philipma1957
Legendary
Online
Activity: 4242
Merit: 8494
'The right to privacy matters'
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2019, 09:06:14 PM Last edit: June 09, 2019, 02:05:09 PM by frodocooper |
|
yeah my 2 fan setup does very well at freq 767.5 and volt 7 setting.
|
|
|
|
Sh4d0wC457
Newbie
Offline
Activity: 3
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2019, 06:15:29 AM |
|
Hello, today a newpac arrived and I want to adjust the core voltage. But I only can find measure points for 2pac devices? One image in this point is very small I found where I can measure core voltage on newpac but the big image is not opening. Is there a bigger one? Greets
|
|
|
|
gt_addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2019, 08:31:23 AM |
|
Hello, today a newpac arrived and I want to adjust the core voltage. But I only can find measure points for 2pac devices? One image in this point is very small I found where I can measure core voltage on newpac but the big image is not opening. Is there a bigger one? Greets
You shouldnt need to adjust the core voltage on the newpac. All 6 of mine run stock voltage at 600m getting 134ghs each. You can measure the core voltage and the details are within the last couple of pages.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
minefarmbuy
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 1022
Merit: 221
We are not retail.
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2019, 02:34:24 PM |
|
Yea, I've never adjusted vcore on a newpac either.
|
|
|
|
mstrozier
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 114
Merit: 151
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2019, 02:44:43 PM Last edit: June 09, 2019, 02:05:51 PM by frodocooper |
|
Like the others have stated I haven't had to change my core voltage on the newpacs either. Any reason why you are looking or needing to change the core voltage? I run mine at 400Mhz which pulls a steady 90.7Gh/s. With enough cooling you can go higher as others have. And thinking of cooling @philipma1957 these fans after running for 24 hours made a nice difference on my R606's. I had one unit that no matter the voltage it kept plateau on anything over 681MHz. Now that I have installed the fans both units, they are running at 725Mhz averaging 982.9Gh/s each with no ASIC resets on volt setting 6. ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
sidehack
Legendary
Offline
Activity: 3374
Merit: 1859
Curmudgeonly hardware guy
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2019, 02:46:08 PM |
|
If you're going to run them at low speed (100-300MHz) you can probably even turn it down. Poking between ground (say, the USB jack) and the two exposed pads just above center will get you the voltage across 1 chip, and across both chips. If you're just tuning, set your speed and then adjust up if it's unstable (low hashrate, high errors) or adjust down until it stops being stable then turn it back up a little bit. You can do a lot just by watching the numbers in cgminer. VH's auto-tuning routines make this even easier by testing for stability for you.
|
|
|
|
mobomofo
Jr. Member
Offline
Activity: 88
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2019, 08:08:48 PM |
|
On my R606 - the three red voltage lights are blinking on/off every second. How do I set the voltage to lock them in - ie to remain lit?
|
|
|
|
gcanelson
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 110
Merit: 56
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2019, 02:56:31 AM Last edit: June 09, 2019, 02:07:10 PM by frodocooper Merited by frodocooper (1) |
|
I took the `pause' out of the cgminer statement(s) so they'd loop if necessary, and I have restarted the two instances that have been dropping out. Everything looks normal so far, I'll report back on this, say Monday or Tuesday.
So... naturally both cgminer instances have been chugging away - and both show the start date as last Friday - no looping required... Maybe we scared them! At any rate, I'll keep an eye on these two rascals.
|
The block, an obstacle in the path of the weak, became a stepping-stone in the path of the strong.
|
|
|
419mining
Copper Member
Full Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif) ![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 190
Merit: 111
https://www.419mining.com
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 05, 2019, 07:57:45 PM Last edit: June 09, 2019, 02:07:25 PM by frodocooper Merited by frodocooper (1) |
|
On my R606 - the three red voltage lights are blinking on/off every second. How do I set the voltage to lock them in - ie to remain lit?
This has to do with the temperature sensor, its a warning saying there is a problem. you should still be able to set your voltage though. Talked to the seller you purchased your R606 from, they should be able to assist you further.
|
|
|
|
mobomofo
Jr. Member
Offline
Activity: 88
Merit: 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 06, 2019, 03:05:10 AM Last edit: June 09, 2019, 02:07:57 PM by frodocooper |
|
This has to do with the temperature sensor, its a warning saying there is a problem. you should still be able to set your voltage though. Talked to the seller you purchased your R606 from, they should be able to assist you further.
Thank you 419mining!
|
|
|
|
kingofhammers
Newbie
Offline
Activity: 21
Merit: 7
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 07, 2019, 12:19:13 AM Last edit: June 09, 2019, 02:08:54 PM by frodocooper Merited by frodocooper (3) |
|
So after a while of running these little machines I have an update. I'm running on a Pi and getting exactly what was advertised, here's a cgminer screenshot: https://imgur.com/qnqb71q. I'm on power setting 4 and am pulling roughly 78W per unit so ~1TH/s at 100W, which is pretty damn good for how quiet these things are. I did end up changing my power supply a few weeks ago to a SeaSonic SSR-650FX which handles the load easily. Also much quieter than the bitmain AWM7 or whatever that turbo induction power supply was. I'm not sure if I'm on the most current version of VH's cgminer, everything is running pretty well so I see no need to change it. It looks like if I were to upgrade my cpu and run an actual computer as the controller I'd be able to squeeze a bit more hash power from these units without incurring a significant power draw. But I haven't gotten around to wiping windows off an older HP machine and doing an Ubuntu build, I might never get around to it, who knows.
|
|
|
|
DieselWeaseI
Newbie
Offline
Activity: 22
Merit: 15
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 07, 2019, 02:16:53 AM Last edit: June 09, 2019, 02:10:13 PM by frodocooper |
|
yup...you're topping off right where I was at when I was on the pi. I'm loving my Odroid N2 setup being able to turn it up all the way if I want. I've settled at 700MHz for my R606 and have my early Father's Day gift (Newpac) running at 500MHz.
The N2 is a bit overkill cost-wise for a basic miner controller, but I'm also going to try running some staking wallets on it as well as my cgminer for the Gekko stuff and bfgminer for the Futurebit stuff.
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 09, 2019, 02:29:30 AM Last edit: June 09, 2019, 02:11:03 PM by frodocooper |
|
I am simply going to get mine up on a laptop.
Anyone here using Lunbuntu? (Light Unbuntu) I assume that will work fine?
I have a mess of old Compaq Evo N800v 'evil' 1gb ram laptops. Older than dirt. Completely unsuitable for anything above Win XP, nor are they suitable it seems for regular Unbutu 14.01 or above. They were used to monitor the KNC Scrypt Miners in my Basement (free heat) over the years. Thus, will try those bricks first. I assume...being near the 'evil' KNC Titans in my basement (which the 'evil' KNC Titans would try to brick themselves on any 'eye contact' or 'sense of fear' on your part in daring to go into the basement...or whatever...yeah..they were that evil).
I figured I'd better ask if Lunbuntu is even possible to run this stuff before I fire them up and try. Truthfully, Lunbuntu is the ONLY version I've found that worked. Indeed, this could be all moot with the newest version of Lunbuntu.
Thanks
Brad
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
kano
Legendary
Offline
Activity: 4592
Merit: 1851
Linux since 1997 RedHat 4
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2019, 02:35:07 AM |
|
Xubuntu is pretty light also - it's just ubuntu with xfce4 instead of that other bloated trash ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 10, 2019, 06:01:02 PM Last edit: June 12, 2019, 11:39:05 AM by frodocooper |
|
Xubuntu is pretty light also - it's just ubuntu with xfce4 instead of that other bloated trash ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Well...Lunbuntu does not work, I guess that is the next step to use Xunbuntu. Good to have options. I could use a 'real' laptop, but not unless I have to. As to the Pi option, that may be beyond my skill set. I am from the KNC Titan ASIC 'plug and play' days. As soon as you say cgminer and start tossing around cgminer instructions, I get very nervous. I'm so lame I sold my old gekko USB sticks because I could never figure out how to get them up (this was with help). Indeed I am that clueless. The GekkoMiner r606 has been sitting here a couple of weeks I suppose I SHOULD finally toss it up or make a valiant attempt. But then again, being clueless does have it's downsides. This will be a 'crowning achievement' if I pull it off. edit: (Then we can move on to the Bitcoin Hub that I did get up a year or so ago, and it is now down, the Bitmain USB hub for LTC, which 'seems' to be still working. But not the Bitmain USB hub for LTC, that I can't seem to get to work in any manner. So it goes, my goals are high, my skills are few. ![Sad](https://bitcointalk.org/Smileys/default/sad.gif)
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
os2sam
Legendary
Offline
Activity: 3582
Merit: 1094
Think for yourself
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2019, 09:44:38 AM |
|
As to the Pi option, that may be beyond my skill set.
I'm not quite sure if your asking for help/suggestions or not?? Here's a link to mstroziers instructions on setting up a Pi. They helped me and made me a little more comfortable in using Linux in general. https://bitcointalk.org/index.php?topic=5053833.msg50968875#msg50968875
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2019, 08:08:08 PM Last edit: June 12, 2019, 11:39:45 AM by frodocooper |
|
I'm kinda talking tongue in cheek..however, I really did never get a USB stick to work..or any much-using ubuntu to get something up...so with many hours of past failures...I think the old Compaq Evo N800v (1gb ram) ...never to see beyond windows xp (too lame) running Lunbuntu is my best bet. I have a mess of these. I have to walk before I can run. Never having ANY luck with any miner what was not, not plug and play has 'scar'd' me indeed ![Sad](https://bitcointalk.org/Smileys/default/sad.gif) An ASIC baby indeed.
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
gt_addict
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2019, 09:14:51 PM Last edit: June 12, 2019, 11:40:04 AM by frodocooper |
|
I was in the same boat until a year or so ago when sidehack brought out the compacs. I set up my own raspi mini rig with three of them running. Total noob with raspi and its associated programming "stuff" but I managed it with the help of members here. Once it was setup it was just having fun tweaking it and getting it to run stable. Nowadays with sidehacks gear and vh's cgminer its a doddle. The help on here is fantastic and is my first port of call for anything mining and most computer based questions aswell.
|
**SUPPORT SIDEHACK** Miner Development Donations to: 1BURGERAXHH6Yi6LRybRJK7ybEm5m5HwTr
Donations/Tips to:- 1GTADDicTXD1uachKKgW24DZDxDGhSMdRa
Join Bitconnect: https://bitconnect.co/?ref=gtaddict
|
|
|
os2sam
Legendary
Offline
Activity: 3582
Merit: 1094
Think for yourself
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2019, 09:44:49 PM |
|
old Compaq Evo N800v (1gb ram) ...never to see beyond windows xp (too lame) running Lunbuntu is my best bet. I have a mess of these.
I don't know why Ubuntu wouldn't run on 1GB RAM. Win 7 runs fine on 1GB and I had Ubuntu 16.04 running fine on 2GB. WinXP is the least lame Windoze version there is that's still usable. That's what I'm running on this old laptop and it still keeps chugging along just fine.
|
A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing on usenet and in e-mail?
|
|
|
Searing
Copper Member
Legendary
Offline
Activity: 2898
Merit: 1464
Clueless!
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 11, 2019, 09:49:01 PM Last edit: June 12, 2019, 11:40:34 AM by frodocooper |
|
Unbuntu 14.01 (?) or whatever stopped working on the Compaq Evo N800v so then I went to Lunbuntu (whatever latest ver is I assume will still work).
Not gonna use Window xp...just saying...
Sorry, have issues...my first miner was a KNC Jupiter Miner 2013...was just plug/play firmware (crappy for a start..but hey)
Still, have not even unboxed my gekkoscience r606 yet....stalling for the above reasons and past failures..(ie yech)...probably just psyching myself out...
|
Old Style Legacy Plug & Play BBS System. Get it from www.synchro.net. Updated 1/1/2021. It also works with Windows 10 and likely 11 and allows 16 bit DOS game doors on the same Win 10 Machine in Multi-Node! Five Minute Install! Look it over it uninstalls just as fast, if you simply want to look it over. Freeware! Full BBS System! It is a frigging hoot!:)
|
|
|
|