Lafu
Legendary
Offline
Activity: 3136
Merit: 3214
|
|
October 07, 2016, 06:44:32 PM |
|
hello, I want to know what would be the commands to mine aeon GPU, I tried to make a bat, I'm atualmente minergate: NsGpuCNMiner, or stratum + tcp: //aeon.pool.minergate.com: 45690 my email -u -p x
but it does not work presents claymore error as a result null = Invalid shares:415
I would also like to know the steps for mining etherum dual-xmr with claymore 9.6 gpu rx 480 for 8gb
FIRST aeon is cryptonite light algo dosent work with this miner second have you ever Read the readme.txt file in your miner foulder? when not, do it!
|
|
|
|
Lafu
Legendary
Offline
Activity: 3136
Merit: 3214
|
|
October 07, 2016, 06:45:58 PM |
|
I could get 620mh with 4gb rx 470 and 750mh with 8gb rx 470 both sapphire nitros
You mean kh/s not mh/s i think
|
|
|
|
XMR-Miner
Newbie
Offline
Activity: 12
Merit: 0
|
|
October 07, 2016, 07:32:14 PM |
|
I could get 620mh with 4gb rx 470 and 750mh with 8gb rx 470 both sapphire nitros
You mean kh/s not mh/s i think I was guessing h/s.
|
|
|
|
XMR-Miner
Newbie
Offline
Activity: 12
Merit: 0
|
|
October 09, 2016, 02:04:52 PM Last edit: October 13, 2016, 03:11:34 AM by XMR-Miner |
|
What causes 'Invalid Share' to be sent to my mining pool? I have a few so far. They deduct some from my total when it happens, so I want to prevent or reduce it as much as possible. [UPDATE] I researched this problem and it is usually overclocking errors or bugs in mining software; others have posted that this miner may send them, though typically only when combined with certain GPUs.
|
|
|
|
jjiimm_64
Legendary
Offline
Activity: 1876
Merit: 1000
|
|
October 13, 2016, 11:43:44 AM |
|
@ claymore. still looking for version that does not test the xmr address upon start, any update? note: still the most stable miner i have had since btc: all rigs very stable, this rig is two 290x's 6-07:35:29 - SHARE FOUND (target 150000) - (GPU 1 of 2) 6-07:35:37 - SHARE FOUND (target 150000) - (GPU 0 of 2) 6-07:35:49 - New job received from monerohash.com:3333 1380 h/s, TotalHashes: 5261846K, DevHashes: 131545K Mining time: 1079:49
this one is 3 7970's DevFee: 10/13/16-07:35:22 - SHARE FOUND (target 5291) - (GPU 2 of 3) 10/13/16-07:36:20 - New job received from monerohash.com:3333 Speed: 1438 h/s, TotalHashes: 5483912K, DevHashes: 137097K Mining time: 1079:50
Anyone else have more then 1080 hours?? JIm
|
1jimbitm6hAKTjKX4qurCNQubbnk2YsFw
|
|
|
Yupp82
Newbie
Offline
Activity: 10
Merit: 0
|
|
October 14, 2016, 12:31:11 AM |
|
Hello to All!
First: Claymore Thanks for Miner is Great! Work great on my Rig1, Rig2 is a problem I have 4x MSI R9 280x, mobo msi 890fxa-gd70, Sempron 140, 8 GB RAM, psu 1200 Corsair.
My .bat: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_SINGLE_ALLOC_PERCENT =100
EthDcrMiner64.exe -epool eth.coinmine.pl:4000 -ewal xxxx.xxxx -esm 2 -epsw password -allpools 1 -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal xxxx.xxxx -dpsw password
I got this from LoG file: 1) ETH: 1 pool is specified 00:59:42:936 f04 Main Ethereum pool is eth.coinmine.pl:4000 00:59:42:936 f04 DCR: 1 pool is specified 00:59:42:936 f04 Main Decred pool is dcr.coinmine.pl:2222 00:59:43:669 f04 OpenCL platform: AMD Accelerated Parallel Processing 00:59:43:684 f04 OpenCL initializing...
00:59:43:684 f04 AMD Cards available: 2 00:59:43:684 f04 GPU #0: Tahiti, 512 MB available, 32 compute units - !!!!!why only this? !!!! 00:59:43:684 f04 GPU #1: Tahiti, 512 MB available, 32 compute units 00:59:43:684 f04 POOL/SOLO version
2) 00:59:56:352 f70 eth: job changed 00:59:56:352 f70 new buf size: 0 00:59:56:352 f70 ETH: 10/14/16-00:59:56 - New job from eth.coinmine.pl:4000 00:59:56:352 f70 target: 0x00000002dd01fc06 (diff: 1500MH), epoch #81 00:59:56:352 f70 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 - No speed? 00:59:56:352 f70 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s 00:59:56:352 f70 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 00:59:56:352 f70 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s 00:59:56:430 f78 got 524 bytes
Ok Try mining XMR ( I know that this topic is for ETH, but i dony want to repeat) I got this: 01:00:43:760 bf0 parse packet: 303 01:00:43:760 bf0 new buf size: 0 01:00:43:760 6b4 DevFee: Pool Diff 50000.2 01:00:43:760 bf0 Pool Diff 18000 01:00:43:760 bf0 df has same pool, skip 01:00:43:838 a4c Round 01:00:43:838 670 Round 01:00:43:838 a68 Round 01:00:43:854 bac Round 01:00:44:852 a4c GPU 0: HashCnt = 32, time = 997 ms, hashrate = 32 h/s 01:00:44:852 a4c Round 01:00:44:899 a68 GPU 1: HashCnt = 32, time = 1032 ms, hashrate = 31 h/s 01:00:44:899 a68 Round 01:00:45:819 670 GPU 0: HashCnt = 32, time = 946 ms, hashrate = 33 h/s 01:00:45:819 670 Round 01:00:45:866 bac GPU 1: HashCnt = 32, time = 946 ms, hashrate = 33 h/s - it is slow i think?
Thanks for help. J. 01:00:45:866 bac Roun
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
October 14, 2016, 01:38:16 PM |
|
Hello to All!
First: Claymore Thanks for Miner is Great! Work great on my Rig1, Rig2 is a problem I have 4x MSI R9 280x, mobo msi 890fxa-gd70, Sempron 140, 8 GB RAM, psu 1200 Corsair.
My .bat: setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_SINGLE_ALLOC_PERCENT =100
EthDcrMiner64.exe -epool eth.coinmine.pl:4000 -ewal xxxx.xxxx -esm 2 -epsw password -allpools 1 -dpool stratum+tcp://dcr.coinmine.pl:2222 -dwal xxxx.xxxx -dpsw password
I got this from LoG file: 1) ETH: 1 pool is specified 00:59:42:936 f04 Main Ethereum pool is eth.coinmine.pl:4000 00:59:42:936 f04 DCR: 1 pool is specified 00:59:42:936 f04 Main Decred pool is dcr.coinmine.pl:2222 00:59:43:669 f04 OpenCL platform: AMD Accelerated Parallel Processing 00:59:43:684 f04 OpenCL initializing...
00:59:43:684 f04 AMD Cards available: 2 00:59:43:684 f04 GPU #0: Tahiti, 512 MB available, 32 compute units - !!!!!why only this? !!!! 00:59:43:684 f04 GPU #1: Tahiti, 512 MB available, 32 compute units 00:59:43:684 f04 POOL/SOLO version
2) 00:59:56:352 f70 eth: job changed 00:59:56:352 f70 new buf size: 0 00:59:56:352 f70 ETH: 10/14/16-00:59:56 - New job from eth.coinmine.pl:4000 00:59:56:352 f70 target: 0x00000002dd01fc06 (diff: 1500MH), epoch #81 00:59:56:352 f70 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 - No speed? 00:59:56:352 f70 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s 00:59:56:352 f70 DCR - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0 00:59:56:352 f70 DCR: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s 00:59:56:430 f78 got 524 bytes
Ok Try mining XMR ( I know that this topic is for ETH, but i dony want to repeat) I got this: 01:00:43:760 bf0 parse packet: 303 01:00:43:760 bf0 new buf size: 0 01:00:43:760 6b4 DevFee: Pool Diff 50000.2 01:00:43:760 bf0 Pool Diff 18000 01:00:43:760 bf0 df has same pool, skip 01:00:43:838 a4c Round 01:00:43:838 670 Round 01:00:43:838 a68 Round 01:00:43:854 bac Round 01:00:44:852 a4c GPU 0: HashCnt = 32, time = 997 ms, hashrate = 32 h/s 01:00:44:852 a4c Round 01:00:44:899 a68 GPU 1: HashCnt = 32, time = 1032 ms, hashrate = 31 h/s 01:00:44:899 a68 Round 01:00:45:819 670 GPU 0: HashCnt = 32, time = 946 ms, hashrate = 33 h/s 01:00:45:819 670 Round 01:00:45:866 bac GPU 1: HashCnt = 32, time = 946 ms, hashrate = 33 h/s - it is slow i think?
Thanks for help. J. 01:00:45:866 bac Roun
I think you mistakenly posted this in Claymore's Cryptonote thread.... you may want to post CDM questions at https://bitcointalk.org/index.php?topic=1433925.msg14501372#msg14501372
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
zoeid
Newbie
Offline
Activity: 8
Merit: 0
|
|
October 18, 2016, 09:23:00 PM |
|
helllo , i think im getting very bad score .. what is happening ? 290X - hynix - 1150 / 1400 780h/s XMR even at stock same score or so . you claim that hynix memory get 810 score :/ https://i.imgur.com/TwBaXqn.png
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
October 19, 2016, 09:16:38 AM |
|
helllo , i think im getting very bad score .. what is happening ?
290X - hynix - 1150 / 1400 780h/s XMR
even at stock same score or so .
you claim that hynix memory get 810 score :/
Yes I get 810h/s on 290x hynix in Windows 7 and Catalyst 15.12.
|
|
|
|
YV1074
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 19, 2016, 12:15:50 PM |
|
I get this error a lot, any ideas on how to fix it?
08:02:46:259 1b2c GPU 0: HashCnt = 864, time = 1635 ms, hashrate = 528 h/s 08:02:46:259 1b2c Round 08:02:47:041 ec4 10/19/16-08:02:42 - SHARE FOUND (target 4862) - (GPU 0 of 1) 08:02:47:244 ec4 got 63 bytes 08:02:47:244 ec4 buf: {"jsonrpc":"2.0","result":{"status":"OK"},"id":1,"error":null}
08:02:47:244 ec4 parse packet: 63 08:02:47:244 ec4 Share accepted 08:02:47:244 ec4 new buf size: 0 08:02:47:931 1ef4 GPU 0: HashCnt = 864, time = 1642 ms, hashrate = 526 h/s
Gigabyte R9 390 i7 4790K 16 Gbyte of ram Windows 10 pro Crimson 16.9.2 driver
Getting 509 H/s now with Claymore, another 150 H/s from the CPU via Minergate, is this all I can get out of it? How can I fix the error stated above?
I'm new at this but trying hard to learn
Thanks
|
|
|
|
P0nT0...
Newbie
Offline
Activity: 1
Merit: 0
|
|
October 19, 2016, 05:31:53 PM |
|
someone may indicate an ideal hascount for the RX 470 8gb. (I'm using a Shapire RX 470 8gb Nitro)?
|
|
|
|
r3lentleSs
|
|
October 21, 2016, 02:58:35 PM |
|
Close to 780h/s! I'm getting this errors alot on both CPU & GPU. No new jobs were received for 20 mins - something wrong with this pool, disconnect. Stratum - socket send failed 10053, disconnect
|
|
|
|
Server2850Guy
Newbie
Offline
Activity: 19
Merit: 0
|
|
October 22, 2016, 09:29:11 AM |
|
Could we get a updated Linux version? XMR has gone up, and some of us would like to switch our farms to XMR at the moment. Ideally a 15.12 version?
(I think you said to use max 14.7 but here's my report anyways for 15.x); The 9.1 version has issues with some GPUs, i have my 290/390, my 380 and some random 280x get lowdifficultyshare errors for 100% of their hash. I tried the -a 3 option, it doesnt fix it.
Cheers.
Same here, at least for some rigs of three people, willing to start mining XMR, with Linux and...cuda, so Nvidea, thinking GTX1080..
|
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
October 22, 2016, 10:24:26 PM |
|
hello i m testing the miner but i getting error, and disconnected ?
i tried on 2 pool
C:\cgminer_skein\Claymore CryptoNote>"C:\cgminer_skein\Claymore CryptoNote\NsGpu CNMiner.exe" -o stratum+tcp://xci.acidminer.org:3003 -u 1G8X27mhjoqASRkK2pELYCVf twqXYjRJo7LDCdoWgsD96otte77vbfBSVpuwcpDERyM2pPbt8BixxDQ4siw1bXzX4T13L5y -p x Main pool is xci.acidminer.org
╔════════════════════════════════════════════════════════════════╗ ║ Claymore CryptoNote GPU Miner v9.6 Beta ║ ╚════════════════════════════════════════════════════════════════╝
Cards available: 1 GPU #0: name: Ellesmere, 4096 MB available, 32 units Total cards: 1
Catalyst 15.x is REQUIRED for best performance and compatibility At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Initializing...
GPU #0: HashCnt = 1024 POOL version GPU #0: -a 1 mode selected 1 pool specified. Remote monitoring is enabled on port 3333 Press "m" key for tune mode. Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003 Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003 Stratum - Connected Stratum - Connected Error in server response : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog in"}} Pool Diff 10000 10/23/16-00:14:09 - New job received from xci.acidminer.org:3003 Speed: 261 h/s, TotalHashes: 1K, DevHashes: 0K Mining time: 00:00 10/23/16-00:14:23 - SHARE FOUND (target 10000) - (GPU 0 of 1) 10/23/16-00:14:25 - SHARE FOUND (target 10000) - (GPU 0 of 1) 10/23/16-00:14:29 - New job received from xci.acidminer.org:3003 Speed: 565 h/s, TotalHashes: 13K, DevHashes: 0K Mining time: 00:00 Job timeout, disconnect, retry in 20 sec... 10/23/16-00:14:38 - SHARE FOUND (target 20000) - (GPU 0 of 1) 10/23/16-00:14:42 - New job received from xci.acidminer.org:3003 Speed: 550 h/s, TotalHashes: 19K, DevHashes: 0K Mining time: 00:00 Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003 Stratum - Connected Error in server response : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog in"}} 10/23/16-00:14:59 - New job received from xci.acidminer.org:3003 Speed: 570 h/s, TotalHashes: 30K, DevHashes: 0K Mining time: 00:00 10/23/16-00:15:22 - New job received from xci.acidminer.org:3003 Speed: 569 h/s, TotalHashes: 43K, DevHashes: 0K Mining time: 00:01 Job timeout, disconnect, retry in 20 sec... 10/23/16-00:15:39 - New job received from xci.acidminer.org:3003 Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003 Speed: 569 h/s, TotalHashes: 55K, DevHashes: 0K Mining time: 00:01 Stratum - Connected Error in server response : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog in"}} Job timeout, disconnect, retry in 20 sec... Stratum - connecting to 'xci.acidminer.org' <84.39.97.125> port 3003 Stratum - Connected Error in server response : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog in"}} 10/23/16-00:16:59 - New job received from xci.acidminer.org:3003 Speed: 573 h/s, TotalHashes: 97K, DevHashes: 0K Mining time: 00:02 Job timeout, disconnect, retry in 20 sec...
*****************
C:\cgminer_skein\Claymore CryptoNote>setx GPU_MAX_ALLOC_PERCENT 100
RÉUSSITE : la valeur spécifiée a été enregistrée.
C:\cgminer_skein\Claymore CryptoNote>"C:\cgminer_skein\Claymore CryptoNote\NsGpu CNMiner.exe" -o stratum+tcp://gorillapool.org:7777 -u 1G8X27mhjoqASRkK2pELYCVftw qXYjRJo7LDCdoWgsD96otte77vbfBSVpuwcpDERyM2pPbt8BixxDQ4siw1bXzX4T13L5y -p x Main pool is gorillapool.org
╔════════════════════════════════════════════════════════════════╗ ║ Claymore CryptoNote GPU Miner v9.6 Beta ║ ╚════════════════════════════════════════════════════════════════╝
Cards available: 1 GPU #0: name: Ellesmere, 4096 MB available, 32 units Total cards: 1
Catalyst 15.x is REQUIRED for best performance and compatibility At least 16 GB of Virtual Memory is required for multi-GPU systems Make sure you defined GPU_MAX_ALLOC_PERCENT 100 Be careful with overclocking, use default clocks for first tests Initializing...
GPU #0: HashCnt = 1024 POOL version GPU #0: -a 1 mode selected 1 pool specified. Remote monitoring is enabled on port 3333 Press "m" key for tune mode. Stratum - connecting to 'gorillapool.org' <146.185.145.175> port 7777 Stratum - connecting to 'gorillapool.org' <146.185.145.175> port 7777 Stratum - Connected Stratum - Connected Error in server response : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog in"}} Pool Diff 25000.1 10/23/16-00:20:46 - SHARE FOUND (target 25000) - (GPU 0 of 1) Job timeout, disconnect, retry in 20 sec... 10/23/16-00:21:11 - SHARE FOUND (target 25000) - (GPU 0 of 1) 10/23/16-00:21:15 - New job received from gorillapool.org:7777 Speed: 564 h/s, TotalHashes: 20K, DevHashes: 0K Mining time: 00:00 10/23/16-00:21:25 - New job received from gorillapool.org:7777 Speed: 555 h/s, TotalHashes: 25K, DevHashes: 0K Mining time: 00:00 Stratum - connecting to 'gorillapool.org' <146.185.145.175> port 7777 Stratum - Connected Error in server response : {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"invalidaddressusedforlog in"}}
|
|
|
|
XMR-Miner
Newbie
Offline
Activity: 12
Merit: 0
|
|
October 26, 2016, 01:51:15 PM Last edit: October 27, 2016, 04:38:44 AM by XMR-Miner |
|
...willing to start mining XMR, with Linux and...cuda, so Nvidea, thinking GTX1080.
Tested GTX 1080 Founders Ed. with everything overclocked (with MSI Afterburner) to maximum possible without errors and it tops out at 451 h/s with average ~425 h/s (with ccminer); 'also elevate priority of miner task to ABOVENORMAL to mitigate intermittent slowing from Windows system background tasks that run at NORMAL priority, such as the TiWorker update task. 'anxiously await Linux Claymore so we can run eight AMD GPUs instead of the Windows max. of six.
|
|
|
|
EvilC0P
Newbie
Offline
Activity: 50
Merit: 0
|
|
October 27, 2016, 01:17:57 PM |
|
...willing to start mining XMR, with Linux and...cuda, so Nvidea, thinking GTX1080.
Tested GTX 1080 Founders Ed. with everything overclocked (with MSI Afterburner) to maximum possible without errors and it tops out at 451 h/s with average ~425 h/s (with ccminer); 'also elevate priority of miner task to ABOVENORMAL to mitigate intermittent slowing from Windows system background tasks that run at NORMAL priority, such as the TiWorker update task. 'anxiously await Linux Claymore so we can run eight AMD GPUs instead of the Windows max. of six. Which motherboard and CPU will you use for 8 cards? i know for 7 but didn't find any possibilities for 8+
|
|
|
|
|
EvilC0P
Newbie
Offline
Activity: 50
Merit: 0
|
|
October 28, 2016, 01:26:47 PM |
|
very nice! i love that 4-5U expansion case! but 3600+ $ US is so expensive. a motherboard I got but wasn't aware of a detail which makes my solution not viable for now, is the msi krait gaming 3x z170a board. it's got 3 x16/x8 slots with 4 x1. the problem at the moment are the skylake cpus, they only have 16 pcie lanes. so hopefully intel releases better skylake processor. All that to say only 4 RX 480 works on my current board, when i add a 5th i get an error message stating there isn't enough free resources code 12. otherwise i would suggest the Asus X99-E WS/USB 3.1 , it's got 7 x16/x8 slots. I'm looking at this one, because i got some Xeon processors at home. and i use pcie risers with usb3 cables
|
|
|
|
Watjila
Newbie
Offline
Activity: 58
Merit: 0
|
|
October 28, 2016, 04:19:29 PM |
|
very nice! i love that 4-5U expansion case! but 3600+ $ US is so expensive. a motherboard I got but wasn't aware of a detail which makes my solution not viable for now, is the msi krait gaming 3x z170a board. it's got 3 x16/x8 slots with 4 x1. the problem at the moment are the skylake cpus, they only have 16 pcie lanes. so hopefully intel releases better skylake processor. All that to say only 4 RX 480 works on my current board, when i add a 5th i get an error message stating there isn't enough free resources code 12. otherwise i would suggest the Asus X99-E WS/USB 3.1 , it's got 7 x16/x8 slots. I'm looking at this one, because i got some Xeon processors at home. and i use pcie risers with usb3 cables The 7 PCIE slot motherboard are the high end ones. They are much more expensive. Not worth the mining.
|
|
|
|
citronick
Legendary
Offline
Activity: 1834
Merit: 1080
---- winter*juvia -----
|
|
October 29, 2016, 12:57:25 AM |
|
very nice! i love that 4-5U expansion case! but 3600+ $ US is so expensive. a motherboard I got but wasn't aware of a detail which makes my solution not viable for now, is the msi krait gaming 3x z170a board. it's got 3 x16/x8 slots with 4 x1. the problem at the moment are the skylake cpus, they only have 16 pcie lanes. so hopefully intel releases better skylake processor. All that to say only 4 RX 480 works on my current board, when i add a 5th i get an error message stating there isn't enough free resources code 12. otherwise i would suggest the Asus X99-E WS/USB 3.1 , it's got 7 x16/x8 slots. I'm looking at this one, because i got some Xeon processors at home. and i use pcie risers with usb3 cables The 7 PCIE slot motherboard are the high end ones. They are much more expensive. Not worth the mining. I have one rig that has 7 x R7-370s, using standard H81 BTC Pro mobo and 3-to-1 PCI multi-plex card. It started as an experiment but I ended up keeping it as a one of my test systems for EthOS and also Claymore. R7-370 runs only about 14.5Mhs per card and its not a fast card, however its very cool and not power hungry. So this is good card for this rig. In order to use higher end cards for 7/8 GPU rig, prepare to tinker on multi PSU setups. In conclusion, I will never do multi GPU rig like this again because, it requires expensive 1600w PSU, larger than usual open cage rig, plenty of USB risers and many hours of tickering, only Linux/Ubuntu can drive more than 8 x GPUs - higher learning curve because you need to install AMD drivers separately in Ubuntu 16.04, for Windows... I think limited to 7-8 or more GPUs and requires special hacks. To consider a 8 or more x PCI slot mobo and PCI expansion sub-board; similar to deep learning multi GPU computers... for mining, its not worth it - it will be too expensive.
|
If I provided you good and useful info or just a smile to your day, consider sending me merit points to further validate this Bitcointalk account ~ useful for future account recovery...
|
|
|
|