Claymore's CryptoNote AMD GPU Miner v11.3

[icelove]

No scores since there is no current miner for XMR and NVIDIA cards.
So nothing to compare the old miner (tsiv) i used form 09/2014 and CUDA5.5 gave me 450MH/s for XMR.

Currently mining Lbry and having 370-500 MH/s depending on the diff ..in decred I have also ~3800MH/s

3800H/s or 3800MH/s ?

[rednoW]

gtx1070 does more then 600h/s - but this is not good too

[ioglnx]

MH/s as i wrote..but in my pool i'm the slowest with just one GTX1080 and on Xeon E5-1650V3 making 3.4MH/s
Currently GTX | Xeon
accepted: 772/773 (99.87%), 373.40 MH/s yes! | accepted: 92/92 (100%), 134.48 MH, 3356.60 kH/s yes!

XMR just 450H/s with the old CUDA miner..so I don't mine XMR - XCN/DECRED/LBRY I mine.
Atm I make 4 LBRY per hour. While the top performer in my pool does 5800 o.O 3.5 BTC..gosh

[lttsi]

We need a monitor same ETHman ....

[hawkfish007]

I am getting this message on dwarfpul when trying to see worker stat

"You cannot mine to eny exchange without payment_id !
Please add it like here:
47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.xxxxxxxxxx"

My .bat is

"NsGpuCNMiner.exe -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.13fe7a076b9e105df7dfeb32c5a959d7de3e09a32cf84499cd6ad201a787ad 4b.1 -p x -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyB.....paymentID.1 -p x"

What am I doing wrong?

Thanks.

[Tmdz]

Great miner thanks Claymore

Im really liking the lower power consumption over Ethash and all my gpus are running much cooler.   The high profit of this coin is vanishing rapidly though.

If I had to throw un uneducated number I would say this miner uses 20% less electricity over EThash.

[Yerba]

Still could not find how can I use -worker name option in my bat file? Mining in dwarfpool to poloniex.

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u poloniex wallet.my wallet -p mail@mail.com

[Bojcha]

I am getting this message on dwarfpul when trying to see worker stat

"You cannot mine to eny exchange without payment_id !
Please add it like here:
47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.xxxxxxxxxx"

My .bat is

"NsGpuCNMiner.exe -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.13fe7a076b9e105df7dfeb32c5a959d7de3e09a32cf84499cd6ad201a787ad 4b.1 -p x -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.13fe7a076b9e105df7dfeb32c5a959d7de3e09a32cf84499cd6ad201a787ad 4b.1 -p x"

What am I doing wrong?

Thanks.

http://dwarfpool.com/xmr/address?wallet=47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB.13fe7a076b9e105df7dfeb32c5a959d7de3e09a32cf84499cd6ad201a787ad4b

Link fixed.

[hawkfish007]

I am getting this message on dwarfpul when trying to see worker stat

"You cannot mine to eny exchange without payment_id !
Please add it like here:
47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.xxxxxxxxxx"

My .bat is

"NsGpuCNMiner.exe -o stratum+tcp://xmr-usa.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.13fe7a076b9e105df7dfeb32c5a959d7de3e09a32cf84499cd6ad201a787ad 4b.1 -p x -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u 47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGR oyZk3ES1s1V4QVcB.13fe7a076b9e105df7dfeb32c5a959d7de3e09a32cf84499cd6ad201a787ad 4b.1 -p x"

What am I doing wrong?

Thanks.

http://dwarfpool.com/xmr/address?wallet=47sghzufGhJJDQEbScMCwVBimTuq6L5JiRixD8VeGbpjCTA12noXmi4ZyBZLc99e66NtnKff34fHsGRoyZk3ES1s1V4QVcB.13fe7a076b9e105df7dfeb32c5a959d7de3e09a32cf84499cd6ad201a787ad4b

Link fixed.

Thanks, so it seems my rig was hashing. It is showing 4210 h/s, mining with 4 nanos and 2 470s, seems about right?

[hawkfish007]

Still could not find how can I use -worker name option in my bat file? Mining in dwarfpool to poloniex.

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u poloniex wallet.my wallet -p mail@mail.com

I named my rigs 1,2,3 etc. and they are showing on dwarfPool stat page.

[Bojcha]

idk for nano's mine 470's are at 640h/s each.

[muleman8]

Hi All,

I am very new to XMR.  I have been mining ether for 12 months but I am planning to diversify into other coins thus I am looking to move two of my small miners over to XMR.

Claymore, I have been using your ethereum miner for 6 months and it is brilliant and this XMR miner is aso easily setup and works like a charm.

Only a couple of questions though to ensure I have this working ok.  I have a rig with 2 x 7950's getting around 500hs each (1kh total).  The GpU's run much cooler than when mining ethereum with claymore ethereum miner.  The other odd thing is that MSI afterburer shows GPU1 usage 1% and GPU2 usage 0% - how is that so?

Any advice on this much appreciated.

Thanks
M

EDIT: Just checked my second XMR miner and both 7970 and 7950 are reported by MSI afterburner as having GPU usage 64%.  I am baffled as mining ethereum uses 99% GPU with claymore miner...

[citronick]

It's a pretty poor show when a 750ti gets around 850 h/s using less than 150w but a 280x gets a measly 470 h/s using near 220w! The 280x is the more powerful card......

are you sure a GTX 750 ti can reach 800h/s ?: I think one is under 300h/s...

250-280 with default settings, 50-60 watts.

Which are the recent scores on 970,980/ti and the Pascals ?

The 2014 tsiv NVIDIA miner is just too old, it only pushed 400h/s on my 980Ti.

The Claymore miner v9.5 can push my aging R7 370 on my test rig at also 400+h/s

[braiansp]

hello, I have the following error

14:43:07:474   27e8   
14:43:07:475   27e8   ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
14:43:07:475   27e8   º            Claymore CryptoNote GPU Miner  v9.5 Beta            º
14:43:07:475   27e8   ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
14:43:07:675   27e8   Wrong wallet address braiansilveirap@hotmail.com - XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only.
14:43:07:675   27e8   Pool mine.moneropool.com removed from the list
14:43:07:676   27e8   Wrong wallet address braiansilveirap@hotmail.com - XMR/QCN/BCN/FCN/Aeon/Duck/Dash/OEC/MCN/ORION addresses are supported only.
14:43:07:676   27e8   Pool monero.crypto-pool.fr removed from the list

someone could help me solve this?

[Yerba]

Still could not find how can I use -worker name option in my bat file? Mining in dwarfpool to poloniex.

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u poloniex wallet.my wallet -p mail@mail.com

I named my rigs 1,2,3 etc. and they are showing on dwarfPool stat page.

Where did You put rig name?

[hawkfish007]

Still could not find how can I use -worker name option in my bat file? Mining in dwarfpool to poloniex.

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u poloniex wallet.my wallet -p mail@mail.com

I named my rigs 1,2,3 etc. and they are showing on dwarfPool stat page.

Where did You put rig name?

I am using Poloniex address, so walletaddress.paymentID.1 , 1 = rig number, you may not have to use payment id if using your own wallet address.

[Yerba]

Still could not find how can I use -worker name option in my bat file? Mining in dwarfpool to poloniex.

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u poloniex wallet.my wallet -p mail@mail.com

I named my rigs 1,2,3 etc. and they are showing on dwarfPool stat page.

Where did You put rig name?

I am using Poloniex address, so walletaddress.paymentID.1 , 1 = rig number, you may not have to use payment id if using your own wallet address.

I did it so:  walletaddress.paymentID.RIG1-R9-390

And the error is:
Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlogin"}}

When I put just number 1 to rig name, then it is without error.

[Tmdz]

It has to be number only

Use username with any number (integer, any random number)

[CathodeMouse]

On linux last ver. 9.1 - can't normally start mining with 6 GPU 390X. "LowSharedifficulty" .... (((
Maybe u fix that?

[go6ooo1212]

..where can we see some profitability calculator for monero?