[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[toptek]

how do i enable ssl on ZecMiner?

that pool has to have a port for it and do it like this with that port


ssl://yourpoolsURL:theSSLport

or

stratum+tcpssl://yourpoolsURL:theSSLport

awesome miner has no switch for it when you setup the managed miner use the ssl address for that pool like above .

[narousberg]

BIG BUG in after restoring from .export file
in .export file i have more HashToCoin pools, each pool for special coin
i have restored from .export file
Pools in pools list looks OK
Next created pool group and added 6 pools from HashToCoin with different coins
added this pool group to my antminer
In miner pool list now all pools from HashToCoin have the SAME (Anoncoin) I have not added Anoncoin pool in this pool group.
This all happens after i have restored from .export file. Before all groups worked fine.
Now i cant create or recreate group. Always the same shit. Looks i must recreate each pool. But i have 100+ pools in list. BIG SHIT

Patrike please HELP

[narousberg]

looks like all saved pools got a same internal ID
I try to add only a one pool (GameCredits), but in miner pool list i get Anoncoin.

Upd: I have created new HashToCoins Pool with diferent name and other coin as Anoncoin, but if i add this new pool to miner i get old Anoncoin pool in miner pool list. WTF a this BUG Where this bug?

Upd2: i have completly deleted this Anoncoin pool from AM, added new created pool Gamecredits. And in miner pool list i see this old Anoncoin pool which i have deleted!!!!

Problem solved:

After restoring from .export file AM not set parameter for "ignore add to worker name" and "worker name separator". !!!
I have manualy set this parameters for each pool and chaos is gone!)))

[Moscut]

hi,

i am mining on awesomeminer / Alexisminer using zpool! Is there a way to check the balance how much coins i already made?

[micwebnet]

Key value of Awesome Miner is to keep the miners running, yet I'm yet to see this work with GPU miners.

Here is a common use case I run into:  

1. AwesomeMiner launches NsGpuCNMiner
2. NsGpuCNMiner hangs on start-up:

Code:

╔════════════════════════════════════════════════════════════════╗
║         Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ║
╚════════════════════════════════════════════════════════════════╝

XMR: 1 pool is specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 3
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Fiji, 4096 MB available, 64 compute units
GPU #2 recognized as Fury X/Nano
POOL version
GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)

3. Mining stops. Hashrate is blank. Miner is never restarted by AwesomeMiner. Manually restarting the miner in AwesomeMiner typically brings it back to life. Sometimes a system reboot is necessary.

Adding custom rules like if hashing average is < 600kH/s for the past 2 minutes, restart miner (typical speed is 1kH/s+) doesn't work.

What I'd like is to detect when a GPU miner is no hashing, restart it a couple of times, and if that doesn't help, reboot the system. I also want to easy the history of rule executions (when the trigger acted, what was the action, and whether it succeeded).

What am I missing?

Best,  Michael

[yhbae]

Using Hashrefinery as a backend, can I specify my LTC address instead of where it asks for BTC address to get payment in LTC? According to Hashrefinery info, this should be possible.

Thank you!

[hamo86]

the difficulty is too high these days

[johnnie18]

I would like to ask what is the minimum Video card to use for this mining? thank you

[poby]

BUG REPORT

I've found a definite bug that should be easy to fix.  When setting the worker name in a pool for nanopool, when I use the special syntax: EWALL/[MinerWorker]/EMAIL and run it, the last part of the email is cutoff.

e.g.

pool worker name:                               t1PmFMa2KBbZUrTCDnCVdLWxxxxxxxx/[MinerWorker]/xxxxxx@yyyyyy.net

Run, checking details shows the user as t1PmFMa2KBbZUrTCDnCVdLWxxxxxxxx/RIG2/xxxxxx@yyyyyy

Note the last part of the email is absent!

I hope this bug will be acknowledged and fixed in the next version.  Having special syntax for nanopool is great!  But not currently workable.

Also it would be nice if double clicking on a miner would bring up the properties.

[tf2addict]

deleted

[Triangulum]

I'm sorry if this question has been asked before. How do I set spool-specific options with sgminer? I need to specify "-p c=BTC,d=864" for zpool and I can easily do it with ccminer 2.2.2 by going to Options, Online services and add "p -c=BTC,d=864" in the Command line parameters of the zpool I want to change; however, sgminer ignores this command line parameters because it parses awesome.conf file for the password value. Is there a way to manually edit the awesome.conf file and make it permanent? Thanks in advance.

[kf9ug]

Key value of Awesome Miner is to keep the miners running, yet I'm yet to see this work with GPU miners.

Here is a common use case I run into:  

1. AwesomeMiner launches NsGpuCNMiner
2. NsGpuCNMiner hangs on start-up:

Code:

╔════════════════════════════════════════════════════════════════╗
║         Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ║
╚════════════════════════════════════════════════════════════════╝

XMR: 1 pool is specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 3
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Fiji, 4096 MB available, 64 compute units
GPU #2 recognized as Fury X/Nano
POOL version
GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)

3. Mining stops. Hashrate is blank. Miner is never restarted by AwesomeMiner. Manually restarting the miner in AwesomeMiner typically brings it back to life. Sometimes a system reboot is necessary.

Adding custom rules like if hashing average is < 600kH/s for the past 2 minutes, restart miner (typical speed is 1kH/s+) doesn't work.

What I'd like is to detect when a GPU miner is no hashing, restart it a couple of times, and if that doesn't help, reboot the system. I also want to easy the history of rule executions (when the trigger acted, what was the action, and whether it succeeded).

What am I missing?

Best,  Michael

I used the accept progress rule to automatically restart the miner if it doesn't get any accepted work by the pool within a set amount of time.  Have you tried it yet?

[toptek]

Is this program compatible with the Pangolinminer Whatsminer M3? Has anyone tried? I checked the list
on the FAQ page, and it just says most miners. Being it's a new miner on the mining scene, I haven't seen
many facts about software compatibility.  I searched through recent posts, and couldn't find anything.
I'd really like to purchase this software for when I'm away at my day job.


If not allowed I'll remove. Thanx!!!

I've received a number of requests about this miner, but no confirmations on reports on if it's working on not. If it's running cgminer software with an API, Awesome Miner will be able to monitor it.

You can use the Free Edition of Awesome Miner and simply try to connect it to this miner and give it a try.

Can you please add the latest version of DSTM Zcash Cuda Miner and Claymore CryptoNight GPU Miner version 11.0 ?
Thanks,

you can update both your self till he can add the code to allow it by using Upload custom Software under TOOLS on the main menu bar at the top of AM .

or follow this

http://www.awesomeminer.com/help/uploadsoftware.aspx

[puwaha]

I would like to ask what is the minimum Video card to use for this mining? thank you

Awesome Miner doesn't have any minimum video card requirements.  The mining software has minimum video card requirements.  Check with the mining software you want to use.

[puwaha]

hi,

i am mining on awesomeminer / Alexisminer using zpool! Is there a way to check the balance how much coins i already made?

Yes, go to zpool.ca and click on the miners option at the top of the web page.  Put in the bitcoin address that you told Awesome Miner to use and you can watch progress from zpool's side.

[puwaha]

I'm sorry if this question has been asked before. How do I set spool-specific options with sgminer? I need to specify "-p c=BTC,d=864" for zpool and I can easily do it with ccminer 2.2.2 by going to Options, Online services and add "p -c=BTC,d=864" in the Command line parameters of the zpool I want to change; however, sgminer ignores this command line parameters because it parses awesome.conf file for the password value. Is there a way to manually edit the awesome.conf file and make it permanent? Thanks in advance.

There are command line parameters you can add at the profit miner level.  Try putting them in there.

[Jan2017]

I recently started to use Awesome Miner, and indeed... it is Awesome!!!
Searching the net I could not find a clear answer for my (probably noob) question:
I have 6 AMD card running for Mining Pool, now I want to add a NVIDIA card, is it possible?
Searching in Awesome Miner I cannot find anything , it looks like you have one choose, AMD or NVIDIA and you cannot combine, but I might be overlooking something....

[vapourminer]

hey all, I'm looking for some configuration advice.


Windows 10 Pro 64
4x MSI GTX 1070 iTX
4x PNY GTX 1070 Blower (non FE)
1x Sapphire RX580 Nitro+ LE

now I want to add the RX 580 to the mix and I'm just wondering if anyone has some advice on making the nV driver and Radeon driver play nicely with each other.

there is no problem running amd and nvidia together on win10. just install both drivers.

only thing i noticed is when using DDU to clean one driver it sometimes messes with the other one too. solution is just reinstall whatever one got messed up.

[Kronny]

Hi Patrike, 3 question:
1 - Any updates about linux version?
2 - Is there any possibility to put the temp limit variable in awesome miner? would be awesome set max temp and automatic fan.



3 - I'm mining Zencash, but AM don't show me the "total per day" if i set in the pool setings Worker name: myaddress.[ComputerName]

When the miner start it show me:


But after some second it show Unspec. Equihash


It's all ok if i set in "worker name" only address and set [ComputerName] in miners properties

[tf2addict]

Key value of Awesome Miner is to keep the miners running, yet I'm yet to see this work with GPU miners.

Here is a common use case I run into:  

1. AwesomeMiner launches NsGpuCNMiner
2. NsGpuCNMiner hangs on start-up:

Code:

╔════════════════════════════════════════════════════════════════╗
║         Claymore's CryptoNote AMD GPU Miner v10.2 Beta         ║
╚════════════════════════════════════════════════════════════════╝

XMR: 1 pool is specified
Main Monero pool is us-east.cryptonight-hub.miningpoolhub.com:20596
At least 16 GB of Virtual Memory is required for multi-GPU systems
Make sure you defined GPU_MAX_ALLOC_PERCENT 100
Be careful with overclocking, use default clocks for first tests
Press "s" for current statistics, "0".."9" to turn on/off cards, "r" to reload pools
OpenCL initializing...
AMD Cards available: 3
GPU #0: Ellesmere, 8192 MB available, 36 compute units
GPU #0 recognized as Radeon RX 480/580
GPU #1: Ellesmere, 8192 MB available, 36 compute units
GPU #1 recognized as Radeon RX 480/580
GPU #2: Fiji, 4096 MB available, 64 compute units
GPU #2 recognized as Fury X/Nano
POOL version
GPU #0 algorithm ASM, -h 1800, -dmem 1 (Memory used: 7560MB)

3. Mining stops. Hashrate is blank. Miner is never restarted by AwesomeMiner. Manually restarting the miner in AwesomeMiner typically brings it back to life. Sometimes a system reboot is necessary.

Adding custom rules like if hashing average is < 600kH/s for the past 2 minutes, restart miner (typical speed is 1kH/s+) doesn't work.

What I'd like is to detect when a GPU miner is no hashing, restart it a couple of times, and if that doesn't help, reboot the system. I also want to easy the history of rule executions (when the trigger acted, what was the action, and whether it succeeded).

What am I missing?

Best,  Michael

I used the accept progress rule to automatically restart the miner if it doesn't get any accepted work by the pool within a set amount of time.  Have you tried it yet?

Do you use a trigger like this:

Accepted (5 minutes ago) Equals 0