[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[edonaldson]

I just installed version 5.2, and now everytime it starts up, it crashes.  No warning.  Just "goes away".  Help!

[patrike]

I just installed version 5.2, and now everytime it starts up, it crashes.  No warning.  Just "goes away".  Help!

Please upgrade to version 5.2.1. There was a specific scenario related to the profit switcher (mainly the one used for ASIC miners) in the recent 5.2 update, that could cause this issue. Sorry for any inconvenince.

You can also upgrade by downloading and running the latest installer from the web site:
http://www.awesomeminer.com/download.aspx

[edonaldson]

I just installed version 5.2, and now everytime it starts up, it crashes.  No warning.  Just "goes away".  Help!

Please upgrade to version 5.2.1. There was a specific scenario related to the profit switcher (mainly the one used for ASIC miners) in the recent 5.2 update, that could cause this issue. Sorry for any inconvenince.

You can also upgrade by downloading and running the latest installer from the web site:
http://www.awesomeminer.com/download.aspx

Works.  Thank you!

[trucobit]

Hello patrike, your solution works perfectly. It is even simpler, you just have to make an extra profile for each rig, just for the Clock, and the Rig to follow an extra profile only with the HASH, and with this you mount the groups you select them in each rig and everything PERFECT .

I have also created a rule that if the total of all the cards does not exceed X of estimated daily benefits, it does autoswich and all the rigs change.

Thanks for thinking about the problem, for giving me a somewhat complex solution but a real solution, waiting for a better implementation.

Thank you very much for wasting your time explaining a real solution.

[cost82el]

antminer z9 mini supported?

[trucobit]

I have a Patrike question, it's not a request or suggestion.

In the help you say that to use Aftherburner server, in the rig you have to deactivate if you have the options to modify the Voltage. I have done that as indicated by the help.

I have the need to reduce the core voltage. That's not TPD, it's not the same, I really need to reduce the voltage a bit to make undervolt and control the temperatures of the 5 rigs inside the ventilated cabinet.

My question is. If I manually, I go to each rig and activate the voltage control and reduce the voltage a little. Is there any interference with aftherburner server or awesome ?. I guess when Awesome tells you to change TDP, CORE or MEM, it would not cause the voltage change. or if?

I suppose you can tell me before I waste my time. Thank you in advance for your response and patience.

In the end, I think that everything I ask and ask is useful information left in the forum for newcomers. I do not know if he believed me, but I read all the pages of this post.

[rudefyet]

Skunk is the only algo showing in the benchmark dialog with z-enemy enabled. Shows supported algos all enabled/default in the managed software settings.

[danielocdh]

I just upgraded to 5.2.1, I can't benchmark the new Cryptonight variants (they are enabled on general options and profit profile), is that normal? do I need to do something else?

[Bob-Bit]

I just upgraded to 5.2.1, I can't benchmark the new Cryptonight variants (they are enabled on general options and profit profile), is that normal? do I need to do something else?

You'll only be able to benchmark them if there's a pool for those coins available in your list. Many of those coins/algos don't have a pool on the default profit switching pools. Good luck to you!

[soothaa]

What is this "Equihash Zero" algo that has been added? I cannot find any info on it.

[Philopolymath]

How can I DOWNGRADE
I just upgraded to 5.2.1 BUT NOW have no temp readings on any of my Dragonmints! B52's & B29's
they also don't report the profit/day correctly anymore

[nadeaup]

How can I DOWNGRADE
I just upgraded to 5.2.1 BUT NOW have no temp readings on any of my Dragonmints! B52's & B29's
they also don't report the profit/day correctly anymore

They are aware, and said they will fix it.

[patrike]

antminer z9 mini supported?

Awesome Miner supports all Antminers so far, as they are quite similar from a monitoring point of view. Antminer Z9 mini will be supported as well, but it cannot be confirmed until someone receive the first shipment and add it to Awesome Miner.

[patrike]

Hello patrike, your solution works perfectly. It is even simpler, you just have to make an extra profile for each rig, just for the Clock, and the Rig to follow an extra profile only with the HASH, and with this you mount the groups you select them in each rig and everything PERFECT .

I have also created a rule that if the total of all the cards does not exceed X of estimated daily benefits, it does autoswich and all the rigs change.

Thanks for thinking about the problem, for giving me a somewhat complex solution but a real solution, waiting for a better implementation.

Thank you very much for wasting your time explaining a real solution.

Thanks for the update. Great that you found a solution that is OK.

[patrike]

Skunk is the only algo showing in the benchmark dialog with z-enemy enabled. Shows supported algos all enabled/default in the managed software settings.

This is similar to what Bob-Bit answered to another question, and it's related to that you need a pool for the benchmarking.

While ccminer can benchmark algorithms without a pool, in "offline" mode, that's not supported for Z-enemy. Instead you need to go to the Options dialog, Profit switching section and make sure you enable some pools so the benchmark feature have something to work with. Can you please check if this resolves you question? Thanks!

[patrike]

I have a Patrike question, it's not a request or suggestion.

In the help you say that to use Aftherburner server, in the rig you have to deactivate if you have the options to modify the Voltage. I have done that as indicated by the help.

I have the need to reduce the core voltage. That's not TPD, it's not the same, I really need to reduce the voltage a bit to make undervolt and control the temperatures of the 5 rigs inside the ventilated cabinet.

My question is. If I manually, I go to each rig and activate the voltage control and reduce the voltage a little. Is there any interference with aftherburner server or awesome ?. I guess when Awesome tells you to change TDP, CORE or MEM, it would not cause the voltage change. or if?

I suppose you can tell me before I waste my time. Thank you in advance for your response and patience.

In the end, I think that everything I ask and ask is useful information left in the forum for newcomers. I do not know if he believed me, but I read all the pages of this post.

Awesome Miner will send commands to MSI Afterburner to apply those settings you specified. It will not override any other settings you might have made in Afterburner, only those specifically you see in Awesome Miner. So I think it should be fine in this scenario.

[patrike]

What is this "Equihash Zero" algo that has been added? I cannot find any info on it.

Hi,
The new EWBF Equihash miner supports Equihash Zero (also called Equihash 192,7)
https://bitcointalk.org/index.php?topic=4466962.0

The coin Zero (ZER) is based on this algorithm:
https://whattomine.com/coins/210-zer-equihashzero

[patrike]

How can I DOWNGRADE
I just upgraded to 5.2.1 BUT NOW have no temp readings on any of my Dragonmints! B52's & B29's
they also don't report the profit/day correctly anymore

They are aware, and said they will fix it.

There will very soon be a 5.2.2 release to correct this.

What's difficult with some specific Dragonmint and Innosilicon miners is that they provide very little information about what kind of miner it is. An Antminer is presenting itself as "Antminer L3" for example, making it very easy for Awesome Miner to know that for this specific miner, the ASIC is reporting the hashrate with a factor 1000 times too high and can adjust that.

There are a number of Antminers and a few Innosilicon miners that reports hashrate with other units than they say. This is also the reason why when you plugin a brand new Antminer model, it might show up with a hashrate 1000 times too high, or 1,000,000 times too high. It's simply because this is what the miner is reporting. Then Awesome Miner needs to detect the model and make the adjustments to show a hashrate that is correct.

Unfortunately there was a case in 5.2 where the detection of Innosilicon A9Z (that doesn't say anything in the response that indicates that it's this miner) that also matched with two Dragonmint miners. I've made a change for that in 5.2.2 - sorry for the inconvenience.

[patrike]

Awesome Miner version 5.2.2

- CastXMR 1.2.5 with Cryptonight-Fast support
- BMiner 9.0
- Correction to profit switcher for the scenario where Bminer is used and both Equihash and Ethereum is enabled
- Correction to hash rate unit adjustments for a few Dragonmint based ASIC miners
- Correction to Mining Dutch pool profit factor
- Minor corrections

[Philopolymath]

well shit that was a fast fix...thank you
you are obviously NOT a politician or federal employee.