Claymore's CryptoNote AMD GPU Miner v11.3

[giorgio23]

^^^

VRM:

Code:

300 888
1125 888
2000 888

must admit i don't understand what you mean with that? i se no VRM in Polaris bios

[notbatman]

^^^

VRM:

Code:

300 888
1125 888
2000 888

must admit i don't understand what you mean with that? i se no VRM in Polaris bios

Once you're able to decode it, you'll find it somewhat useful. 

[giorgio23]

^^^

VRM:

Code:

300 888
1125 888
2000 888

must admit i don't understand what you mean with that? i se no VRM in Polaris bios

Once you're able to decode it, you'll find it somewhat useful. 

i think you mean VRAM, MHZ and mV?

[abjake]

Please help: I've tried tons of xmr pools, tons of config files, and I'm still getting "./nsgpucnminer: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory" Does anyone have a fix for this?

I've been working on getting this rig running for almost 2 months with no success, if you can even point me in the right direction of someone who can help or a thread that I missed in this forum.

I'm running 3 vega 64s on ubuntu, trying to use Claymore 11

[trooperx]

Well my powered PCIE risers arrived and with both Gigabyte Aorus RX580's connected with them, my hash rate has gone up from 831 to 872 H/s each  

My 2 x MSI Armor RX580's have also arrived and I'm just about to install them.

[BSAlex]

Please help: I've tried tons of xmr pools, tons of config files, and I'm still getting "./nsgpucnminer: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory" Does anyone have a fix for this?

I've been working on getting this rig running for almost 2 months with no success, if you can even point me in the right direction of someone who can help or a thread that I missed in this forum.

I'm running 3 vega 64s on ubuntu, trying to use Claymore 11

It's not CCN 11.0 problem. No decent VEGA Linux drivers up to date. Switch to windows 10 or wait until AMD will make decent drivers for linux.

[Mrangel]

Yeah here too nanopool reports 8500hs and claymore 9400hs

Hmmm. +1
Claymore, what can you say about this?

Check GPU load in gpu-z (must be 100% all the time).
I will do some tests in 1-2 days to confirm that the miner produces correct number of shares, though I already did it for v11.

UPD: It seems I found the reason, when pool sends new job, v11.0 drops old job too late (loses 1-2 sec). I have fixed this bug but it will take 1-2 days to test it properly and release an update. However, you can test a fix right now if you want and tell me if it helps:
https://mega.nz/#!TlYQAJSZ!291Swk4GbJLC5JYmax_fc-tLWjfwKsFTnOUSVGqsDlA

Testing it on nanopool lets see how it goes

[notbatman]

Please help: I've tried tons of xmr pools, tons of config files, and I'm still getting "./nsgpucnminer: error while loading shared libraries: libOpenCL.so.1: cannot open shared object file: No such file or directory" Does anyone have a fix for this?

I've been working on getting this rig running for almost 2 months with no success, if you can even point me in the right direction of someone who can help or a thread that I missed in this forum.

I'm running 3 vega 64s on ubuntu, trying to use Claymore 11

Code:

./amdgpu-pro-install --compute

Install AMD-APP-SDK too.

oh and

Code:

sudo apt-get install ocl-icd-opencl-dev

then do what this says. -- https://github.com/RadeonOpenCompute/ROCm

finally update your grub with (for mining ETH)

GRUB_CMDLINE_LINUX_DEFAULT "amdgpu.vm_fragment_size=9"

Code:

sudo update-grub

edit:

I'm not sure but claymore might not support vega under linux.

[trooperx]

I'm in need of Help, i'm only getting 631H/s on my current setup, not 1k like many of you.

My setup:
Gigabyte h110-D3A motherboard
Gigabyte RX580 Gaming 4GB card, Hynix

Claymore's CryptoNote AMD GPU Miner v11.0

settings in bat-file:
setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

NsGpuCNMiner.exe -xpool stratum+tcp://xmr.pool.minergate.com:45560 -xwal /Removed/-xpsw x -tt 75 -cclock 1200 -mclock 2200 -cvddc 900 -mvddc 940 -dmem 1

AMS Readon software: AMD Radeon 17.30.1029

Hynix code: 777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB0300000 01B162C31C0313F17

i don't understand what i can do more

I'm not sure if anyone has actually said they are getting 1000 H/s with a Gigabyte card, they don't seem to be that good of a make.  The best I have managed with my Gigabyte Aorus 8Gb RX580's is 872 H/s.

[davil1234]

claymore v11 memory used down from v10.2
Speed of use down.
Help fix the problem. for Memory 8GB.

https://www.img.in.th/image/cBLIv

The details are in the picture.

[giorgio23]

I'm not sure if anyone has actually said they are getting 1000 H/s with a Gigabyte card, they don't seem to be that good of a make.  The best I have managed with my Gigabyte Aorus 8Gb RX580's is 872 H/s.

but there is still a big difference between 630 and 872 H/s.

[giorgio23]

^^^

VRM:

Code:

300 888
1125 888
2000 888

must admit i don't understand what you mean with that? i se no VRM in Polaris bios

Once you're able to decode it, you'll find it somewhat useful. 

wow, went up to 735H/s
SUPER THANKS!!
any othe rtips that i can decode :-)

[trooperx]

*edit* nvm!

[Sixsonic]

Anyone know why this can be?

XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00
XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s

Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?

[notbatman]

Anyone know why this can be?

XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00
XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s

Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?

I suspect it's had too much current and got fried, drop the VRM memory clock and move the mining strap down a notch it still might have some life left.

Have you been mining Equihash or dual mining ETH & DCR?

[Sixsonic]

Anyone know why this can be?

XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00
XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s

Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?

I suspect it's had too much current and got fried, drop the VRM memory clock and move the mining strap down a notch it still might have some life left.

Have you been mining Equihash or dual mining ETH & DCR?

All cards work great on Claymore v9.7, all versions from 10 are doing this for me. Card is not dead. Not dual mining yet, planning on to.

[gaetans]

Hi,
I do not want to modify my cards' BIOSes but I would like to use the software to improve a little H/s.

I have 6 rx580 8gb mining monero with linux (Ubuntu 16.04)

Can you please help me in how to push them a little more with the following values?

-cclock -mclock  -cvddc  -mvddc 

any help is really appreaciated.
G.

[notbatman]

Anyone know why this can be?

XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00
XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s

Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?

I suspect it's had too much current and got fried, drop the VRM memory clock and move the mining strap down a notch it still might have some life left.

Have you been mining Equihash or dual mining ETH & DCR?

All cards work great on Claymore v9.7, all versions from 10 are doing this for me. Card is not dead. Not dual mining yet, planning on to.

V11 uses a bit more power, try my suggestion or RMA; it's probably a manufacturing defect.

[Coinerrr]

Yeah here too nanopool reports 8500hs and claymore 9400hs

Hmmm. +1
Claymore, what can you say about this?

Check GPU load in gpu-z (must be 100% all the time).
I will do some tests in 1-2 days to confirm that the miner produces correct number of shares, though I already did it for v11.

UPD: It seems I found the reason, when pool sends new job, v11.0 drops old job too late (loses 1-2 sec). I have fixed this bug but it will take 1-2 days to test it properly and release an update. However, you can test a fix right now if you want and tell me if it helps:
https://mega.nz/#!TlYQAJSZ!291Swk4GbJLC5JYmax_fc-tLWjfwKsFTnOUSVGqsDlA

Testing it on nanopool lets see how it goes

Please let us know your feedback

[Sixsonic]

Anyone know why this can be?

XMR - Total Speed: 5537 H/s, Total Shares: 1(0+1+0+0+0+0), Rejected: 0, Time: 00:00
XMR: GPU0 953 H/s, GPU1 953 H/s, GPU2 954 H/s, GPU3 770 H/s, GPU4 954 H/s, GPU5 953 H/s

Note the 770 (will go to 0 aswell), all same cards, all same bios all same clocks. With claymore 9.7 all fine. Anyone has an idea on how to crank this one up aswell?

I suspect it's had too much current and got fried, drop the VRM memory clock and move the mining strap down a notch it still might have some life left.

Have you been mining Equihash or dual mining ETH & DCR?

All cards work great on Claymore v9.7, all versions from 10 are doing this for me. Card is not dead. Not dual mining yet, planning on to.

V11 uses a bit more power, try my suggestion or RMA; it's probably a manufacturing defect.

I haven’t touched the voltage, these cards are 6 days old. It can’t be fried. You really think that can be? 6x Asus O4C RX570