Claymore's CryptoNote AMD GPU Miner v11.3

[kama]

is there any nvidia supported version of this miner ?

[Daveeoff]

 Well there be any support for CryptoNight-Lite for mining AEON

[DaveyJones]

Well there be any support for CryptoNight-Lite for mining AEON

Also waiting for that

[Lloydimiller4]

Will this miner work on an ATI R9 390 GPU?

Asking for a friend, sorry if it has been asked/answered before, I didn't see.

[Scann0r]

I need help with this Miner. How the fuck can I set up the commands?
This console is always closing and generating the log file with errors.
Can somebody explain me how to configure this Miner?
It wasn´t written here where to write all this commands etc...

I have i7 5930k and R9 280x

[bileq]

i guess -tt 90 command did not work on my card. i see 100C and stop that

[Shrikez]

Am I correct in assuming the latest version for Linux is 9.1?

[Litoshi]

I am running a 4X AMD 290X GPU miner, Win 7, 20GB VM, 8 GB RAM, on a DSL connection.  Claymore version 9.2Beta.

While mining XMR on moneropool,  I get "yourIPisBanned" frequently due to "lowdifficutshare".  

I have used the default settings for the miner, as well as the -h dialed down to 960 from 1280.  Did not have an effect.

I am getting the same prompt now from Dwarfpool.

I used this miner successfully for months. but now it throws the LowDiff all the time.

Any thoughts?

edited:  I updated to 9.3 and 15.11 drivers.  Still getting LowDifficultyShare on all shares.  Tried all the -a options, 1-4, with same result. 

Miner works great with SGminer for other coins for last 2 years. 

[ph.amracyshop]

How about for Linux?

[Litoshi]

I am running a 4X AMD 290X GPU miner, Win 7, 20GB VM, 8 GB RAM, on a DSL connection.  Claymore version 9.2Beta.

While mining XMR on moneropool,  I get "yourIPisBanned" frequently due to "lowdifficutshare".  

I have used the default settings for the miner, as well as the -h dialed down to 960 from 1280.  Did not have an effect.

I am getting the same prompt now from Dwarfpool.

I used this miner successfully for months. but now it throws the LowDiff all the time.

Any thoughts?

edited:  I updated to 9.3 and 15.11 drivers.  Still getting LowDifficultyShare on all shares.  Tried all the -a options, 1-4, with same result. 

Miner works great with SGminer for other coins for last 2 years. 

Of course it is, you're running 15.11 drivers.

The problem started while using the series 14 driver.  Miner 9.2 worked great for almost a year, then suddenly started throwing the lowdiffshares.  Unable to figure out the problem, since nothing had changed on my end, I updated to 9.3 and the 15 series drivers, but still getting the lowdiffshare right away.

Since the same problem occurs on Dwarfpool and moneropool, I know it is the miner, not the pool.

What else should I try?

[GingerAle]

I am running a 4X AMD 290X GPU miner, Win 7, 20GB VM, 8 GB RAM, on a DSL connection.  Claymore version 9.2Beta.

While mining XMR on moneropool,  I get "yourIPisBanned" frequently due to "lowdifficutshare".  

I have used the default settings for the miner, as well as the -h dialed down to 960 from 1280.  Did not have an effect.

I am getting the same prompt now from Dwarfpool.

I used this miner successfully for months. but now it throws the LowDiff all the time.

Any thoughts?

edited:  I updated to 9.3 and 15.11 drivers.  Still getting LowDifficultyShare on all shares.  Tried all the -a options, 1-4, with same result. 

Miner works great with SGminer for other coins for last 2 years. 

Of course it is, you're running 15.11 drivers.

The problem started while using the series 14 driver.  Miner 9.2 worked great for almost a year, then suddenly started throwing the lowdiffshares.  Unable to figure out the problem, since nothing had changed on my end, I updated to 9.3 and the 15 series drivers, but still getting the lowdiffshare right away.

Since the same problem occurs on Dwarfpool and moneropool, I know it is the miner, not the pool.

What else should I try?

Maybe u burnt out your cards. Try pulling them out and doing one at a time? Or check the actual video output to see if the card still functions properly. I don't know how to diagnose hardware problems

[Litoshi]

I am running a 4X AMD 290X GPU miner, Win 7, 20GB VM, 8 GB RAM, on a DSL connection.  Claymore version 9.2Beta.

While mining XMR on moneropool,  I get "yourIPisBanned" frequently due to "lowdifficutshare".  

I have used the default settings for the miner, as well as the -h dialed down to 960 from 1280.  Did not have an effect.

I am getting the same prompt now from Dwarfpool.

I used this miner successfully for months. but now it throws the LowDiff all the time.

Any thoughts?

edited:  I updated to 9.3 and 15.11 drivers.  Still getting LowDifficultyShare on all shares.  Tried all the -a options, 1-4, with same result. 

Miner works great with SGminer for other coins for last 2 years. 

Of course it is, you're running 15.11 drivers.

The problem started while using the series 14 driver.  Miner 9.2 worked great for almost a year, then suddenly started throwing the lowdiffshares.  Unable to figure out the problem, since nothing had changed on my end, I updated to 9.3 and the 15 series drivers, but still getting the lowdiffshare right away.

Since the same problem occurs on Dwarfpool and moneropool, I know it is the miner, not the pool.

What else should I try?

Maybe u burnt out your cards. Try pulling them out and doing one at a time? Or check the actual video output to see if the card still functions properly. I don't know how to diagnose hardware problems

I am able to mine with sgminer for DASH and other coins.  Cards work fine for that.  SO it is not the cards.

[atp1916]

Will this miner work on an ATI R9 390 GPU?

Asking for a friend, sorry if it has been asked/answered before, I didn't see.

Yes - the 390 is a 290 (architecture-wise).

[Abirdg]

I have ATI 5450 2 GB card, Catalyst 13.12,Windows 7 x64.
I'm using MinerGate pool.
Given settings are
NsGpuCNMiner64 -o stratum+tcp://bcn.pool.minergate.com:45550 -u YOUR_EMAIL -p x
I don't know programing from multimedia baground.
Claymore Crypto Note GPU miner is showing MISSING COMMAND LINE.
Please help me by informing how to write COMMAND LINE and where.
Thanks for reading.

[karmenali]

how can i solo mining  bcn on claymore cpu miner ?

[GingerAle]

how can i solo mining  bcn on claymore cpu miner ?

you need to setup a private pool, which is no small task.

[karmenali]

how can i solo mining  bcn on claymore cpu miner ?

you need to setup a private pool, which is no small task.

how can i setup private pool ?

[aiwe]

Maybe it's a stupid question. How do I select for mining with Claymore one card of two? Thanx in advance.

[Abirdg]

where to download the command line ?

[tittiecoiner]

I have ATI 5450 2 GB card, Catalyst 13.12,Windows 7 x64.
I'm using MinerGate pool.
Given settings are
NsGpuCNMiner64 -o stratum+tcp://bcn.pool.minergate.com:45550 -u YOUR_EMAIL -p x
I don't know programing from multimedia baground.
Claymore Crypto Note GPU miner is showing MISSING COMMAND LINE.
Please help me by informing how to write COMMAND LINE and where.
Thanks for reading.

Try
NsGpuCNMiner64.exe -o stratum+tcp://bcn.pool.minergate.com:45550 -u YOUR_EMAIL -p x
as your command is for Linux