Claymore's CryptoNote AMD GPU Miner v11.3

[nonmetallicoxide]

rx480 8gb card  claymore 9.7 stable working
With 10.2, the miner restarts continuously

I want to switch to 10.2 for lowdifficultyshare error at 9.7

Don't get me wrong, Claymore produces some great miners and has superb support, but sgminer-gm-5.5.5 runs faster, draws less power and has no fee.
https://github.com/genesismining/sgminer-gm/releases

I'm getting 2.7 khs with claymore but 2.3 with sgminer, how is the latter faster?

[antantti]

I tried Dwarfpool but found a pool that lets you withdraw coin at, virtually, any limit unlike Dwarfpool which has quite a high limit for a small miner.
The pool I use is Mining Pool Hub, http://miningpoolhub.com/

"0.05-5000000 XMR. Set to '0' for no auto payout. A 0.015 XMR TX fee will apply"

[Call_Me_Bambi]

I tried Dwarfpool but found a pool that lets you withdraw coin at, virtually, any limit unlike Dwarfpool which has quite a high limit for a small miner.
The pool I use is Mining Pool Hub, http://miningpoolhub.com/

"0.05-5000000 XMR. Set to '0' for no auto payout. A 0.015 XMR TX fee will apply"

Dwarfpool (For Monero):         Pool Fee, 1.5%. Withdrawal Transaction Fee, 0.008 XMR (0.014 to Exchange). Minimum Withdrawal Limit, 0.1 XMR.
Mining Pool Hub (For Monero): Pool Fee, 0.9%. Withdrawal Transaction Fee, 0.015 XMR. Minimum Withdrawal Limit, 0.05 XMR.

I thought Dwarfpool was at 0.5 XMR minimum withdraw limit, some pools are - maybe they lowered it.
Mining Pool Hub has a significantly lower pool fee which more than offsets the higher transaction fee.

[antantti]

Mining Pool Hub has a significantly lower pool fee which more than offsets the higher transaction fee.

??

0.015/0.05 = 30%

[garytheasshole]

I tried Dwarfpool but found a pool that lets you withdraw coin at, virtually, any limit unlike Dwarfpool which has quite a high limit for a small miner.
The pool I use is Mining Pool Hub, http://miningpoolhub.com/

"0.05-5000000 XMR. Set to '0' for no auto payout. A 0.015 XMR TX fee will apply"

Dwarfpool (For Monero):         Pool Fee, 1.5%. Withdrawal Transaction Fee, 0.008 XMR (0.014 to Exchange). Minimum Withdrawal Limit, 0.1 XMR.
Mining Pool Hub (For Monero): Pool Fee, 0.9%. Withdrawal Transaction Fee, 0.015 XMR. Minimum Withdrawal Limit, 0.05 XMR.

I thought Dwarfpool was at 0.5 XMR minimum withdraw limit, some pools are - maybe they lowered it.
Mining Pool Hub has a significantly lower pool fee which more than offsets the higher transaction fee.

It's flat fee though, depends how many moneros you mine before you withdraw.

[valiant1]

Claymore, just want to give you major kudos for your work. You are a major player in the crypto game, and many people would not be able to mine without you. Keep it up!

[Danilo23]

my hash rates still drop over time. Does somebody else notice that? This is specifically on r8 300s.

[winterkid]

can i know AMD R9 290 4GB what the hashrate it can goes up to?

[Shiki Ryougi]

MSI RX580 gaming 8GB
Hashrate : 710-740
Core : 1250/1050
Memory : 2000/1000
Drivers : Blockchain beta
Power : ~100W

Is there any way to get higher hashrate?
how about using other miner? which one would you suggest?
And why would I getting lower hashrate when -h is higher than default?

[ingyenfrag]

my hash rates still drop over time. Does somebody else notice that? This is specifically on r8 300s.

I recognized that may hashrate drops when monitor goes to power save mode. When I set monitor power shutdown to never it holds the hashrate. Try this.

[alucard20724]

is it just me?... but since this cryptonight surge on nicehash, claymore's cryptonight 10.2 is not making a connection to nicehash.... at least for me.  All other algorythms appear to be working fine.

[Etherion]

Im not getting 10.2 to connect to hashparty.io or eupool.electroneum.com

echo off
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool ssl://electroneum.hashparty.io:3333 -xwal etnkEB99EFVKEJRsAoBRuA9qTmLaHeKY8Wc8nRRPJTv8KMUet9LsU4VFYBScUPe6fLB7Whh9BjjRNXR GCioioxnz746h1EU7Yt -xpsw x

Total cards: 2
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'electroneum.hashparty.io' <52.191.161.211> port 33
33 (SSL/TLS)
Cannot establish SSL/TLS connection
XMR: Stratum - Cannot connect to electroneum.hashparty.io:3333
XMR: Stratum - Failed to connect, retry in 20 sec...
XMR: Stratum - connecting to 'electroneum.hashparty.io' <52.191.161.211> port 33
33 (SSL/TLS)
Cannot establish SSL/TLS connection
XMR: Stratum - Cannot connect to electroneum.hashparty.io:3333
XMR: Stratum - Failed to connect, retry in 20 sec...

[notbatman]

is it just me?... but since this cryptonight surge on nicehash, claymore's cryptonight 10.2 is not making a connection to nicehash.... at least for me.  All other algorythms appear to be working fine.

The nicehash connection is scetchy as fuck, what coin are they mining? I prefer not to use them but I can't figure out where they're sending my hashing power to.

[notbatman]

MSI RX580 gaming 8GB
Hashrate : 710-740
Core : 1250/1050
Memory : 2000/1000
Drivers : Blockchain beta
Power : ~100W

Is there any way to get higher hashrate?
how about using other miner? which one would you suggest?
And why would I getting lower hashrate when -h is higher than default?

You should be getting at least 830 H/s @ 90W on that card. I'll make you a bios if you want, just PST.

[Etherion]

is it just me?... but since this cryptonight surge on nicehash, claymore's cryptonight 10.2 is not making a connection to nicehash.... at least for me.  All other algorythms appear to be working fine.

The nicehash connection is scetchy as fuck, what coin are they mining? I prefer not to use them but I can't figure out where they're sending my hashing power to.

read my thread

[Bakhtra]

Im not getting 10.2 to connect to hashparty.io or eupool.electroneum.com

echo off
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool ssl://electroneum.hashparty.io:3333 -xwal etnkEB99EFVKEJRsAoBRuA9qTmLaHeKY8Wc8nRRPJTv8KMUet9LsU4VFYBScUPe6fLB7Whh9BjjRNXR GCioioxnz746h1EU7Yt -xpsw x

Total cards: 2
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'electroneum.hashparty.io' <52.191.161.211> port 33
33 (SSL/TLS)
Cannot establish SSL/TLS connection
XMR: Stratum - Cannot connect to electroneum.hashparty.io:3333
XMR: Stratum - Failed to connect, retry in 20 sec...
XMR: Stratum - connecting to 'electroneum.hashparty.io' <52.191.161.211> port 33
33 (SSL/TLS)
Cannot establish SSL/TLS connection
XMR: Stratum - Cannot connect to electroneum.hashparty.io:3333
XMR: Stratum - Failed to connect, retry in 20 sec...

NsGpuCNMiner.exe -xpool stratum+tcp://electroneum.hashparty.io:3333

[notbatman]

is it just me?... but since this cryptonight surge on nicehash, claymore's cryptonight 10.2 is not making a connection to nicehash.... at least for me.  All other algorythms appear to be working fine.

The nicehash connection is scetchy as fuck, what coin are they mining? I prefer not to use them but I can't figure out where they're sending my hashing power to.

read my thread

Thanks!!!

[Etherion]

Im not getting 10.2 to connect to hashparty.io or eupool.electroneum.com

echo off
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool ssl://electroneum.hashparty.io:3333 -xwal etnkEB99EFVKEJRsAoBRuA9qTmLaHeKY8Wc8nRRPJTv8KMUet9LsU4VFYBScUPe6fLB7Whh9BjjRNXR GCioioxnz746h1EU7Yt -xpsw x

Total cards: 2
"-allpools" option is set, default pools can be used for devfee, check "Readme"
file for details.
Watchdog enabled
Remote management (READ-ONLY MODE) is enabled on port 3333

XMR: Stratum - connecting to 'electroneum.hashparty.io' <52.191.161.211> port 33
33 (SSL/TLS)
Cannot establish SSL/TLS connection
XMR: Stratum - Cannot connect to electroneum.hashparty.io:3333
XMR: Stratum - Failed to connect, retry in 20 sec...
XMR: Stratum - connecting to 'electroneum.hashparty.io' <52.191.161.211> port 33
33 (SSL/TLS)
Cannot establish SSL/TLS connection
XMR: Stratum - Cannot connect to electroneum.hashparty.io:3333
XMR: Stratum - Failed to connect, retry in 20 sec...

NsGpuCNMiner.exe -xpool stratum+tcp://electroneum.hashparty.io:3333

Thanks.

[henz46]

Can anyone help me to set sample usage parameter for nicehash pool?

[BSAlex]

Can anyone help me to set sample usage parameter for nicehash pool?

Just now using
POOL: stratum+ssl://cryptonight.eu.nicehash.com:33355, WALLET: YOURWALLET.YOURWORKER, PSW: x, ALLPOOLS: 0

I added it the first line of epool.txt
No pool parameters at start.bat !
Set your own YOURWALLET value and YOURWORKER value correctly!!!