CreamyG31337
Member
Offline
Activity: 113
Merit: 10
|
|
January 21, 2018, 08:11:08 PM |
|
Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?
I used stratum+tcp://yiimp.eu:3737 (and 3777) for the coin I used "unspecified x17" and then I put in my XVG wallet But when starting mining it keeps saying "retry after 30 sec"
Also If I use the ccminer without awesome miner it works.
I also think that more pools and more coins and algos should be added to AM. There are so many users of AM that are loosing money because AM is lacking more pools and lacking especially very high profit algos like phi that is the number one mined algo on almost all pools for days and the users that bought and paid for AM are loosing money for days because AM is lacking PHI support.check that more than 50% of the pool is on PHI now: http://yiimp.eu/site/mining or https://www.ahashpool.com/ and they make more money than the others (on what side are you ? ) If AM will have more pools and missing algos, users that paid won't have troubles making more money, right ? What's so hard about setting it up right now by yourself? In five minutes you can add the miner, add the algo, and add the coin, and get a box of kleenex to wipe away those tears. Feature request / possible bug: You can't highlight multiple miners if they're in different groups. Ctrl/shift click doesn't work anyways.
|
BTC tip jar: bc1qtepyll2c9fkn67wpnhunclw4mf39nc2jx79zdh
|
|
|
ruplikminer
Jr. Member
Offline
Activity: 504
Merit: 3
|
|
January 21, 2018, 08:24:50 PM |
|
Hi,
I am trying to have AM mine using Claymore Dual Miner ETH+PASC with no success. Can anyone help me? It keeps mining but ONLY ETH. Not going in dual mode.
thanks!
|
|
|
|
WCSSTORE
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 21, 2018, 08:35:07 PM |
|
Hi,
I am trying to have AM mine using Claymore Dual Miner ETH+PASC with no success. Can anyone help me? It keeps mining but ONLY ETH. Not going in dual mode.
thanks!
Did you set up 2 different pools? 1 for ETH and 1 for PASC. After that you combine both pools into a pool group. When setting up a new miner chose claymore dual, then on dual mode click eth/pasc, then choose your new pool group.
|
|
|
|
puwaha
|
|
January 21, 2018, 09:37:54 PM |
|
I might have stupid question but I just started with mining 1. How do I setup my Awesome miner to show me daily/monthly profit in USD? AM shows you this on the miners tab. Click on the Appearance tab at the top, then change the Miner view from compact list to list. It will show you the daily and monthly profit for each rig 2. How do I setup my Awesome miner to show me my real profit (daily profit-elec.cost)? Same thing as #1 above. AM shows you the revenue and profit calculations on the list view. 3. How do I setup my Awesome miner soft to show me what is my balance in my coinbase wallet? Impossible. Your Coinbase wallet address is not a public address. No coin explorer can see it, thus AM can't see it. There may be a way with AM's ability to run C++ code, but you'd have to come up with the code to interface with your Coinbase API key. I'm sure you've read this before, but you shouldn't mine to an exchange wallet, nor keep significant amounts of coin on an exchange. You should keep your coins on your private wallet where you control the private keys.
|
|
|
|
puwaha
|
|
January 21, 2018, 09:44:27 PM |
|
Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?
I used stratum+tcp://yiimp.eu:3737 (and 3777) for the coin I used "unspecified x17" and then I put in my XVG wallet But when starting mining it keeps saying "retry after 30 sec"
Also If I use the ccminer without awesome miner it works.
I also think that more pools and more coins and algos should be added to AM. There are so many users of AM that are loosing money because AM is lacking more pools and lacking especially very high profit algos like phi that is the number one mined algo on almost all pools for days and the users that bought and paid for AM are loosing money for days because AM is lacking PHI support.check that more than 50% of the pool is on PHI now: http://yiimp.eu/site/mining or https://www.ahashpool.com/ and they make more money than the others (on what side are you ? ) If AM will have more pools and missing algos, users that paid won't have troubles making more money, right ? What's so hard about setting it up right now by yourself? In five minutes you can add the miner, add the algo, and add the coin, and get a box of kleenex to wipe away those tears. Feature request / possible bug: You can't highlight multiple miners if they're in different groups. Ctrl/shift click doesn't work anyways. To backup Creamy's point... that's the beauty of AM. You have the ability to add these options in minutes. Remember, mining is a competitive game, especially for new coins. You can setup an algo, coin, pool, and miner in minutes and mine the crap out of a coin before it becomes popular. If it was all added into the box with AM... sure it would be convenient, but thousands of other AM users would jump on that coin, crowding out your potential mining returns. Awesome Miner is a facilitator, not a service provider.
|
|
|
|
puwaha
|
|
January 21, 2018, 09:50:59 PM |
|
Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?
I used stratum+tcp://yiimp.eu:3737 (and 3777) for the coin I used "unspecified x17" and then I put in my XVG wallet But when starting mining it keeps saying "retry after 30 sec"
Also If I use the ccminer without awesome miner it works.
Did you put "c=XVG" (without quotes) in the password field of your pool for yiimp.eu XVG? For basically all yiimp style pools, you just need your coin's wallet address in the worker name field, and the c=XXX in the password field... where XXX is the coin's code you are mining.
|
|
|
|
puwaha
|
|
January 21, 2018, 10:14:57 PM |
|
ppl did some one manage to make nanopool in awesome miner? there is a worker name and pass with e-mail can some make a screen please? or just give some examp. and same story with balance ... And how u can add xmr cast vega just like external miner, no manage one ?!? claymore has default port 3333 and i'm not sure about xmr cast vega. may be i need to insert some in bat file? What are you trying to mine at nanopool? I'm assuming it's either Monero or Electroneum since you are asking about XMR Cast Vega. Cast XMR is built into AM, so I would try with this mining software first. When you setup your pool information in AM for nanopool, the server URL should be: xmr-us-east1.nanopool.org:14444 Change the "us-east1" part to your region's server URL. See here for the other region server names: https://xmr.nanopool.org/helpIf you are mining ETN, then lookup the server and port name here: https://etn.nanopool.org/helpThe worker name that you put into the pool definition for AM is going to be different depending on what kind of wallet you are mining to. The easiest to setup looks to be to your local wallet. It has the format of ADDRESS.WORKER so your worker name would be your Monero or ETN address only. On the Managed Miner is where you tick the box to append the worker name to the pool worker name. So if your worker name in the pool definition is ABC123, and the appended worker name in the Managed Miner is RIG1 then AM will put those two together to be ABC123.RIG1 which is the format that nanopool is expecting for mining to your local wallet. If you are mining to an exchange or a local wallet that requires the payment ID, then you append that to your wallet address in the pool definition. So, the pool definition worker name would look like: ABC123.PayID And then you still append the worker name from the Managed Miner of RIG1 so that AM will put it all together to be ABC123.PayID.RIG1 If you need to add an email address, then you put that in the Managed Miner worker name appending. So if you had the pool definition worker name of ABC123.PayID and then your Managed Miner worker name was RIG1/emailaddress@mail.com then AM will put that all together as ABC123.PayID.RIG1/emailaddress@mail.com The pool password doesn't seem to matter so you can put an x.
|
|
|
|
puwaha
|
|
January 21, 2018, 10:24:36 PM |
|
Well, my things are going from bad to worse. This is what my AM dashboard is showing right now. Both miners are spending more time idling than working. EDIT: Just upgraded to the latest Dev version - both, the monitoring PC as well as both remote clients on the miners. No change, still restarting both miners at the exact same time every 15-20 minutes. Thucar, can you give us some more details as to what you are mining? What coin, what algo, what mining software, what pool, etc? Are you using a regular Managed Miner or a Profit Miner? If Profit Miner, then what service(s) are you using? If you stop your miner and right-click it and select Diagnostics, can you post that here?
|
|
|
|
puwaha
|
|
January 21, 2018, 10:29:32 PM |
|
Hi there,
Is it supports Magi (XMG) Coin (it's CPU mining)?!
Thank you!
That coin uses the M7M algo which is not built in AM currently. You would need to setup the algo, the coin, upload your custom mining software to your rigs, then setup the pool, and finally point your rigs to everything you just setup.
|
|
|
|
btesla
Newbie
Offline
Activity: 22
Merit: 0
|
|
January 21, 2018, 10:35:33 PM |
|
Hi there,
Is it supports Magi (XMG) Coin (it's CPU mining)?!
Thank you!
That coin uses the M7M algo which is not built in AM currently. You would need to setup the algo, the coin, upload your custom mining software to your rigs, then setup the pool, and finally point your rigs to everything you just setup. Thank you for your answer!
|
|
|
|
manvsrice
Newbie
Offline
Activity: 16
Merit: 0
|
|
January 21, 2018, 10:38:22 PM |
|
Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?
|
|
|
|
WCSSTORE
Newbie
Offline
Activity: 12
Merit: 0
|
|
January 21, 2018, 11:59:23 PM |
|
Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?
I used stratum+tcp://yiimp.eu:3737 (and 3777) for the coin I used "unspecified x17" and then I put in my XVG wallet But when starting mining it keeps saying "retry after 30 sec"
Also If I use the ccminer without awesome miner it works.
Did you put "c=XVG" (without quotes) in the password field of your pool for yiimp.eu XVG? For basically all yiimp style pools, you just need your coin's wallet address in the worker name field, and the c=XXX in the password field... where XXX is the coin's code you are mining. THANK YOU!!!! It worked.
|
|
|
|
CreamyG31337
Member
Offline
Activity: 113
Merit: 10
|
|
January 21, 2018, 11:59:28 PM |
|
Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?
It sounds like you didn't even try to add it yourself. Why don't you do that? Let the developer fix stuff that you can't do yourself in 5 minutes work.
|
BTC tip jar: bc1qtepyll2c9fkn67wpnhunclw4mf39nc2jx79zdh
|
|
|
moppidoo
Jr. Member
Offline
Activity: 348
Merit: 5
|
|
January 22, 2018, 12:36:03 AM |
|
Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?
http://www.awesomeminer.com/help.aspx (Yes...be surprised Awesome Miner's official site has a comprehensive Help / FAQ page) Contains everything you need to know about how to add custom algo/coins/pools/softwares to get LUX mining going
|
|
|
|
thucar
Newbie
Offline
Activity: 8
Merit: 0
|
|
January 22, 2018, 03:18:56 AM |
|
Well, my things are going from bad to worse. This is what my AM dashboard is showing right now. Both miners are spending more time idling than working. https://i.snag.gy/M4wiKn.jpgEDIT: Just upgraded to the latest Dev version - both, the monitoring PC as well as both remote clients on the miners. No change, still restarting both miners at the exact same time every 15-20 minutes. Thucar, can you give us some more details as to what you are mining? What coin, what algo, what mining software, what pool, etc? Are you using a regular Managed Miner or a Profit Miner? If Profit Miner, then what service(s) are you using? If you stop your miner and right-click it and select Diagnostics, can you post that here? This is my original problem description: I've been using AM for a month now and I'm absolutely loving it. However, after the latest update (v4.3.2) my miners restart very often. Their Uptimes used to be in hours and even days, whereas now it's a rare occasion to see them reach one full hour.
Specifics: Running Profit Miners with MPH as the only pool selected. Only allowing two algo's(cryptonight and equihash) And it's not that they would switch between the algos when they restart. They just stop mining Equihash and then start at it again.
I'm facing the same problem, but for me the miners restart exactly every 2.5 minutes and it would happen to all running miners at the same time (GPU and CPU). It's like something is forcing the miners to restart. Profit switching still works though at the interval that I have set. So the restarts every 2.5 minutes is not due to switching to a different algorithm. Even with profit switching is off and miners setup to mine one coin only, it would behave the same way. The general answer first: A later version of Awesome Miner often includes later versions of the mining software as well and these kind of crashes that happens after a while has often very little to do with Awesome Miner. To troubleshoot, is it a specific software like EWBF or Claymore Cryptonight that is crashing? Is it the only software that is instable, or what about the others? I did see your previous post that you could see this for both CPU and GPU mining. I would recommend to take a look at the rules you have in Awesome Miner. Also, is this on a remote computer via Remote Agent? I also noticed few lines of the log file in a previous post, but it was a little too short of information what happend just before those lines. Was it a crash that Awesome Miner detected and simply restarted the mining software? Was it a rule that triggered and forced a restart? I see pythus got his issue resolved, unfortunately for me it seems to be a different cause. I'm only using Claymore Zcash miner and Claymore Cryptonight miner. I have two dedicated mining rigs managed over the Remote Manager. They both get stopped/started at the same time. Looking at the log file, it seems to be happening just around the time Awesome Miner does profitability calculations. 18.01.2018 4:08:10.932 [031] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630 18.01.2018 4:08:16.049 [030] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630 18.01.2018 4:08:16.049 [020] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.109:9630 18.01.2018 4:08:21.150 [033] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.109:9630 18.01.2018 4:08:21.150 [037] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630 18.01.2018 4:08:26.236 [011] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.109:9630 18.01.2018 4:08:26.236 [010] [E]ChannelManagerBase: ProtocolException for channel: AwesomeMiner.Service.Contracts.ServiceContracts.IMinerService, 192.168.32.106:9630 18.01.2018 4:08:28.030 [025] [S]Managed Profit Switching. Profile: AMD GPU - Miner1, type: Single 18.01.2018 4:08:28.030 [025] [S] Enabled mining software: ZecClayMiner,CnClayMiner 18.01.2018 4:08:28.030 [025] [S]PoolServiceManager.GetAsPools, pools: 99 18.01.2018 4:08:28.077 [025] [S]PoolServiceManager.GetAllEnabledPools, pools: 42 18.01.2018 4:08:28.077 [025] [S]PoolServiceManager.GetAllEnabledPools, SinglePoolCM predefined count: 116 18.01.2018 4:08:28.077 [025] [S] Enabled pools: count: 42, EnabledPools: Zpool, MiningPoolHub 18.01.2018 4:08:28.092 [025] [S]Profitability information: MiningPoolHub [Equihash] [Zclassic (ZCL)], Url: stratum+tcp://europe.equihash-hub.miningpoolhub.com:17023, Profit: 0,00072000414218971, Priority: 0 Zpool [Equihash], Url: stratum+tcp://equihash.mine.zpool.ca:2142, Profit: 0,00056390852, Priority: 0 MiningPoolHub [CryptoNight], Url: stratum+tcp://europe.cryptonight-hub.miningpoolhub.com:17024, Profit: 0,0003396555888, Priority: 0
18.01.2018 4:08:28.092 [025] [S]Managed Profit Switching processing: Miner-1, IsRunning: False 18.01.2018 4:08:28.092 [025] [S] Profitability, poolChanged: False, Algorithm: Equihash -> Equihash, EngineType: ZecClayMiner ->ZecClayMiner, EngineSubType: Disabled ->Disabled, AutoDownload: True, EnginePath: Diagnostics of one of the miners: Starting Diagnostics. Awesome Miner version: 4.3.4 Starting Mining Software Setting up Miner Engine. Instance: 1 Engine Type: ZecClayMiner, Auto Download: True, EnginePath: , Subtype: Disabled, CustomExecutable: Added rule for: C:\Users\Miner\AppData\Roaming\AwesomeMinerService\ZecMiner64_1\Claymore's ZCash AMD GPU Miner v12.6\ZecMiner64.exe C:\Users\Miner\AppData\Roaming\AwesomeMinerService\ZecMiner64_1\Claymore's ZCash AMD GPU Miner v12.6\ZecMiner64.exe -wd 1 -r -1 -mport 4028 -logfile C:\Users\Miner\AppData\Local\AwesomeMinerService\claylog.txt (WindowMode: ConsoleFormat, EngineType: ZecClayMiner, IsProfitMiner: True) Configuration: POOL: stratum+tcp://equihash.mine.zpool.ca:2142, WALLET: xxx.Miner-1, PSW: c=BTC, ALLPOOLS: 1 POOL: stratum+tcp://europe.equihash-hub.miningpoolhub.com:17023, WALLET: thucar.Miner-1, PSW: x, ALLPOOLS: 1
Mining Engine Process started, PID: 3928
==================================================================================================== 05:10:50:208 8ac args: -wd 1 -r -1 -mport 4028 -logfile C:\Users\Miner\AppData\Local\AwesomeMinerService\claylog.txt 05:10:50:208 8ac 05:10:50:208 8ac ����������������������������������������������������������������ͻ 05:10:50:208 8ac � Claymore's ZCash AMD GPU Miner v12.6 � 05:10:50:208 8ac ����������������������������������������������������������������ͼ 05:10:50:208 8ac 05:10:50:411 8ac ZEC: 2 pools are specified 05:10:50:411 8ac Main ZCash pool is equihash.mine.zpool.ca:2142 05:10:51:752 8ac OpenCL platform: AMD Accelerated Parallel Processing 05:10:51:752 8ac OpenCL initializing... 05:10:51:768 8ac driver 10, 0, 1912, 5 05:10:51:768 8ac AMD Cards available: 4 05:10:51:768 8ac GPU #0: Pitcairn, 3072 MB available, 20 compute units 05:10:51:768 8ac GPU #0 recognized as Radeon 270/270X 05:10:51:768 8ac GPU #1: Pitcairn, 2048 MB available, 20 compute units 05:10:51:768 8ac GPU #1 recognized as Radeon 270/270X 05:10:51:768 8ac GPU #2: Pitcairn, 2048 MB available, 20 compute units 05:10:51:768 8ac GPU #2 recognized as Radeon 270/270X 05:10:51:768 8ac GPU #3: Pitcairn, 2048 MB available, 20 compute units 05:10:51:768 8ac GPU #3 recognized as Radeon 270/270X 05:10:51:768 8ac POOL version 05:10:51:768 8ac b571 05:10:51:768 8ac Platform: Windows 05:10:51:877 8ac start building OpenCL program for GPU 0... 05:10:51:877 8ac done 05:10:52:095 8ac start building OpenCL program for GPU 1... 05:10:52:095 8ac done 05:10:52:314 8ac start building OpenCL program for GPU 2... 05:10:52:314 8ac done 05:10:52:532 8ac start building OpenCL program for GPU 3... 05:10:52:532 8ac done 05:10:52:782 8ac GPU #0 algorithm ASM, intensity 6 05:10:52:829 8ac GPU #1 is going to use too high intensity (6), not enough GPU memory, intensity value reduced (4) 05:10:52:829 8ac GPU #1 algorithm ASM, intensity 4 05:10:52:860 8ac GPU #2 is going to use too high intensity (6), not enough GPU memory, intensity value reduced (4) 05:10:52:860 8ac GPU #2 algorithm ASM, intensity 4 05:10:52:907 8ac GPU #3 is going to use too high intensity (6), not enough GPU memory, intensity value reduced (4) 05:10:52:907 8ac GPU #3 algorithm ASM, intensity 4 05:10:52:907 8ac Total cards: 4 05:11:05:870 e1c ZEC: Stratum - connecting to 'equihash.mine.zpool.ca' <149.56.122.76> port 2142 (unsecure) 05:11:05:948 8ac Watchdog enabled 05:11:05:948 8ac Remote management is enabled on port 4028 05:11:05:948 8ac Warning: use negative -mport option value (read-only mode) or disable remote management entirely if you think that you can be attacked via this port! 05:11:05:948 8ac
05:11:06:011 e1c send: {"id": 1, "method": "mining.subscribe", "params": ["equihashminer", null, "equihash.mine.zpool.ca", "2142"]}
05:11:06:011 e1c send: {"id": 2, "method": "mining.authorize", "params": ["xxx.Miner-1","c=BTC"]}
05:11:06:011 e1c send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
05:11:06:026 e1c ZEC: Stratum - Connected (equihash.mine.zpool.ca:2142) (unsecure) 05:11:06:759 e1c got 188 bytes 05:11:06:759 e1c buf: {"id":1,"result":[[["mining.set_target","0001fffe00000000000000000000000000000000000000000000000000000000"],["mining.notify","63633cf7513f10485e657dde778ce477"]],"81009f08"],"error":null}
05:11:06:759 e1c parse packet: 187 05:11:06:759 e1c new buf size: 0
==================================================================================================== Stopping miner process ... Stopping Mining Software Diagnostics completed
|
|
|
|
CrypotoCreanis
Member
Offline
Activity: 124
Merit: 10
Don’t do a screen name after 4 glasses of Chianti
|
|
January 22, 2018, 03:55:22 AM |
|
Hey all. I have enabled Web server and setup my port forwarding. I am able to open the web browser and view my stats from my laptop, but can not make it work from my mobile device. What steps am I missing?
|
|
|
|
eminer001
Newbie
Offline
Activity: 140
Merit: 0
|
|
January 22, 2018, 04:11:29 AM |
|
Hi there,
Is it supports Magi (XMG) Coin (it's CPU mining)?!
Thank you!
That coin uses the M7M algo which is not built in AM currently. You would need to setup the algo, the coin, upload your custom mining software to your rigs, then setup the pool, and finally point your rigs to everything you just setup. AM should have M7M algo built in, hundreds of people that paid for AM will benefit from having the possibility to mine more coins and algos that are missing now.
|
|
|
|
eminer001
Newbie
Offline
Activity: 140
Merit: 0
|
|
January 22, 2018, 04:15:21 AM |
|
Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?
AM should have all algos but developers seems to be ignorant and impertinent to the users that paid for AM. They should prove that are not if they add the missing algos and coins because it was hundreds of requests for having all algos and they do not care.
|
|
|
|
eminer001
Newbie
Offline
Activity: 140
Merit: 0
|
|
January 22, 2018, 04:23:59 AM |
|
Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?
It sounds like you didn't even try to add it yourself. Why don't you do that? Let the developer fix stuff that you can't do yourself in 5 minutes work. You are respecting us with your answer. The pint is that AM has profit managed miner that should automatically pick the best algo and coin and users do not know that phi is the most profitable coin for days. Same thing will happen next week with a new algo that is ignored by developers and users do not know about. It is the responsibility of development team to add at least the algos that are well known, but phi is the number one miner algo for weeks and AM is ignoring it and the same will happen with other algos if they are not prebuilt into profit managed miner. Developers should respect customers that paid for the product.
|
|
|
|
Alex735566
Newbie
Offline
Activity: 19
Merit: 0
|
|
January 22, 2018, 05:08:54 AM |
|
Who can suggest how you can add a coin LUX, the algorithm phi I have already added.
Who uses which settings for maximum efficiency in mining coins. Interested in the statistics section, the current or 24 hours, setting time switching algorithms 5 minute, 1 minute, 1 hour?
|
|
|
|
|