[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[btesla]

Hi there,

Is it supports Magi (XMG) Coin (it's CPU mining)?!

Thank you!

[nemzy]

ppl did some one manage to make nanopool in awesome miner? there is a worker name and pass with e-mail
can some make a screen please? or just give some examp. and same story with balance ...
And how u can add xmr cast vega just like external miner, no manage one ?!? claymore has default port 3333 and i'm not sure about xmr cast vega. may be i need to insert some in bat file?

[Chapster]

So far, my numbers are not far off from yours.
For MPH, is that number based on BTC auto-exchange or are you mining a specific coin and receive only that coin?

Thanks.

For MPH I used BTC auto-exchange.
At the end (and after allowing several days for the results to settle), MPH seems to be the one which is the most reliable in terms of the estimated profit they report.

[WCSSTORE]

Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?

I used
stratum+tcp://yiimp.eu:3737 (and 3777)
for the coin I used "unspecified x17" and then I put in my XVG wallet
 
But when starting mining it keeps saying "retry after 30 sec"

Also If I use the ccminer without awesome miner it works.

[Emkoo]

I might have stupid question but I just started with mining 

1. How do I setup my Awesome miner to show me daily/monthly profit in USD?

2. How do I setup my Awesome miner to show me my real profit (daily profit-elec.cost)?

3. How do I setup my Awesome miner soft to show me what is my balance in my coinbase wallet?

Using Antminer S9, conected to slush pool.

I'm sure that those answers are somwhere in this thread but it has over 200 pages and I can't find it. Thanks everyone!

[eminer001]

Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?

I used
stratum+tcp://yiimp.eu:3737 (and 3777)
for the coin I used "unspecified x17" and then I put in my XVG wallet
 
But when starting mining it keeps saying "retry after 30 sec"

Also If I use the ccminer without awesome miner it works.

I also think that more pools and more coins and algos should be added to AM.
There are so many users of AM that are loosing money because AM is lacking more pools and lacking especially very high profit algos like phi that is the number one mined algo on almost all pools for days and the users that bought and paid for AM are loosing money for days because AM is lacking PHI support.
check that more than 50% of the pool is on PHI now: http://yiimp.eu/site/mining   or https://www.ahashpool.com/   and they make more money than the others (on what side are you ? )

If AM will have more pools and missing algos, users that paid won't have troubles making more money, right ?

[CreamyG31337]

Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?

I used
stratum+tcp://yiimp.eu:3737 (and 3777)
for the coin I used "unspecified x17" and then I put in my XVG wallet
 
But when starting mining it keeps saying "retry after 30 sec"

Also If I use the ccminer without awesome miner it works.

I also think that more pools and more coins and algos should be added to AM.
There are so many users of AM that are loosing money because AM is lacking more pools and lacking especially very high profit algos like phi that is the number one mined algo on almost all pools for days and the users that bought and paid for AM are loosing money for days because AM is lacking PHI support.
check that more than 50% of the pool is on PHI now: http://yiimp.eu/site/mining   or https://www.ahashpool.com/   and they make more money than the others (on what side are you ? )

If AM will have more pools and missing algos, users that paid won't have troubles making more money, right ?

What's so hard about setting it up right now by yourself? In five minutes you can add the miner, add the algo, and add the coin, and get a box of kleenex to wipe away those tears.

Feature request / possible bug: You can't highlight multiple miners if they're in different groups. Ctrl/shift click doesn't work anyways.

[ruplikminer]

Hi,

I am trying to have AM mine using Claymore Dual Miner ETH+PASC with no success. Can anyone help me? It keeps mining but ONLY ETH. Not going in dual mode.

thanks!

[WCSSTORE]

Hi,

I am trying to have AM mine using Claymore Dual Miner ETH+PASC with no success. Can anyone help me? It keeps mining but ONLY ETH. Not going in dual mode.

thanks!

Did you set up 2 different pools? 1 for ETH and 1 for PASC. After that you combine both pools into a pool group. When setting up a new miner chose claymore dual, then on dual mode click eth/pasc, then choose your new pool group.

[puwaha]

I might have stupid question but I just started with mining  

1. How do I setup my Awesome miner to show me daily/monthly profit in USD?

AM shows you this on the miners tab.  Click on the Appearance tab at the top, then change the Miner view from compact list to list.  It will show you the daily and monthly profit for each rig

2. How do I setup my Awesome miner to show me my real profit (daily profit-elec.cost)?

Same thing as #1 above.  AM shows you the revenue and profit calculations on the list view.

3. How do I setup my Awesome miner soft to show me what is my balance in my coinbase wallet?

Impossible.  Your Coinbase wallet address is not a public address.  No coin explorer can see it, thus AM can't see it.  There may be a way with AM's ability to run C++ code, but you'd have to come up with the code to interface with your Coinbase API key.

I'm sure you've read this before, but you shouldn't mine to an exchange wallet, nor keep significant amounts of coin on an exchange.  You should keep your coins on your private wallet where you control the private keys.

[puwaha]

Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?

I used
stratum+tcp://yiimp.eu:3737 (and 3777)
for the coin I used "unspecified x17" and then I put in my XVG wallet
 
But when starting mining it keeps saying "retry after 30 sec"

Also If I use the ccminer without awesome miner it works.

I also think that more pools and more coins and algos should be added to AM.
There are so many users of AM that are loosing money because AM is lacking more pools and lacking especially very high profit algos like phi that is the number one mined algo on almost all pools for days and the users that bought and paid for AM are loosing money for days because AM is lacking PHI support.
check that more than 50% of the pool is on PHI now: http://yiimp.eu/site/mining   or https://www.ahashpool.com/   and they make more money than the others (on what side are you ? )

If AM will have more pools and missing algos, users that paid won't have troubles making more money, right ?

What's so hard about setting it up right now by yourself? In five minutes you can add the miner, add the algo, and add the coin, and get a box of kleenex to wipe away those tears.

Feature request / possible bug: You can't highlight multiple miners if they're in different groups. Ctrl/shift click doesn't work anyways.

To backup Creamy's point... that's the beauty of AM.  You have the ability to add these options in minutes.  Remember, mining is a competitive game, especially for new coins.  You can setup an algo, coin, pool, and miner in minutes and mine the crap out of a coin before it becomes popular.  If it was all added into the box with AM... sure it would be convenient, but thousands of other AM users would jump on that coin, crowding out your potential mining returns.

Awesome Miner is a facilitator, not a service provider.

[puwaha]

Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?

I used
stratum+tcp://yiimp.eu:3737 (and 3777)
for the coin I used "unspecified x17" and then I put in my XVG wallet
 
But when starting mining it keeps saying "retry after 30 sec"

Also If I use the ccminer without awesome miner it works.

Did you put "c=XVG" (without quotes) in the password field of your pool for yiimp.eu XVG?

For basically all yiimp style pools, you just need your coin's wallet address in the worker name field, and the c=XXX in the password field... where XXX is the coin's code you are mining.

[puwaha]

ppl did some one manage to make nanopool in awesome miner? there is a worker name and pass with e-mail
can some make a screen please? or just give some examp. and same story with balance ...
And how u can add xmr cast vega just like external miner, no manage one ?!? claymore has default port 3333 and i'm not sure about xmr cast vega. may be i need to insert some in bat file?

What are you trying to mine at nanopool?  I'm assuming it's either Monero or Electroneum since you are asking about XMR Cast Vega.

Cast XMR is built into AM, so I would try with this mining software first.  When you setup your pool information in AM for nanopool, the server URL should be:

xmr-us-east1.nanopool.org:14444

Change the "us-east1" part to your region's server URL.  See here for the other region server names:  https://xmr.nanopool.org/help

If you are mining ETN, then lookup the server and port name here:  https://etn.nanopool.org/help

The worker name that you put into the pool definition for AM is going to be different depending on what kind of wallet you are mining to.  The easiest to setup looks to be to your local wallet.  It has the format of ADDRESS.WORKER so your worker name would be your Monero or ETN address only.  On the Managed Miner is where you tick the box to append the worker name to the pool worker name.  So if your worker name in the pool definition is ABC123, and the appended worker name in the Managed Miner is RIG1 then AM will put those two together to be ABC123.RIG1 which is the format that nanopool is expecting for mining to your local wallet.

If you are mining to an exchange or a local wallet that requires the payment ID, then you append that to your wallet address in the pool definition.  So, the pool definition worker name  would look like:  ABC123.PayID  And then you still append the worker name from the Managed Miner of RIG1 so that AM will put it all together to be ABC123.PayID.RIG1

If you need to add an email address, then you put that in the Managed Miner worker name appending.  So if you had the pool definition worker name of ABC123.PayID  and then your Managed Miner worker name was RIG1/emailaddress@mail.com then AM will put that all together as ABC123.PayID.RIG1/emailaddress@mail.com

The pool password doesn't seem to matter so you can put an x.

[puwaha]

Well, my things are going from bad to worse.

This is what my AM dashboard is showing right now. Both miners are spending more time idling than working.



EDIT: Just upgraded to the latest Dev version - both, the monitoring PC as well as both remote clients on the miners. No change, still restarting both miners at the exact same time every 15-20 minutes.

Thucar, can you give us some more details as to what you are mining?  What coin, what algo, what mining software, what pool, etc?  Are you using a regular Managed Miner or a Profit Miner?  If Profit Miner, then what service(s) are you using?

If you stop your miner and right-click it and select Diagnostics, can you post that here?

[puwaha]

Hi there,

Is it supports Magi (XMG) Coin (it's CPU mining)?!

Thank you!

That coin uses the M7M algo which is not built in AM currently.  You would need to setup the algo, the coin, upload your custom mining software to your rigs, then setup the pool, and finally point your rigs to everything you just setup.

[btesla]

Hi there,

Is it supports Magi (XMG) Coin (it's CPU mining)?!

Thank you!

That coin uses the M7M algo which is not built in AM currently.  You would need to setup the algo, the coin, upload your custom mining software to your rigs, then setup the pool, and finally point your rigs to everything you just setup.

Thank you for your answer! 

[manvsrice]

Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?

[WCSSTORE]

Anyone else having a hard time adding yiimp.eu (xvg) to awesome miner?

I used
stratum+tcp://yiimp.eu:3737 (and 3777)
for the coin I used "unspecified x17" and then I put in my XVG wallet
 
But when starting mining it keeps saying "retry after 30 sec"

Also If I use the ccminer without awesome miner it works.

Did you put "c=XVG" (without quotes) in the password field of your pool for yiimp.eu XVG?

For basically all yiimp style pools, you just need your coin's wallet address in the worker name field, and the c=XXX in the password field... where XXX is the coin's code you are mining.

 THANK YOU!!!! It worked. 

[CreamyG31337]

Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?

It sounds like you didn't even try to add it yourself. Why don't you do that? Let the developer fix stuff that you can't do yourself in 5 minutes work.

[moppidoo]

Hello, is there a way to add PHI algo? Espicially the Lux coin? Could it be added in next version?

http://www.awesomeminer.com/help.aspx (Yes...be surprised Awesome Miner's official site has a comprehensive Help / FAQ page)

Contains everything you need to know about how to add custom algo/coins/pools/softwares to get LUX mining going