Claymore's CryptoNote AMD GPU Miner v11.3

[th00ber]

Anyone knows the best intensity on Vega ?

[dotachin]

Claymore, is there a way to NOT CRASH in case of Internalservererror? https://i.imgur.com/fHhQtiL.png

Ok, 11.2 does not crash in this case. Please check as there may be others wrong pool replies.

Thank you, no changes to -h were needed. Btw, does -li work in this miner?

[xeridea]

Anyone knows the best intensity on Vega ?

CM not optimized for Vega yet, use Cast XMR, 1900H+ (CM gets ~1400).  Use blockchain driver, and every reboot need to disable/enable card in device manager. Cast XMR stable though, haven't had to reboot in weeks. CM will probably optimize at some point, but hasn't yet.

[christiano88]

Please provide Linux updated miner Claymore

[notbatman]

^^^ this, with NH updates. ..

[IojkinKot]

Hi Claymore!
Please, add option -minspeed as in dual miner

[0xb1]

There seems to be a problem with this version.

My Setup:

2x Sapphire Nitro+ RX580 4GB (1375/2000)
Beta Blockchain Driver Aug23

My Result / Claymore 11.2

980h/315h

My Result / Claymore 10.2

910h/910h

Hmmmm.. Anyone else got it like this??

Update #1

Drivers 17.12.2 + Claymore 11.2

503h/339h

Drivers 17.12.2 + Claymore 10.2

888h/894h (very inconsistent tho)

Update #2

Did a fresh/clean install of Beta Blockchain Drivers and testd 11.2 again:

971h/967h

Dont ask my why what how... but it works now.

Update #3

After restarting it went back to 980h/315h

Not sure whats up with that.

[dragonmike]

Hello guys, I've missed a few versions. Is Claymore hosting an update/version log anywhere? I'd like to know if it's worth the hassle for me to update my miners with the latest version at all.

[0xb1]

Hello guys, I've missed a few versions. Is Claymore hosting an update/version log anywhere? I'd like to know if it's worth the hassle for me to update my miners with the latest version at all.

Check history file within release

(Edited post cause i misunderstood you at first)

[Okda]

Hi all

excuse me for asking about an older version, the 9.7 since i am using Caymen vga cards

 Claymore 9.7 doesn't recognize Electroneum wallet addresses

can this be tweaked or solved ?

Thanks in advance

any version above 9.7 gives the below errors which i couldn't solve also
"No ASM binary found for GPU 0"


Solved: i had to include -allpools 1 in start.bat

[invicta]

Claymore, is there a way to NOT CRASH in case of Internalservererror? https://i.imgur.com/fHhQtiL.png

Ok, 11.2 does not crash in this case. Please check as there may be others wrong pool replies.

Thank you, no changes to -h were needed. Btw, does -li work in this miner?

Dotachin, I am having this exact problem and it wiped out 4 of my 6-GPU rigs just now, which is killing my effective hashrate. I'm also on NiceHash like you. Does updating to 11.2 fix it? In which case I'll move all rigs to that now - most of mine are on 10.2 and 11.0.

[davil1234]

I use the RX580 8GB graphics card. Why is version 10.2 more memory than version 11?

Version 11 speed is very low. And I used the -h command, and it does not help speed up the speed.


Below is a sample image.

https://www.picz.in.th/images/2018/01/07/26695477_1558341427567618_621453770_o.png

[invicta]

I use the RX580 8GB graphics card. Why is version 10.2 more memory than version 11?

Version 11 speed is very low. And I used the -h command, and it does not help speed up the speed.

-h switch controls the memory usage too so it should probably be -h 1800 on the other side of your image but it'll be something else like an intensity setting or clock speed perhaps.

[d-unknown]

hi claymore, i've a little issue that makes me crazy

i'm using version 11.2 and when an error occurs with the pool (nicehash) ,immediately gpu 0 crashes , and only gpu 0 on allmost all my rigs

Error in server response
: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Internalservererror"}}
Stratum - reading socket failed 10038, disconnect
XMR: Job timeout, disconnect, retry in 20 sec...

need to reboot rigs, reapplying OC to gpu 0 doesn't help, i mean mining wont start again without rebooting

note that no GPU0 crashes if i unplug and plug manually the ethernet cable

[idontknowmining]

Anybody know what I can do to improve performance in my rig

Have 3 x RX570 4GB.  Am running v 11.2 with the -h set to 896.
Card is clocked to 1350 (1250 is standard) and the miner never seems to get it to rin over the 1200Mhz range.
I chance the -h to 1400 and increase the Mem clock on the card but this just crashed the rig.
There are not other options set in my config file.
I'm getting 670 H/s on each card currently.

I have the latest blockchain drivers installed, catalyst 15.2 and afterburner.

Thanks

[xeridea]

Anybody know what I can do to improve performance in my rig

Have 3 x RX570 4GB.  Am running v 11.2 with the -h set to 896.
Card is clocked to 1350 (1250 is standard) and the miner never seems to get it to rin over the 1200Mhz range.
I chance the -h to 1400 and increase the Mem clock on the card but this just crashed the rig.
There are not other options set in my config file.
I'm getting 670 H/s on each card currently.

I have the latest blockchain drivers installed, catalyst 15.2 and afterburner.

Thanks

Bios mod card. What memory type?

[idontknowmining]

Bios mod card. What memory type?

Samsung GDDR5 - 4GB.

Interesting thing is of the 3 cards, 2 have Crossfire enabled and one has it disabled.
What should it be?

When I clock is currently with afterburner, just clocking the memory, as soon as the miner
connects to the pool the rig crashes and the OS becomes unresponsive.  I'm on Win10.

[hamaranta]

anybody work with rx550 ddr5 4gb? working smoothly with rx580. but running rx550 hang on start claymore

[yyfong]

anybody work with rx550 ddr5 4gb? working smoothly with rx580. but running rx550 hang on start claymore

I use sgminer 5.5.5-gm, 3x RX550 2GB, total 960H/s, no devfee.

stock setting without overclock / undervolt.

[Santunes]

Hi Claymore.

I have a Rig with 6 ati Rx570 from saphire. I have been minning ethereum with you miner version 10.2 and it is working fine, but tried minning electroneum ( monero) with 10.2 and with the latest version and have a error... with version 9.7 mines ok, but is giving errors on the dev fee says it cant connect. But no crashes on the miner...
I have the folowing error:
GPU 1, GpuMiner dk2an0 failed -4
- this one randomly on all gpu 2 at a time, starts to mine and the  the miner crashes and restarts.
Is says i am making 700 hs on each card ( 9.7 makes 620 about that...)
The cards only have the bios mod for eth ( the 1500 strap to above) They are stable on ethereum...

Claymore CryptoNote AMD GPU Miner v11.2 - POOL
 This is my start.bat

NsGpuCNMiner.exe -xpool stratum+ssl://etn-eu1.nanopool.org:13433 -xwal my etnadress.RIG_ATI/myemail -xpsw x -allpools 1

Can you or any one help.
Best regards.