dual-Mining-ETH-ETC-UBQH---KASPA

https://bitcointalk.org/index.php?topic=2759935.msg61089782#msg61089782

KASPA has a different algorithm - KHeavyhash

If KHeavyhash and Heavyhash are similar algorithms, then what is stopping you from starting dual mining?
If when you start dual mining with Heavyhash, the hashrate drops a lot on two coins, then this makes no sense.
When the guides come out, the profit will already end.

Unfortunately, I cannot set up dual mining. I want to mine a second coin on Zergpool and receive payouts in ETH. To do this, I specified the following in the LolMiner settings (in Advanced configuration options):

Code:

--ethstratum ETHPROXY
--dualmode KASPADUAL
--dns-over-https 1
--tls on
--dualpool stratum+tcp://heavyhash.mine.zergpool.com:5137
--dualuser 0xmyETHaddress9
--dualpass c=ETH,mc=OBTC

In LolMiner, to mine the second coin, you must specify --dualmode and select ONLY! from what is! And this: either ALEPHDUAL or KASPADUAL or TONDUAL. I chose KASPADUAL but it didn't work and mining didn't start...

Or am I not understanding something? If so, can you help me with setting up dual mining for the heavyhash algorithm?

[FP91G]

lolMiner 1.63

Changes
Improved the Kaspa only mining performance on Nvidia Turing, Ampere and Ada GPUs by about 3.5%. (1)
Significantly improved the Kaspa only mining energy efficiency on Nvidia Turing, Ampere and Ada GPUs by 7-11% depending on the actual model.
Values given to --dualfactor parameter will now be value checked and rounded / capped to working values.
(1) Can be higher in case the card was power limited before.

Fixes
Fixed a bug causing the miner to show a crash message when lolMiner was ended via ctrl+c
Fixed a bug causing lolMiner not to start Kaspa mining on Nvidia GPUs when the Nvidia OpenCL installation on the system is broken.

https://github.com/Lolliedieb/lolMiner-releases/releases/tag/1.63

Check all links with this post from the developer.
https://bitcointalk.org/index.php?topic=4724735.0



https://t.me/koliamainer/8397

[sxemini]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

What is the difference from the dual mining settings with the Кaspa coin?
https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-to-configure-Dual-Mining-ETH-ETC-UBQH---KASPA

https://bitcointalk.org/index.php?topic=2759935.msg61089782#msg61089782

KASPA has a different algorithm - KHeavyhash

If KHeavyhash and Heavyhash are similar algorithms, then what is stopping you from starting dual mining?
If when you start dual mining with Heavyhash, the hashrate drops a lot on two coins, then this makes no sense.
When the guides come out, the profit will already end.

Unfortunately, I cannot set up dual mining. I want to mine a second coin on Zergpool and receive payouts in ETH. To do this, I specified the following in the LolMiner settings (in Advanced configuration options):

Code:

--ethstratum ETHPROXY
--dualmode KASPADUAL
--dns-over-https 1
--tls on
--dualpool stratum+tcp://heavyhash.mine.zergpool.com:5137
--dualuser 0xmyETHaddress9
--dualpass c=ETH,mc=OBTC

In LolMiner, to mine the second coin, you must specify --dualmode and select ONLY! from what is! And this: either ALEPHDUAL or KASPADUAL or TONDUAL. I chose KASPADUAL but it didn't work and mining didn't start...

Or am I not understanding something? If so, can you help me with setting up dual mining for the heavyhash algorithm?

You try to use KASPA dualmode with the heavyhash algo? So you see your failure? Kaspa is not heavyhash - so you can´t mine heavyhash on zergpool with lolminer - lolminer only Kheavyhash support no heavyhash. You must use SRBminer

[ScalperBTC]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

What is the difference from the dual mining settings with the Кaspa coin?
https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-to-configure-Dual-Mining-ETH-ETC-UBQH---KASPA

https://bitcointalk.org/index.php?topic=2759935.msg61089782#msg61089782

KASPA has a different algorithm - KHeavyhash

If KHeavyhash and Heavyhash are similar algorithms, then what is stopping you from starting dual mining?
If when you start dual mining with Heavyhash, the hashrate drops a lot on two coins, then this makes no sense.
When the guides come out, the profit will already end.

Unfortunately, I cannot set up dual mining. I want to mine a second coin on Zergpool and receive payouts in ETH. To do this, I specified the following in the LolMiner settings (in Advanced configuration options):

Code:

--ethstratum ETHPROXY
--dualmode KASPADUAL
--dns-over-https 1
--tls on
--dualpool stratum+tcp://heavyhash.mine.zergpool.com:5137
--dualuser 0xmyETHaddress9
--dualpass c=ETH,mc=OBTC

In LolMiner, to mine the second coin, you must specify --dualmode and select ONLY! from what is! And this: either ALEPHDUAL or KASPADUAL or TONDUAL. I chose KASPADUAL but it didn't work and mining didn't start...

Or am I not understanding something? If so, can you help me with setting up dual mining for the heavyhash algorithm?

You try to use KASPA dualmode with the heavyhash algo? So you see your failure? Kaspa is not heavyhash - so you can´t mine heavyhash on zergpool with lolminer - lolminer only Kheavyhash support no heavyhash. You must use SRBminer

I know that Kaspa is a different algorithm.  Therefore, I ask lolMiner developers to make it possible to mine the HavyHash algorithm...

As far as I know, SRBminer is for red (AMD), and I have all the cards from Nvidia.  So, SRBminer won't work for my video cards... Unfortunately...

[jgonzi]

Can you add to mining ETC / ETH, mining a second coin on the Heavyhash algorithm?

What is the difference from the dual mining settings with the Кaspa coin?
https://github.com/Lolliedieb/lolMiner-releases/wiki/Guide-to-configure-Dual-Mining-ETH-ETC-UBQH---KASPA

https://bitcointalk.org/index.php?topic=2759935.msg61089782#msg61089782

KASPA has a different algorithm - KHeavyhash

If KHeavyhash and Heavyhash are similar algorithms, then what is stopping you from starting dual mining?
If when you start dual mining with Heavyhash, the hashrate drops a lot on two coins, then this makes no sense.
When the guides come out, the profit will already end.

Unfortunately, I cannot set up dual mining. I want to mine a second coin on Zergpool and receive payouts in ETH. To do this, I specified the following in the LolMiner settings (in Advanced configuration options):

Code:

--ethstratum ETHPROXY
--dualmode KASPADUAL
--dns-over-https 1
--tls on
--dualpool stratum+tcp://heavyhash.mine.zergpool.com:5137
--dualuser 0xmyETHaddress9
--dualpass c=ETH,mc=OBTC

In LolMiner, to mine the second coin, you must specify --dualmode and select ONLY! from what is! And this: either ALEPHDUAL or KASPADUAL or TONDUAL. I chose KASPADUAL but it didn't work and mining didn't start...

Or am I not understanding something? If so, can you help me with setting up dual mining for the heavyhash algorithm?

You try to use KASPA dualmode with the heavyhash algo? So you see your failure? Kaspa is not heavyhash - so you can´t mine heavyhash on zergpool with lolminer - lolminer only Kheavyhash support no heavyhash. You must use SRBminer

I know that Kaspa is a different algorithm.  Therefore, I ask lolMiner developers to make it possible to mine the HavyHash algorithm...

Problem is also the number of coins that supper Heavyhash, and if it will be able to get all the possible amount of new miners, that will make it not profitable too.