Claymore's CryptoNote AMD GPU Miner v11.3

[biker]

i also experience gpu0 with 0 hashrate after few minutes of having like 600+ hash.

gpu 0 hangs in opencl call exit

then miner will restart again. only restarting pc will make the gpu0 mine again with 600+ hashrate and will repeat same error.

Try with -nofee 1, it's due to nicehash devfee mining, Hope it will be fixed soon...

After use -nofee 1, rig worked about 2 hours  with no Incorrect shares. But sudenly Killed and Clamores restarted itself.
I also use option -h 0. My clocks for Gigabyte 480 8GB Samsung are 1145/2000.

XMR: 12/11/17-22:20:41 - SHARE FOUND - (GPU 2)
Share accepted (74 ms)!
XMR: 12/11/17-22:20:44 - New job from etn.crypto-coins.club:21020 (FAILOVER 2)
XMR - Total Speed: 4966 H/s, Total Shares: 473, Rejected: 0, Time: 02:05
XMR: GPU0 831 H/s, GPU1 805 H/s, GPU2 833 H/s, GPU3 833 H/s, GPU4 831 H/s, GPU5 833 H/s
XMR:  Stale share found - skip
XMR:  Stale share found - skip
XMR: 12/11/17-22:20:48 - SHARE FOUND - (GPU 4)
XMR: 12/11/17-22:20:48 - SHARE FOUND - (GPU 5)
Share accepted (2 ms)!
Share accepted (39 ms)!
XMR: 12/11/17-22:20:49 - SHARE FOUND - (GPU 3)
XMR: 12/11/17-22:20:49 - SHARE FOUND - (GPU 3)
Share accepted (73 ms)!
Share accepted (109 ms)!
XMR: 12/11/17-22:20:54 - SHARE FOUND - (GPU 3)
Share accepted (79 ms)!
Killed

[jojoledemago]

@biker it's not the same problem, I recognized vexermeister's bug because I had the same one but it's not like yours. -nofee will probably not solve your problem. I never encountered this one but try to check in logs, you can also try -dbg 1 parameter to see more details in your log files.

[Johny101010]

This miner is not working well right now, especially for etn. I really hope claymore fixed it because it is a better performer than the other ones, but no stability even with -nofee.
I had it loose Hashrate on 1 card until rebooted and than show temp at 521 at another card.
It would be awesome if all people stopped using it to give claymore an incentive to fix it quickly.

[biker]

I had it loose Hashrate on 1 card until rebooted and than show temp at 521 at another card.
It would be awesome if all people stopped using it to give claymore an incentive to fix it quickly.

I also met such a temp once.

No have to stop, just we all set   -nofee 1 

[katala78]

Hi.Which driver is better to put?Claymore.CryptoNote 9.7 shows the no  temperature.card heated up to 70. -tt does not help.Now are driver Beta for Blockchain. Claymore.CryptoNote 10.2 with temperature all is normal and the high hash but is disabled and finds a smaller share

[wll1rah]

@Claymore

I have mostly older mid-range cards and my RX480 is garbage compared to them with cryptonote coins.  I do however need the ASM files added for for Bonaire, Cape Varde, and Oland though.  Since a few of my Cryptonote use AMD A-series processors the support or at least ability  to use the iGpu would be nice again.  The cards in your dual miner don't require the use the ASM bins, so why are you enforcing there use now with this miner.  You would be correct in that I could just use v9.7 but at this point I'm having to run the unsupported cards on a separate rig.  I do think you could have warned your users about the chips  that aren't supported.  You did remove the 4xxx and 5xxx/ 6xxx series which I give you credit for but like AMD and there Linux drivers your overall information was sorely lacking due to the omissions in both the op and readme file.  If you could at the very least rectify the op and or readme file to reflect accurately what does and doesn't work that would be appreciated.

[Saphire]

Why do i get this error for ETH mining.

My .bat file
NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal WalletAddress.WorkerName/Mail -xpsw x -allpools 1

What i tried to solve
1) add -nofee 1 (not changed the error)
2) Increased Vİrtual Memory to 30.000 (the same)



By the way there is no problem for v9.7 Beta.

I have 7 Sapphire RX 580 Nitro +

[notbatman]

^^^ try "-dmem 0"

[CryptonikaTrade]

It is very best miner for cryptonight algo IMHO. I mine with it electroneum now

[invicta]

Why do i get this error for ETH mining.

My .bat file
NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal WalletAddress.WorkerName/Mail -xpsw x -allpools 1

What i tried to solve
1) add -nofee 1 (not changed the error)
2) Increased Vİrtual Memory to 30.000 (the same)



By the way there is no problem for v9.7 Beta.

I have 7 Sapphire RX 580 Nitro +

Try -dmem 0 as someone else said, reduce the -h value and increase your virtual memory much more - you need about 7x 8GB = 56GB for those cards really (7 cards I think), I have 48GB on my 6 card rig. dk2an0 error is memory allocation related.

[Saphire]

^^^ try "-dmem 0"

it is ok now, thank you.

[carafleur]

hello,

nicehash issues can be workedaround by adding this line to your hosts file:

127.0.0.1 cryptonight.usa.nicehash.com

claymore will quickly fail on this one and switch to miningpoolhub

[Omg9500]

It is very best miner for cryptonight algo IMHO. I mine with it electroneum now

AMDXMR Miner gives me better results.... I mine ETN and KRB with this depending on profit for each coin. https://www.amdxmrminer.com/downloads/

[clems]

hello,

nicehash issues can be workedaround by adding this line to your hosts file:

127.0.0.1 cryptonight.usa.nicehash.com

claymore will quickly fail on this one and switch to miningpoolhub

I found the same workaround and it is working so far.

[stef_stef]

Why is the miner freezing after assigning the asm algo on the third GPU? I have it set up correctly, lowered the GPU to 1150/1900, and still running into problems. The cards were stable at 1125 and 2080 for ETH

[SirOverdose]

@CLAYMORE

Can you add an option to serialise the startup of each card? I think this would really help!

As a workaround if your cards fail try loading multiple instances of the program with a few cards on each and wait until the memory uses on task manger drops low and then load another batch of cards.

Also drop the memory freq on startup, when you load its drawing a huge amount from the risers filling those cards.....

Also try setting your virtual memory to over the total size of mem on the cards

[clems]

It is very best miner for cryptonight algo IMHO. I mine with it electroneum now

AMDXMR Miner gives me better results.... I mine ETN and KRB with this depending on profit for each coin. https://www.amdxmrminer.com/downloads/

But windob sux.

[oli123]

I need to know what values to allocate for the best result. At the value -dmem 1 and -dmem 0, I have poor results.
For this command with -dmem 1:
NsGpuCNMiner.exe -xpool stratum + tcp: //xlc.my-mine.su: 3333 --xwal LuBjjphj3teSxLC7GxdFyFG1CXwfU3SLLUxPiGgsVJZ6iiu2aJuT5cNUMxQ3xuCQNkWpMcaYnyHfL4F cuJrTUvgE4Bda8Pd -xpsw x --allpools 1
: https://imgur.com/HnFGoeB

With value -dmem 0: https://imgur.com/ptdAfbr

Then it changed the value to -h 832:
NsGpuCNMiner.exe -xpool stratum + tcp: //xlc.my-mine.su: 3333 --xwal LuBjjphj3teSxLC7GxdFyFG1CXwfU3SLLUxPiGgsVJZ6iiu2aJuT5cNUMxQ3xuCQNkWpMcaYnyHfL4F cuJrTUvgE4Bda8Pd -xpsw x --allpools 1 -h 832
The result: https://imgur.com/MJSPDBH
The results are good but I think they can be better. What is the best value of -h for AMD 4 x rx480?

[notbatman]

^^^ -h primarily depends on the amount of video memory available, just let it atuo-tune unless there's a problem. Interesting coin you're mining there BTW.

edit:

I just visited their website and their into graphic immediatly made me think of wow vanilla only with premium graphics, but then I was like oh it's just a stupid CGI info graphic of trees and clicked on "project" ...

"We are a new gaming company. Our core business..."


edit_2:

Blakecoin was doing something along these lines, that project seems bit sluggish last I checked though.

[oli123]

^^^ -h primarily depends on the amount of video memory available, just let it atuo-tune unless there's a problem. Interesting coin you're mining there BTW.

edit:

I just visited their website and their into graphic immediatly made me think of wow vanilla only with premium graphics, but then I was like oh it's just a stupid CGI info graphic of trees and clicked on "project" ...

"We are a new gaming company. Our core business..."


edit_2:

Blakecoin was doing something along these lines, that project seems bit sluggish last I checked though.

These lines are only for testing because I wanted to try out the new Claymore CryptoNote AMD GPU Miner v10.2 Beta - POOL miner if it is more powerful than v9.7. XLC coins do not interest me at this time. About that value -h 832 I read in READme!!! document. But, when I do not set the value, there is low power, somewhere around 320 H/s for the card.