GMiner v3.44 Dero/Karlsen/Radiant/Ergo+IronFish+ZIL/KAWPOW/Equihash/Cortex

[dedizonesv2]

switching over from Phoenixminer,  
would appreciate some quick help on RTX 3000 series  (no LHR)
what parameters are recommended for these cards?  

3060ti
3070
3090

I use cclock and clock and power limit

is there a use for  lock clock , lock voltage and ccdvc  on RTX 3000 series?

would locking clock better than limiting ?

on hiveOs

3060Ti 1410 / 2200 or 2400 / 150
3070 1070 / 2200 or 2400 / 150
3080 1060 / 2200 or 2400 / 230 ( on my rig suprim X 3080)

Fan 65%

[Sergey2015]

Hello Everyone, help me set up a batch file with  parameters mt
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4

[WARMANGALAXY]

Hello Everyone, help me set up a batch file with  parameters mt
miner.exe --algo etchash --server etc-eu2.nanopool.org:19999 --user 0x...........0.MyRiG --mt 4

'--mt' - space-separated list of memory tweak numbers for each device (range from 0 to 6, 0 - disable tweaks), only Nvidia GPUs with GDDR5X and GDDR5 memory are supported, requires running miner with admin privileges (for example: '1 3 5')

[rme30]

Will GMiner include the Autolykos2 algo for ERGO mining in next versions?

[WARMANGALAXY]

Will GMiner include the Autolykos2 algo for ERGO mining in next versions?

no

[Ramsete2]

I noticed that GMiner is consuming system RAM over time, till forcing the reboot of the rig.
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?

[Zminer777]

GMiner v2.67 available for download

v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal

Ethash fee is 0.65%
KAWPOW fee is 1%

[aclass]

Should the power draw be highly volatile... jumping up and down every couple of seconds?

GMiner v2.67 available for download

v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal

Ethash fee is 0.65%
KAWPOW fee is 1%

[ManuBBXX]

GMiner v2.67 available for download

v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal

Ethash fee is 0.65%
KAWPOW fee is 1%

How much can we expect without rejects / lock shares with a 3080 lhr ?

[Ramsete2]

I noticed that GMiner is consuming system RAM over time, till forcing the reboot of the rig.
This is happening just on my AMD rig, not on the NVidia ones.
Any solutions/ideas?

Nobody could help me?
Unfortunately I'm forced to use another miner, since I got this problem just with GMiner...

[darkdrive]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

[dedizonesv2]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

what rugle on firewall, possible post here your script firewall ?

tks

[miner29]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

Why do you have any info on your mining rig?

Rig should only be for mining.  As for access to ip its usually for dev pool update / check for miner update.

[darkdrive]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

Why do you have any info on your mining rig?

Rig should only be for mining.  As for access to ip its usually for dev pool update / check for miner update.

Do you think that all people mining on 100500gpus? I have a few rigs for mining + Im mining on my work/gaming PC. I have 3080ti in it, so why not? Well I don't care about my rigs, and I'm care about my work pc, cuz it have important info. As I said, 81.4.110.148 is not public pool IP, so it's not for devfee. Next step is updates: Gminer haven't autoupdate as I can see. Looks like a bullshit. 2.67 is first version that won't start with block all IP's exept my pool IP. I used a lot of other mining software, and all of them works perfect with only POOL ip allowed.
A lot of people use mining software in work PC, so I posted it for them - be aware, cuz looks like Gminer can collect and send info from PC

p.s. Devs can use all public pools for taking DEVFEE(All mining software use it). So there is no reason to connect 3rd party IP.

[darkdrive]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

what rugle on firewall, possible post here your script firewall ?

tks

I used comodo firewall (windows). Rule is:
1: Block all outgoinig connections
2(more priority) : Allow outgoining connection to Ethermine IP
 
As I said 2.66 works perfect with this rules. And 2.67 not, cuz it want to connect 81.4.110.148

[igotek]

GMiner v2.67 available for download

v2.67
+ partial LHR cards unlock without additional power consumption
+ use --lhr 1 to force enable unlock for RTX 3060 V1
+ use --lhr_tune1/lhr_tune2 to tune unlock parameters, positive values increase performance, negative values decrease probability of lock
+ miner requires latest Nvidia drivers(470+), to update Nvidia drivers under Hive OS run "nvidia-driver-update" command in terminal

Ethash fee is 0.65%
KAWPOW fee is 1%

What is the hashrate for RTX3060 12GB v1 ?
I have installed the NVIDIA driver v460.39 on my HiveOS.
There are 12 GPUs running on a rig.
I get 442.0 MH/s with lolminer.

I have just tried gminer on this rig. The hashrate isnt stable.
I didnt installed the latest driver since v460.39 gives good hashrate with lolminer.
I will install the lastest NVIDIA driver if you tell me the hasrate will be upper than lolminer.
I see gminer gives 31 mh for each gpu: https://www.youtube.com/watch?v=39iShnFssBE

[dedizonesv2]

Be aware!  gminer 2.67 trying to connect 3rd-party IP - 81.4.110.148 at start. If you will try to deny this connection with Firewall -  miner will not start. I've opened issue on the official github page, but still no answer from devs.
It's not devfee pool IP. It's some unknown suspicious IP to which private information can be transmitted from your PC.
p.s. Gminer 2.66 works perfect with block all ips except of my Pool's IP.

Why do you have any info on your mining rig?

Rig should only be for mining.  As for access to ip its usually for dev pool update / check for miner update.

Do you think that all people mining on 100500gpus? I have a few rigs for mining + Im mining on my work/gaming PC. I have 3080ti in it, so why not? Well I don't care about my rigs, and I'm care about my work pc, cuz it have important info. As I said, 81.4.110.148 is not public pool IP, so it's not for devfee. Next step is updates: Gminer haven't autoupdate as I can see. Looks like a bullshit. 2.67 is first version that won't start with block all IP's exept my pool IP. I used a lot of other mining software, and all of them works perfect with only POOL ip allowed.
A lot of people use mining software in work PC, so I posted it for them - be aware, cuz looks like Gminer can collect and send info from PC

p.s. Devs can use all public pools for taking DEVFEE(All mining software use it). So there is no reason to connect 3rd party IP.

I completely agree, we should also be able to choose between the costs in continuous or action per minute (like TREX, lolminer)

I am not a big fanatic of minors who uses my resources invisibly and in addition continuously, because nothing prevents you from taking more at times!

in addition your explanations are not clear! Thank you for being clear and precise, and tell us what is happening with this ip on our rigs.

[lorditshot]

I decided to try out/switch over, and I'm trying to get it overclocks to work in my command line but when I do it, it tells me I need to run the miner with admin privileges for my AMD cards (I am running it in admin; mixed rig, NVIDIA cards are working). Has anyone else had this issue/is there a workaround/fix?

[edisonchan]

What is the best lhr unlock setting for RTX 3070 TI FE?
I have try --lhr_tune1 1 / --lhr_tune1 -3, the hashrate would drop down to about 30 from 56 in a few mins.

[Zminer777]

GMiner v2.68 available for download

v2.68
+ detect lock of LHR GPUs, automatically unlock and continue mining
+ display of miner restart count by watchdog

Ethash fee is 0.65%
KAWPOW fee is 1%