Claymore's CryptoNote AMD GPU Miner v11.3

[H0RV4T]

Is there some pool that shows rig names?

Iam on dwarf, and cant get my rigs name show up there... tryed "1" "rig1" nothing...

How did you set your wallet/pid/worker in start.bat?

This is an example: WALLET-ADDRESS.PERSONAL-PAYMENT-ID.WORKER-NAME

It is ok i think, but nothing showing

Code:

NsGpuCNMiner.exe -o stratum+tcp://xmr-eu.dwarfpool.com:8050 -u MyMoneroAdress.1 -p x

[1714800760]

1714800760

[1714800760]

1714800760

[1714800760]

1714800760

[1714800760]

1714800760

[GabryRox]

I am having a issue with monero mining on claymore where I get "Lowdifficultyshare" I have set my -a and my -h but still get the error and I have switched pools and drivers and claymore versions and still nothing. I am mining with one 7970 and one 7950.

I was getting the same errors right after switching over from mining ETH with Core/Clock speeds set at 1150/1950 (strap-1500 modded 470s).  After seeing this, I went it and changed from 1150 to 1200 and have not seen that LowDiffShare error since... over 24 hours ago.  Of course, upping to 1200 sucks more wattage but also gives a bit more hashes and no errors... and still my 6-card rig is at 830 watts, but 2 of the GPUs are not strap modded yet so after that and a bit of tweaking, pretty sure I can get it back in the mid 700's wattage wise.  So, bottom line... try upping your core speed a bit and that should get rid of that error.

[Masked_Immortal]

What is the hashrate for r9 390 and 390x should i move to xmr from zec ? I'm concerned about diff. Thx

i just tested on 390x out of the box stock settings gives me ~830h running stable for over 3h now
altho evry rig with rx470 or 480 hangs whole rig between 10-60min of running on stock settings also, any tips anyone?

same here my 470 & 480 rigs are unstable for monero, i tried to reduce memory clock and increase voltage but no change,
they are all have modded bios for eth

[ffthomas]

what hashrate for R9 480 ?

im getting 630 and i think something should be tweaked

mining XMR

im getting 700h on rx480 8gb - only mem straps copied, stock clocks, switched straight from zcash

where can i find the mem straps?

in the card's bios.. you can edit bios using PolarisBiosEditor and you can flash bios using ATIFlash.

never forget to make backup before do any changes.

[Ursul0]

What is the hashrate for r9 390 and 390x should i move to xmr from zec ? I'm concerned about diff. Thx

i just tested on 390x out of the box stock settings gives me ~830h running stable for over 3h now
altho evry rig with rx470 or 480 hangs whole rig between 10-60min of running on stock settings also, any tips anyone?

same here my 470 & 480 rigs are unstable for monero, i tried to reduce memory clock and increase voltage but no change,
they are all have modded bios for eth

hmmm... I have several rigs of rx400 modded bios, stable on XMR. same setup as ETH (1080MHz core and about 2000MHz mem), occasionally a tiny bit more voltage, still heavy UV

[ocminer]

Please allow workernames as username, not only wallet addresses

bumping this once more

[Claymore]

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

[citronick]

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

Thanks Claymore -- glad that you will work on this.

While non-RX cards was doing great on v9.6, unfortunately very unstable for RX cards.

I had to temporarily use latest sgminer-gm v5.5.4 (ETH/ZEC/XMR miner) for my XMR mining rigs but lose all the Ethman features.

[Hotmetal]

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

Thank you!

[yuslav]

Ok I will release new version in 2-4 days, I will update many things.

We hope that the main focus is the optimization of a 16. *. * Driver. And according to a series of maps RX.

[Prelude]

Glad to hear you're working on an update, claymore! Any chance you can add auto detect in ethman so it knows what client we're running? You could have 3 speed ratings available in the rig properties, ETH/ZEC/XMR so the manager keeps up when we switch algorithms.

While non-RX cards was doing great on v9.6, unfortunately very unstable for RX cards.

I've got a few RX 480/470 rigs running perfectly on 9.6, think it might be something to do with your setup. Here's an example of a 6 GPU rig running for almost 3 days straight:



Rig is running W10 4GB RAM 16.11.4 with 4x 480 and 2x 470, all have modded timings.

[elgi76]

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

and can you make a http connection for monitoring and use your software with multipoolminer on miningpoolhub.

thank

[citronick]

Glad to hear you're working on an update, claymore! Any chance you can add auto detect in ethman so it knows what client we're running? You could have 3 speed ratings available in the rig properties, ETH/ZEC/XMR so the manager keeps up when we switch algorithms.

While non-RX cards was doing great on v9.6, unfortunately very unstable for RX cards.

I've got a few RX 480/470 rigs running perfectly on 9.6, think it might be something to do with your setup. Here's an example of a 6 GPU rig running for almost 3 days straight:



Rig is running W10 4GB RAM 16.11.4 with 4x 480 and 2x 470, all have modded timings.

Yes, its due to the Crimson drivers.
I have to upgrade the drivers to 16.11.x to get it stable with v9.6 -- it will be a lot of work and downtime.
Hope v9.7 will work better with my existing drivers.

[rawbert]

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

Please don't forget fixing temps/fans to show in remote manager for RX470/480 cards.

[Prelude]

Glad to hear you're working on an update, claymore! Any chance you can add auto detect in ethman so it knows what client we're running? You could have 3 speed ratings available in the rig properties, ETH/ZEC/XMR so the manager keeps up when we switch algorithms.

While non-RX cards was doing great on v9.6, unfortunately very unstable for RX cards.

I've got a few RX 480/470 rigs running perfectly on 9.6, think it might be something to do with your setup. Here's an example of a 6 GPU rig running for almost 3 days straight:



Rig is running W10 4GB RAM 16.11.4 with 4x 480 and 2x 470, all have modded timings.

Yes, its due to the Crimson drivers.
I have to upgrade the drivers to 16.11.x to get it stable with v9.6 -- it will be a lot of work and downtime.
Hope v9.7 will work better with my existing drivers.

I believe you can copy the appropriate files from newer drivers into the miner's folder, and the miner will use those instead of the currently installed driver's version. That would allow you to keep your old drivers and get the benefits of the newer ones. Maybe claymore can comment.

But come to think of it, your drivers can't be any older than June. I have a rig running with the RX release drivers and it's just as stable as my 16.11.4 rig that I posted. Drivers may not be your issue.

[Server2850Guy]

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

Claymore, don't you see a possibility to make a cuda 8 version for Linux for pascal cards, and maybe apart version, for older cards ?

[caloydgreat]

whats the min. payout from dwarfpool, if using exchange address? Is it 5.0 or 0.2 xmr? Website is confusing. 5 xmr would need at least 40 480's

[m1n1ngP4d4w4n]

whats the min. payout from dwarfpool, if using exchange address? Is it 5.0 or 0.2 xmr? Website is confusing. 5 xmr would need at least 40 480's

Well i think that's pretty clear

"If you mine direct to an exchange, then payment will be from 5 XMR once an hour or once every day"

So if you have a very very powerfull mining farm, they will pay you 5+ XMR per hour.

If you are a normal miner and generate less than 5 XMR/day , you will be paid your mined XMR once a day.

to sums up

+5XMR/day = payout every hour as long as you have 5XMR or more unpaid.
-5XMR/day = payout every day.

[newmz]

Like I said in an earlier post - I worry about the upgrading of this miner because of all the possible RX cards it will potentially add to the XMR network - making the difficulty skyrocket just like it did when they all appeared on the ETH network, but I guess it's inevitable and Claymore wants/needs his dev fees - he doesn't have to worry about difficulty, he just wants as many miners using his software as possible.

Anyway - I'm hopeful the upgrade will add features and improvements for those of us who have been using this already for a while on R9, R7 and even earlier cards.

Does anyone have any tips or suggestions for the -a and -h settings for R9 380 (4GB) cards with this software. Right now I have them at -a 4 and the default -h and they hash at about 550h/s. I have them core underclocked to 800 (just because it always made no difference when I mined ETH and saves wattage).

Does XMR respond to memory over/underclocking much? It doesn't seem to matter if I have my 290s at 1125, 1250 or 1375. Or my 380s at 1425 or 1500.

[wulfgar_1979]

Please allow workernames as username, not only wallet addresses

bumping this once more

Ok I will release new version in 2-4 days, I will update many things.

Thank you Claymore!