[Awesome Miner] - Powerful Windows GUI to manage and monitor up to 200000 miners

[patrike]

the problem is that AM always shows 0.00 profit/revenue for any miner that switches to any of the Zergpool stratums

I have the same problem on my side

Awesome Miner had some code for zergpool left since before so the profit calculations will indicate zero even when adding it manually.

I'm just about to release a new version of Awesome Miner where Zergpool is available again via the Options dialog, Profit Switching section.

[1714813909]

1714813909

[1714813909]

1714813909

[1714813909]

1714813909

[1714813909]

1714813909

[1714813909]

1714813909

[1714813909]

1714813909

[patrike]

Thank you as always for responding and being so active in the maintenance of your program.

I do not use the volume filter, the currency appears in bold letters, that is correct, but then when mining it, it simply does not tell me the profit or currency days. Other coins with the same miner there are no problems. IF the truth is something strange.

Hopefully in the next version is solved.

I take advantage of another small mistake. The selection of exchange, is the best function that has added in the last months, but sometimes it is not correct, I explain.

It usually works fine, but there are times, there are coins that indicate another exchange where they are, and I have the exchange activated in the list that you put, but when choosing another for example Cryptobridge, it remains gray and no longer Minaria, do not get the data from Cryptobridge, this is just an example. It is as if the data acquired by the Coinscalculator or coinstomine apis were wrong, or the array of the exchange had some failure. Very little happened, but it happens to me.

You do a great job, I'm impressed with how committed you are to your project, and I want you to know that I recommend it to everyone in my telegram group. The bad thing that then it's my turn to explain all things to them, but that does not matter to me. Today I think that if you take the cryptos seriously, you have to use this tool in a mandatory way.

Thanks for the great feedback!

As for the exchange filtering issue, have you tried to hit the Refresh button on the Coins tab to make sure all is up to date? Next time you see this issue, please let me know the coin and exchanges and I will compare with the API output from the statistics providers.

If you want you can also investigate the API output from the statistics providers. They provide all the details that Awesome Miner uses. See the following API data links for example, where you can search for a coin name to see all reported details:
https://www.coincalculators.io/api/allcoins.aspx?hashrate=100000000
https://www.whattomine.com/coins.json
https://api.cointomine.today/api/v1/data?apikey=YOURKEY

[patrike]

Awesome Miner version 6.1.2

 ASIC mining
  - Support for AsicFW (custom firmware for Antminers) including display of Antminer power usage when running this firmware
 GPU mining
  - Added additional profit calculation details to the View Details dialog, Profit switching tab, where a double click on a calculation will show more details.
 API
  - Added total profit and power usage information to the summary API (/api/summary)
 Integration
  - Zergpool is back and supported by the profit switcher
  - Support wallet balance via the block explorer CoinExplorer.net
  - Register awesomeminer:// as URL handler to support easier pool setup
 Mining software
  - BMiner 12.1, including support for CuckaRoo29 (Grin)
  - SrbMiner updated with support for the StelliteV8 algorithm
 Corrections
  - No algorithms were listed as supported for NBMiner, preventing it from being used by the profit switcher
  - Correction to the Managed Profit Switcher when one of the custom pools are miningrigrentals.com

[patrike]

patrike

New and update ICONS for CTM
https://yadi.sk/d/_2ZrfhxI3WoaXx

Many thanks for sharing. These will be included in the next update (6.1.3).

[stolarzz]

How to add rig name for Grin?
When i use "add to worker name" Bminer is not working.

[baf28]

Awesome Miner version 6.1.2
  - Register awesomeminer:// as URL handler to support easier pool setup

What does it mean? Please describe in more detail. Thank.

[trucobit]

Thank you as always for responding and being so active in the maintenance of your program.

I do not use the volume filter, the currency appears in bold letters, that is correct, but then when mining it, it simply does not tell me the profit or currency days. Other coins with the same miner there are no problems. IF the truth is something strange.

Hopefully in the next version is solved.

I take advantage of another small mistake. The selection of exchange, is the best function that has added in the last months, but sometimes it is not correct, I explain.

It usually works fine, but there are times, there are coins that indicate another exchange where they are, and I have the exchange activated in the list that you put, but when choosing another for example Cryptobridge, it remains gray and no longer Minaria, do not get the data from Cryptobridge, this is just an example. It is as if the data acquired by the Coinscalculator or coinstomine apis were wrong, or the array of the exchange had some failure. Very little happened, but it happens to me.

You do a great job, I'm impressed with how committed you are to your project, and I want you to know that I recommend it to everyone in my telegram group. The bad thing that then it's my turn to explain all things to them, but that does not matter to me. Today I think that if you take the cryptos seriously, you have to use this tool in a mandatory way.

Thanks for the great feedback!

As for the exchange filtering issue, have you tried to hit the Refresh button on the Coins tab to make sure all is up to date? Next time you see this issue, please let me know the coin and exchanges and I will compare with the API output from the statistics providers.

If you want you can also investigate the API output from the statistics providers. They provide all the details that Awesome Miner uses. See the following API data links for example, where you can search for a coin name to see all reported details:
https://www.coincalculators.io/api/allcoins.aspx?hashrate=100000000
https://www.whattomine.com/coins.json
https://api.cointomine.today/api/v1/data?apikey=YOURKEY

I always give the button to update coins after changing the exchange, it is just when it turns gray afterwards. It does not happen in all the currencies, only in some, and yes, I suppose somehow they will not give the info well the apis

I will try to look at the apis to see what happens

[trucobit]

This is the other failure that I commented to you, that in some currency, in this case XSG, in console gives information of the hash, but then the miner does not give me neither profit, nor coins per day or anything. It is clearly seen in the capture.

[trucobit]

This is another great doubt that I have. There two denarius

Denarius (D)
denarius dnr
both tribes, both very similar price, but each one gives me a different aggregator. I do not know if it's a problem with coin aggregators, but I guess only 1 will be correct. I read the ANN but it is not clear to me ..

Which of the two is correct?

[joseph32]

Hi Patrike,

since AM can show the wattage of all NVidia and AMD GPUs (which is a great feature, thanks!), can you please add a rule to check the wattage?

Especially for AMD rigs it can happen that the damn Crimson/Radeon driver switch from the own optimized settings to some standard settings with insane power draws. To catch that it would be nice to have a wattage-rule.

[sxemini]

Hi Patrike,

since AM can show the wattage of all NVidia and AMD GPUs (which is a great feature, thanks!), can you please add a rule to check the wattage?

Especially for AMD rigs it can happen that the damn Crimson/Radeon driver switch from the own optimized settings to some standard settings with insane power draws. To catch that it would be nice to have a wattage-rule.

Downclock your cards. You clocked to high and the AMD driver reset the settings after a driver failure. This is not a problem from AMD 

[joseph32]

Hi Patrike,

since AM can show the wattage of all NVidia and AMD GPUs (which is a great feature, thanks!), can you please add a rule to check the wattage?

Especially for AMD rigs it can happen that the damn Crimson/Radeon driver switch from the own optimized settings to some standard settings with insane power draws. To catch that it would be nice to have a wattage-rule.

Downclock your cards. You clocked to high and the AMD driver reset the settings after a driver failure. This is not a problem from AMD 

Maybe, but mostly wrong. It is from switching between multiple miners and happens rarely. In case of AMD mostly if you use the buggy WildRig on Vegas which can crash the driver after stopping. But thats a problem of that miners, nothing for this thread. But it would be awesome when AM can have rules to catch the scenario of getting a too high wattage.

[cryptochristo]

yes, since the upgrade it appears to be broken for some reason

[patrike]

6.1.2 AM-Anybody else having trouble with statistics, coins all blank values? Tried multiple variations of providers, one at a time and all checked and nothing is updating. Every once in a while it will come back
with some values but very seldom. Was working perfectly one version previous.

yes, since the upgrade it appears to be broken for some reason

The latest version was made available about 16 hours ago, but about 4-5 hours ago (about the same time you posted here) I got a number of e-mail messages about this issue and I was getting the impression that not everyone was on the latest Awesome Miner version either.

I wonder if the BTC exchange rate via Coinbase was zero.

I cannot see this issue right now. Please let me know if you still have this issue? If you do, please go to the Options dialog, Statistics provider and change from Coinbase to Bitstamp to see if that changes anything.

[patrike]

How to add rig name for Grin?
When i use "add to worker name" Bminer is not working.

Is the issue that Awesome Miner launches Bminer with invalid parameters or that the information is missing? Can you please use the Diagnostics button in Awesome Miner and share command line arguments used for Bminer? Thanks!

[_SPARTANEC_]

6.1.2 AM-Anybody else having trouble with statistics, coins all blank values? Tried multiple variations of providers, one at a time and all checked and nothing is updating. Every once in a while it will come back
with some values but very seldom. Was working perfectly one version previous.

yes, since the upgrade it appears to be broken for some reason

The latest version was made available about 16 hours ago, but about 4-5 hours ago (about the same time you posted here) I got a number of e-mail messages about this issue and I was getting the impression that not everyone was on the latest Awesome Miner version either.

I wonder if the BTC exchange rate via Coinbase was zero.

I cannot see this issue right now. Please let me know if you still have this issue? If you do, please go to the Options dialog, Statistics provider and change from Coinbase to Bitstamp to see if that changes anything.

I Have the same problem. Then I get update, all miners switch to nicehash, and on coins pannel I can,t see any coins. I go to statistic providers and disable echange filter. Then i can see coins, but not all. For example I have no ZCOIN any more. Coinbase to Bitstamp have no effect.
Now I enabled cointomine.today and can see Zcoin and Verge (x17).

[patrike]

Awesome Miner version 6.1.2
  - Register awesomeminer:// as URL handler to support easier pool setup

What does it mean? Please describe in more detail. Thank.

This one is intended for pool operators to make it possible for them to put a link on their web sites that automatically configures their pools in Awesome Miner.

There will be two parts of it, one for the profit switcher (zpool, mph, zergpool, ...) and one for single coin pools (nanopool, suprnova, mph single coin pools). Right now it's only the profit switcher part that is done.

The profit switching part is the only part completed so far. If someone put a link like this on a web page, it will automatically trigger Awesome Miner to setup Zpool for example:
awesomeminer://pools/profitswitching/zpool

You can copy the link above and try it yourself by entering it in the Run dialog in Windows.

If you already have Awesome Miner with profit switching configured, it will only ask you for the wallet to use for Zpool and then enable it for the profit switcher.

If you just installed Awesome Miner and don't have any configuration at all, you will also only be asked to enter your wallet for Zpool. Then Awesome Miner will detect if you run AMD or nVidia and create a Managed Profit Miner for mining on the local computer with either the AMD or nVidia profile. This makes it much easier to get started with Awesome Miner as the entire process is:

1) Install Awesome Miner
2) Click on a link that I would like the pool operators to put on their web site
3) The link launches Awesome Miner where you enter your wallet in a dialog where the wallet is the only information you can enter
4) A Managed Profit Miner is created and you just have to press the Start button to start mining.

The plan is to have a similar concept for single coin pools and this is in the development pipeline right now. Awesome Miner will have predefined entries for a few of the most popular pools and also an option where any pool operator could define a similar template for Awesome Miner. When you click on a link Awesome Miner will show a dialog where you can select to add one or many of the coins the pool has, for example, Ethereum, ZCash and so on. After selecting you will be prompted for the information that this specific pool requires, for example a username or a wallet address. This should make it much easier to add pools and reduce the complexity of knowing when a username and when a wallet should be entered.

[patrike]

6.1.2 AM-Anybody else having trouble with statistics, coins all blank values? Tried multiple variations of providers, one at a time and all checked and nothing is updating. Every once in a while it will come back
with some values but very seldom. Was working perfectly one version previous.

yes, since the upgrade it appears to be broken for some reason

The latest version was made available about 16 hours ago, but about 4-5 hours ago (about the same time you posted here) I got a number of e-mail messages about this issue and I was getting the impression that not everyone was on the latest Awesome Miner version either.

I wonder if the BTC exchange rate via Coinbase was zero.

I cannot see this issue right now. Please let me know if you still have this issue? If you do, please go to the Options dialog, Statistics provider and change from Coinbase to Bitstamp to see if that changes anything.

I Have the same problem. Then I get update, all miners switch to nicehash, and on coins pannel I can,t see any coins. I go to statistic providers and disable echange filter. Then i can see coins, but not all. For example I have no ZCOIN any more. Coinbase to Bitstamp have no effect

I just noticed that https://www.coincalculators.io/ is offline, which can explain at least a number of these issues.

[patrike]

This is the other failure that I commented to you, that in some currency, in this case XSG, in console gives information of the hash, but then the miner does not give me neither profit, nor coins per day or anything. It is clearly seen in the capture.

Can you try the new troubleshooting feature where you right click on the miner and select View Details, and then in the profit switching tab you double-click on the line saying XSG?

[patrike]

This is another great doubt that I have. There two denarius

Denarius (D)
denarius dnr
both tribes, both very similar price, but each one gives me a different aggregator. I do not know if it's a problem with coin aggregators, but I guess only 1 will be correct. I read the ANN but it is not clear to me ..

Which of the two is correct?

After some googling I found out that Denarius used to be called DNR, but it has now changed to D. WhatToMine is correct here.