Claymore's CryptoNote AMD GPU Miner v11.3

[doktor83]

take back from mem overclock

[Ursul0]

take back from mem overclock

There's no mem overclock and the error itself is not the issue.
The issue is disconnect/reconnect and it's not obvious to me that it should be on the pool side
Anyway I'm fine-tuning now and as each card is different may have some issues occasionally, but sometimes a single error can lead to a job timeout on dwarf and unsuccessful reconnect attempts for several minutes...

[BeneQ]

fyi:
https://s24.postimg.org/i4f6i93it/clay96_lowdiff.png

maybe fixed in the next version?

EDIT: also there's really weird behavior of the temps/fan speed display in EthMan - if I don't set -cclock to some value (not 0 for a single card is enough), there's no temp/fan data coming.  probably has something to so with system path to amd drivers...

I had  the same problem today on  two of  four  rigs  :/   I have had to  switch that rigs for  Dwarfpool  ZEC   :/

[pehoko]

Why all uses this freak dwarfpool as was mentioned that this pool makes something wrong???

[cryptonitro]

polaris get fans bug , they run at max without reason , if you are on old driver , i mean like 16.9.2 , get 16.11.5 it get better stability and no fans bug !
lowdifficultyshare ? dont use option

Code:

 -li 

 

i m with rx480 nitro+ 8go ... with 16.11.5 driver (1150c / 2150m) low power and miner runs for more of 30 hours now (win7)

[tkredmond]

hope that helps

i use xfx rx 470 and had numerous crashes with this version of Claymore,  BUT after upgrading to 6.14 all Radeon cards seem to be working fine. For the last 8 hours at least.

I don't get more than 570s but at least system seems to be stable

[HashZilla]

Well, after initial good results on both my rigs with 9.6, I now have problems with both.  Woke up this morning to rig #2 (6x RX 470s) crashed and all fans blasting. This happened the night before with core/clock settings of 1200/1950, so I had lowered it to 1200/1920.  It ran all day fine then just a few minutes ago, I check it and I had the same "Open CL hung in thread 10 & 11" issue that had occurred the night before.  Now I have it set at default 1242/1900, so we will see how that goes.

On Rig #1 that had been running 4x rx 470s for over 4 days straight at 1242/1900, it just experienced that sporadic fan blasting issue that others have encountered. So, I had to reboot and reset that one as well.

Bottom line, there definitely appear to be stability issues with the 4xx series cards, so hopefully this is something that can be addressed in the forthcoming v10. 

I know this belongs on the CPU thread but I have also seen weird things going on with Claymore CPU XMR Miner 3.5.  I have 3 K series i7's mining it and on 2 of my 3 PCs, the hash-rate has inexplicably dropped by about 10-15%.  This is after restarting and rebooting several times and there is nothing else running CPU wise, yet for some reason it's not as effective.

Really looking forward to the GPU miner update. Thanks in advance Claymore!

So... both rigs ran fine overnight with the 1242/1900 settings, but then this morning, rig #2 crashes and reboots again. Same settings, same cards, generally same setup, but rig 2 is just unstable. Got it running again but now I am getting sporadic "low difficulty shares".  Does anyone know what the main causes of these are?  Also, what problems do they cause?  I've heard of people getting banned from dwarf for too many of these so I don't want that to happen, but don't know what to do to fix it either. Right now at least it I've only seen 2 in about 25 minutes of running but not sure what "too many" is either.

I have good luck with 1200/1900=695hs on three rigs.  I would suggest looking at the log file to see if one or more gpu is taking to long for a solution like more than 1750ms.

[ADeltaX]

Why I'm getting only 550 H/s (mining XMR) on RX 480?
I tried every driver, but no luck :\

[cscheat]

anybody successfully mine directly to exchange? (poloniex) ??

please advice

[maxmad_x]

anybody successfully mine directly to exchange? (poloniex) ??

please advice

in place of username use poloniex_walletid.poloniex_paymentID.rignumber
it has to be in this format xxxxxxxxxxxxxxxxxx.yyyyyyyyyyyyyyyy.1

[maxmad_x]

Why I'm getting only 550 H/s (mining XMR) on RX 480?
I tried every driver, but no luck :\

Overclock .. I use 1250core and 2100 memory. Goes beyond 720h/s

[maxmad_x]

hope that helps

i use xfx rx 470 and had numerous crashes with this version of Claymore,  BUT after upgrading to 6.14 all Radeon cards seem to be working fine. For the last 8 hours at least.

I don't get more than 570s but at least system seems to be stable

what is 6.14???

[jelin1984]

any good and stable monero pool??

[Trimegistus]

hope that helps

i use xfx rx 470 and had numerous crashes with this version of Claymore,  BUT after upgrading to 6.14 all Radeon cards seem to be working fine. For the last 8 hours at least.

I don't get more than 570s but at least system seems to be stable

what is 6.14???

I believe he was referring to AMD's drivers 16.11.4

http://support.amd.com/en-us/download/desktop/previous/detail?os=Windows%2010%20-%2064&rev=16.11.4

[Ursul0]

polaris get fans bug , they run at max without reason , if you are on old driver , i mean like 16.9.2 , get 16.11.5 it get better stability and no fans bug !
lowdifficultyshare ? dont use option

Code:

 -li 

 

i m with rx480 nitro+ 8go ... with 16.11.5 driver (1150c / 2150m) low power and miner runs for more of 30 hours now (win7)

Driver no matter for me. I like 16.9.2.
Never have 100% fan following these rules:
1) no full driver install (unzip the driver exe to folder, DDU, point to drv dir in device manager)
2) no afterburner - watttool with profiles instead
3) no miners builtin fan control

[forzendiablo]

how to get 730+ on 480x Nitro+ ?

[jelin1984]

any good and stable pool??

[Trimegistus]

any good and stable pool??

I've been using dwarf with no problems

[rawbert]

any good and stable pool??

https://monero.hunpool.eu

0% fee!!

[Hurtman]

6 Asus Strix RX 480 8 Gb - 730 h/s Claymore v 9.6 (All System 730 Watts)
1114/1950 (1500 timings)