Claymore's CryptoNote AMD GPU Miner v11.3

[Integ]

I'm sorry, but the https://mega.co.nz/#F!e4JVEAIJ!l1iF4z10fMyJzY5-LnyC2A is dead,
and the mirror https://drive.google.com/folderview?id=0B69wv2iqszefdkVDNkxla3BCZHc&usp=sharing Google does not allow to download because it finds a virus...

[1714636297]

1714636297

[1714636297]

1714636297

[1714636297]

1714636297

[1714636297]

1714636297

[Rozerg]

Claymore 10.2 dosen't work with new AMD Driver 17.2.1 - Adrenaline. param tt,ttli,tstop dosen't working. mining is working..

[Trimegistus]

I'm sorry, but the https://mega.co.nz/#F!e4JVEAIJ!l1iF4z10fMyJzY5-LnyC2A is dead,
and the mirror https://drive.google.com/folderview?id=0B69wv2iqszefdkVDNkxla3BCZHc&usp=sharing Google does not allow to download because it finds a virus...

Try using Firefox to download, it will work!

[Claymore]

Claymore 10.2 dosen't work with new AMD Driver 17.2.1 - Adrenaline. param tt,ttli,tstop dosen't working. mining is working..

https://bitcointalk.org/index.php?topic=1433925.msg26397485#msg26397485

[ganzocrypt]

hello,

I am using RX 580 8Gb and would like to know a typical -h (default is ok?) and if -dmem to set -li typical value , any suggestions?
Not sure what hashrate to expect.

thx

[spronkin1]

Hello! I have config file start-XMR-suprnova.bat:

Code:

TIMEOUT 10

@echo off
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
@echo on

NsGpuCNMiner.exe -xpool ssl://xmr-eu.suprnova.cc:5221 -xwal avk113.Rig1 -xpsw x -allpools 1 -retrydelay 4 -ftime 45 -dbg -1 -mport 0 -r 1

pause

When i running it, i get an error:

Code:

╔════════════════════════════════════════════════════════════════╗
║         Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ║
╚════════════════════════════════════════════════════════════════╝

XMR: 1 pool is specified
Main Monero pool is xmr-eu.suprnova.cc:5221
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 4
GPU #0: Ellesmere, 4096 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere, 4096 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Ellesmere, 4096 MB available, 36 compute units
GPU #2 recognized as Radeon RX 480/580
GPU #3: Ellesmere, 4096 MB available, 36 compute units
GPU #3 recognized as Radeon RX 480/580
POOL version
GPU #0 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
GPU #1 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
GPU #2 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
GPU #3 algorithm ASM, -h 900, -dmem 1 (Memory used: 3780MB)
Total cards: 4
XMR: Stratum - connecting to 'xmr-eu.suprnova.cc' <37.187.24.170> port 5221 (SSL/TLS)
"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
Watchdog enabled

SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu.suprnova.cc:5221) (SSL/TLS)
Stratum - reading socket failed 0, disconnect
XMR: Job timeout, disconnect, retry in 4 sec...
XMR: Stratum - connecting to 'xmr-eu.suprnova.cc' <37.187.24.170> port 5221 (SSL/TLS)
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu.suprnova.cc:5221) (SSL/TLS)
Stratum - reading socket failed 0, disconnect
XMR: Job timeout, disconnect, retry in 4 sec...
XMR: Stratum - connecting to 'xmr-eu.suprnova.cc' <37.187.24.170> port 5221 (SSL/TLS)
SSL/TLS encryption is enabled
XMR: Stratum - Connected (xmr-eu.suprnova.cc:5221) (SSL/TLS)
Stratum - reading socket failed 0, disconnect

what happend? help, please!

[jobot]

spronkin1 do you have another pool to try? Perhaps your pool is down?


My question is if I get the error "No ASM binary found for GPU x", does that mean that my card is just not supported. I am running an old Capeverde hd 7770.

Thanks for your help.

[nowaltcoin]

spronkin1 do you have another pool to try? Perhaps your pool is down?


My question is if I get the error "No ASM binary found for GPU x", does that mean that my card is just not supported. I am running an old Capeverde hd 7770.

Thanks for your help.

For HD7700 you have to stick with version 9.7 !

My 6* HD7790 are running fine with 9.7, no support for 10.2 !

Have a nice day

[rascabily]

Miner uses the list of devfee pools if you specified "-allpools 1" option, it selects pool randomly, so it will find a good pool after a few attempts anyway, you don't lose anything because miner mines for you during these attempts.
In next update (2-3 days) I will update this list of pools and exclude nicehash.

Today is the day?

[Claymore]

Miner uses the list of devfee pools if you specified "-allpools 1" option, it selects pool randomly, so it will find a good pool after a few attempts anyway, you don't lose anything because miner mines for you during these attempts.
In next update (2-3 days) I will update this list of pools and exclude nicehash.

Today is the day?

I also added CryptoNight-Lite support (AEON), it took some additional time. I will release new version within 48 hours.

[hozerdev]

Tried to mine with this miner with 3xVega64 and 1xVega56. The miner hangs with whole OS after few minus running. I don't control the voltage and clocks with the miner. I use OverrideNTool. The hashrate is 1650 for vega64 and 1400 for vega56. The cards were set up with this guide: vega.miningguides.com. Cast XMR miner works with no issues, tested for several hours. 2010/1700 kH/s for vega 64/56 accordingly. With the same power table configs, Claymore Dual Miner mines ETH in single mode, 44/40 mHh/s also for hours with no issues.

So two questions:
1) How to stop this miner to crash with Vega's cards?
2) How to get closer to Cast XMR hashrates with this miner?

Upd:
It hangs with Cast XMR too...

[fisher656]

Tried to mine with this miner with 3xVega64 and 1xVega56. The miner hangs with whole OS after few minus running. I don't control the voltage and clocks with the miner. I use OverrideNTool. The hashrate is 1650 for vega64 and 1400 for vega56. The cards were set up with this guide: vega.miningguides.com. Cast XMR miner works with no issues, tested for several hours. 2010/1700 kH/s for vega 64/56 accordingly. With the same power table configs, Claymore Dual Miner mines ETH in single mode, 44/40 mHh/s also for hours with no issues.

So two questions:
1) How to stop this miner to crash with Vega's cards?
2) How to get closer to Cast XMR hashrates with this miner?

Upd:
It hangs with Cast XMR too...

Hi, do you have block-chain drivers installed? if yes, just check AMD crossfire and HBCC.

AMD crossfire off

HBCC   on

it should solve your issue.

[idontknowmining]

Hi,

Just started mining and so have not invested any HW yet.  Have a MSI Radeon HD 7850 which only does 240H/s, I know this is not enough but just
want to make sure I can set this up on my PC before I buy cards.  I'm using the 1.7 version of the AMD driver which I don't think
works with Claymore 10.2, so I'm using 9.7, which works fine.  Is the below syntax ok?

NsGpuCNMiner.exe -o stratum+ssl://xmr-eu1.nanopool.org:14433 -u 48dJamRDpppZ3Nh6W14EPaA794G6iuwQJ2Px8XsJarGjhiE1LQNSbXsgsLLQaZGoLnSwegv9bx5ocXr NbNADtkHgCag3XGp -allpools 1 -p x

I've also being mining from my CPUs (8 x 17) but so far have received zero payment into my account.
Only started 2 days ago.

Also, which cards are best for me.  I don't want get a huge rig, just something small with maybe 3-4 GPUs, so shorter cards are better.

[Claymore]

v11.0:

- improved speed by 1-3%, depends on GPU model.
- fixed issue with invalid shares.
- added CryptoNight-Lite support, use "-lite 1" option to mine AEON.
- improved stability.
- adjusted default "-h" values for various GPUs for better performance, check your settings.
- fixed critical issues in remote management feature (attacker could crash miner even in read-only mode).
- fixed issue with possible GPU crash during miner shutdown.
- updated pools for devfee.
- several minor improvements and fixes.

[ser_ator]

Hi,

Just started mining and so have not invested any HW yet.  Have a MSI Radeon HD 7850 which only does 240H/s, I know this is not enough but just
want to make sure I can set this up on my PC before I buy cards.  I'm using the 1.7 version of the AMD driver which I don't think
works with Claymore 10.2, so I'm using 9.7, which works fine.  Is the below syntax ok?

NsGpuCNMiner.exe -o stratum+ssl://xmr-eu1.nanopool.org:14433 -u 48dJamRDpppZ3Nh6W14EPaA794G6iuwQJ2Px8XsJarGjhiE1LQNSbXsgsLLQaZGoLnSwegv9bx5ocXr NbNADtkHgCag3XGp -allpools 1 -p x

I've also being mining from my CPUs (8 x 17) but so far have received zero payment into my account.
Only started 2 days ago.

Also, which cards are best for me.  I don't want get a huge rig, just something small with maybe 3-4 GPUs, so shorter cards are better.

7850 1gb with clay 9,7 make 350-370 h/s  (play with -a & -h parameter)
7850 2gb can reach 400-420 h/s
(def clocks)
don t use 10.2 version

[idontknowmining]

^^

Thanks, am playing wit them now.  Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?

[joboy84]

wow thank you for this update !

Hashrate raised from 831 h/s to 890 h/s on my rx580

Good work !

[nowaltcoin]

^^

Thanks, am playing wit them now.  Any idea how I get paid of when?
All I can see is that I'm getting shares but after two days nothing.
MY wallet is a monerujo phone wallet.
Should I be using just one pool?

First you should mine  with ADDRESS.WORKER/EMAIL
you can see your income here :
https://xmr.nanopool.org/account/48dJamRDpppZ3Nh6W14EPaA794G6iuwQJ2Px8XsJarGjhiE1LQNSbXsgsLLQaZGoLnSwegv9bx5ocXrNbNADtkHgCag3XGp
under settings you have to type your (secret) EMAIL from above
minimum payment is 0.3 XMR !

Have a nice day

[clems]

Just test it with my 6 RX 580 Nitro + on ETN

Version 10.2 beta: XMR: GPU0 820 H/s, GPU1 820 H/s, GPU2 820 H/s, GPU3 820 H/s, GPU4 820 H/s, GPU5 819 H/s
with -h 1800 by defaut

Version 11: XMR: GPU0 832 H/s, GPU1 839 H/s, GPU2 839 H/s, GPU3 833 H/s, GPU4 833 H/s, GPU5 839 H/s
with -h 1152 by defaut



Claymore V10.2 H: ~ 4920
Claymore V11 H: ~ 5020

Thanks man !!!!!!!!!!!!!!!!!!!!!!

[rascabily]

wow thank you for this update !

Hashrate raised from 831 h/s to 890 h/s on my rx580

Good work !

pls can .bat here?