patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
March 12, 2018, 01:07:11 PM |
|
ALL Online service Algo keccakc calutate profit wong
If you add a custom algorithm not included in Awesome Miner, you may also need to adjust the profit factor when you add it as an online service. Awesome Miner doesn't know if the unit of reporting is MH/s or GH/s for example, as the pool API's doesn't include this information. Please go to Options dialog, Online Services and edit the entries and set profit factor to either 0.001 or 1000 depending on how you need to adjust it.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
March 12, 2018, 01:11:00 PM |
|
Patrike,
Is there a way to change all the zerg names? they have changed their name to mine too per their webpage and all of them need to be updated.
Awesome Miner should already be using mine.zergpool.com. In the new development release I will also include a Region setting for US/EU for zergpool. Are there any other changes required?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
March 12, 2018, 01:11:56 PM |
|
Hello everyone,
is there a way to create a notification when the fan speed of a gpu is greater that a certain value ?
It seems that there is a way to create a rule when the fan speed is lower than a certain value, and but no way to create a trigger based on a "greater than" value for the fan speed. It's unfortunate, because for me, it is at least as important as "lower than".
Is that a future feature ?
Thanks for your feedback. I've noted your request.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
March 12, 2018, 01:13:53 PM |
|
Hi, I have several external miners connected through VPN. Awesome miner works perfectly with L3+, but with S9 every couple of minutes it shows disconnected status (and then connected again). I switched on option "ping up external miners", so it also shows "pinging up" status as well. It all looks like christmas tree (it connects and disconnects every 2 minutes), and because of all that permanent disconnections I can't make some rules work. Is there a solution how to work it out? I guess if awesomeminer has that option "ping up external miners" it could be kind of typical situation. Thanks
Hi, By default Awesome Miner will only wait for 3 seconds for the ASIC miner to respond to the monitoring requests. Depending on network connectivity and other factors, you may have to increase this to not get "Disconnected" too often. Please go to the Options dialog, Advanced section, and increase the "Miner API connection timeout".
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
patrike (OP)
Legendary
Offline
Activity: 3472
Merit: 1095
|
|
March 12, 2018, 02:00:30 PM |
|
Awesome Miner Version 4.5.2 (Development preview of 4.6)- Custom Online Services can be added to support any Yiimp compatible pools - Remote Proxy concept introduced to support very large scale mining operations - The Change Pool and Add Pool menus are redesigned to include a searchable pool selection dialog, to support a larger number of pools. - The Add Pool operation is added to the main toolbar and can be performed on all selected External Miners - Improved batch command execution to allow execution when a miner is starting or stopping, for both Managed Miners and per algorithm for Profit Profiles- Improved context menus and change detection for the Pool Balance feature - Number of active miners at Yiimp compatible pools displayed in the Online Services tab - Indonesian Rupiah added as display currency - Updates to Mining Dutch port numbers to avoid low difficulty ports by default - Zergpool settings for the profit switcher has been updated to include selection of region (EU or US) - Claymore Dual Ethereum Miner 11.3- PhoenixMiner 2.7c - XMRig miner 2.4.5 - Correction to benchmarking of Excavator miner - Correction to Ignore GPU feature for the MSI Afterburner integration- Correction to display of pool balance where the coin is unknown - Correction to profit switcher for disabled algorithms and custom pools- Minor corrections Items in blue are new since the previous development release a few days ago. Development versions are intended for users that want to try the latest features before they are made available in the official releases. Development versions are not intended to be deployed at large scale as they have not been tested as much as the official releases. Please make sure that both Awesome Miner and Remote Agent uses the save version. Also note that one upgraded to a development preview, it isn't possible to downgrade to an older version. To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates Direct download links if needed: http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msihttp://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
ArcticUK
Newbie
Offline
Activity: 36
Merit: 0
|
|
March 12, 2018, 05:15:03 PM |
|
Hi,
Is there a way to activate a saved MSI Afterburner profile when mining a particular coin/algorithm? I know I can set power, mem and clock settings from AM but the Voltage tweaked profiles would be so much better.
Thanks
|
|
|
|
MinLum
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 12, 2018, 08:59:31 PM |
|
I'm trying to find a way to get AM to only mine using 3 out of 6 GPUs? I'm hoping to run some tests with GPUs 1-3 running on NH and GPUs 4-6 running AM. Is this possible on the free edition of AM? If not, which paid version supports this?
Thanks!
|
|
|
|
akadamson
Member
Offline
Activity: 140
Merit: 18
|
|
March 12, 2018, 09:35:21 PM |
|
I'm trying to find a way to get AM to only mine using 3 out of 6 GPUs? I'm hoping to run some tests with GPUs 1-3 running on NH and GPUs 4-6 running AM. Is this possible on the free edition of AM? If not, which paid version supports this?
Thanks!
depends on the miner, but just create 2 miners and add the command line option to use x,y,z cards on one miner and 1,2,3 on the other There may be a more elegant way to do it as well, but the above should work I think
|
|
|
|
MinLum
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 12, 2018, 11:28:51 PM |
|
depends on the miner, but just create 2 miners and add the command line option to use x,y,z cards on one miner and 1,2,3 on the other
There may be a more elegant way to do it as well, but the above should work I think
Not sure how to implement your suggestion on AM, really. In NiceHash, I expect to just un-tick the GPUs and they will not be used, but I cannot find how to do the same in AM
|
|
|
|
somaton
Jr. Member
Offline
Activity: 211
Merit: 6
|
|
March 13, 2018, 01:32:43 AM |
|
i have 3 nvidia rigs, all of them had AM 4.5. Updated 2 of them to 4.5.2 to test this new version. In both rigs with 4.5.2 it is not possible to edit location of miner .exe, because Configure button is disabled. It is there: Profit profiles -> nVidia GPU -> Edit, select any miner software on left and you can see grayed out "Configure..." button. Once 4.5.2 just crashed when i was benchmarking Excavator (Latest).
|
|
|
|
kitenski
Newbie
Offline
Activity: 21
Merit: 0
|
|
March 13, 2018, 07:45:23 AM |
|
Can anyone suggest why a rig with a single 1050 is seemingly performing better than a rig with a 1060 & 1050 in it? In the pic below Garage has the single 1050 and Dell has the dual GPUs but is giving less revenue! https://i.imgur.com/jme13Ds.jpg
|
|
|
|
soothaa
|
|
March 13, 2018, 01:24:54 PM |
|
AwesomeMiner Coin Updater 0.5 ( Requires AwesomeMiner 4.5 Release) - Added support for Graviex Exchange
- Added support for cryptohub.online Exchange
- Fixed an issue with changes from Stocks.Exchange (or tradesatoshi.. can't remember)
- General improvements/clarifications in the console
https://bitcointalk.org/index.php?topic=2979494.0
|
|
|
|
spinlock
Newbie
Offline
Activity: 3
Merit: 0
|
|
March 13, 2018, 02:22:05 PM |
|
Hi folks,
I hope this is the right place to ask this question, so if not, I would appreciate any direction.
I bought a Premium license for AwesomeMiner yesterday. I used Options | Registration to enter my email and the key I received via email. I clicked the Verify button, and all looked fine.
But when I go to Options | Web, I CANNOT enable the API - it's greyed out and inactive. I've restarted AM, rebooted, no luck.
I bought the premium licenses specifically for API access, so this is a major issue for me. Any help would be greatly appreciated!
Thanks,
ws
|
|
|
|
Nexillus
|
|
March 13, 2018, 02:39:47 PM |
|
So a question I have that someone maybe able to help on.
Recently, I have had two rigs where the ZEC process just freezes and crashes. Awesome miner does not kill the process or restart it. I have to manually close it and then Awesome Miner restarts the process.
Thank you for the help!
|
|
|
|
MinLum
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 13, 2018, 04:13:21 PM |
|
I need to add the dev=0,1,2 option to the DSTM miner in AM but I have tried with no success to get AM to pass this option forward. I've even tried going into the actual miner folder (C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win)and edit the zm.cfg file but it is ignored when AM starts up the DSTM miner. Any help appreciated!
|
|
|
|
Nexillus
|
|
March 13, 2018, 04:53:49 PM |
|
I need to add the dev=0,1,2 option to the DSTM miner in AM but I have tried with no success to get AM to pass this option forward. I've even tried going into the actual miner folder (C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win)and edit the zm.cfg file but it is ignored when AM starts up the DSTM miner. Any help appreciated!
I believe you can pass custom command arguments to the miner via the options within each miner on AM. I can verify the exact location once I am home.
|
|
|
|
Nexillus
|
|
March 13, 2018, 05:26:40 PM |
|
Recently, I have had two rigs where the ZEC process just freezes and crashes. Awesome miner does not kill the process or restart it. I have to manually close it and then Awesome Miner restarts the process.
If it crashes and AM Remote doesn't see it, maybe it's because your miner is started using a start /B command for example? Or maybe there is a windows message like "This program doesn't run anymore" (don't know the message in english) and this window doesn't allow AMR to kill it. This window can be set up not to appear in Group Strategy. Otherwise I've kind the same problem - I use Generic Miner, no API, sometimes it doesn't crash but produces 0 solution :-( Which is why (for you and for me) this solution I proposed would help: https://bitcointalk.org/index.php?topic=676942.msg32059884#msg32059884Didn't even think of the little pop up box! I will look into disabling it in the group strategy. That is what is likely causing it not to be able to be closed from AM. The rules/trigger is quite comprehensive, especially when combined with custom scripts in batch or C# but didn't think of the window. Thank you so much!
|
|
|
|
MinLum
Newbie
Offline
Activity: 34
Merit: 0
|
|
March 13, 2018, 05:50:48 PM |
|
I need to add the dev=0,1,2 option to the DSTM miner in AM but I have tried with no success to get AM to pass this option forward. I've even tried going into the actual miner folder (C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win)and edit the zm.cfg file but it is ignored when AM starts up the DSTM miner. Any help appreciated!
I believe you can pass custom command arguments to the miner via the options within each miner on AM. I can verify the exact location once I am home. Please confirm how to do this, I look forward to it. I've tried in all places I could think of: I've tried Options > Pools > Equihash MPH pool (port 17023) > Advanced and added pool specific command line parameters I've tried Options > Profit Profiels > Custom Profile > DSTM Zcash Cuda Miner > Configure and added command line parameters to mining software I've tried right-click on miner > Properties > Command Line and added parameters to mining software I've tried going to C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win and editing the zm.cfg file Nothing works and it looks like the .cfg file is ignored when AM starts up the miner or AM injects it's own commands and thus ignores the .cfg file.
|
|
|
|
Nexillus
|
|
March 13, 2018, 06:20:12 PM |
|
Didn't even think of the little pop up box! I will look into disabling it in the group strategy. That is what is likely causing it not to be able to be closed from AM. The rules/trigger is quite comprehensive, especially when combined with custom scripts in batch or C# but didn't think of the window. Thank you so much!
(I don't have the exact translation, it's not in english here) It's in group strategy: administration models, windows error reports, do not display the user interface for critical errors... set it to ENABLED For Win7 I think it's all. For Win10 there is another one at the same place. If you can't find it I'll do. I have found where to do it, once I get home I will apply this. Thank you!
|
|
|
|
Nexillus
|
|
March 13, 2018, 06:21:12 PM |
|
I need to add the dev=0,1,2 option to the DSTM miner in AM but I have tried with no success to get AM to pass this option forward. I've even tried going into the actual miner folder (C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win)and edit the zm.cfg file but it is ignored when AM starts up the DSTM miner. Any help appreciated!
I believe you can pass custom command arguments to the miner via the options within each miner on AM. I can verify the exact location once I am home. Please confirm how to do this, I look forward to it. I've tried in all places I could think of: I've tried Options > Pools > Equihash MPH pool (port 17023) > Advanced and added pool specific command line parameters I've tried Options > Profit Profiels > Custom Profile > DSTM Zcash Cuda Miner > Configure and added command line parameters to mining software I've tried right-click on miner > Properties > Command Line and added parameters to mining software I've tried going to C:\Users\[user]\AppData\Local\AwesomeMiner\zm_0.6_win_2\zm_0.6_win and editing the zm.cfg file Nothing works and it looks like the .cfg file is ignored when AM starts up the miner or AM injects it's own commands and thus ignores the .cfg file. Are you only looking to pass the dev=0,1,2 command through AM to DSTM miner? (I will be home in about an hour and will get back with you) Also AM can individually enable/disable GPU's as well if that is the objective you are trying to do.
|
|
|
|
|