rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 02, 2015, 10:55:40 PM |
|
Bob, go on back and beg to be a tester. Especially since you are expertly teaching people to use this one that you say stinks so much!
you should know better than to feed the trolls, it only encourages them.
|
|
|
|
|
|
|
TalkImg was created especially for hosting images on bitcointalk.org: try it next time you want to post an image
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
|
|
kb4scv
Legendary
Offline
Activity: 966
Merit: 1000
|
|
August 02, 2015, 11:13:52 PM |
|
Nah, laughing at him. He comes here and trashes QTL, then goes to Circ and tells them he is an expert with QTL and is teaching people how to use it.
Too funny, actually.
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 03, 2015, 12:16:29 AM |
|
Nah, laughing at him. He comes here and trashes QTL, then goes to Circ and tells them he is an expert with QTL and is teaching people how to use it.
Too funny, actually.
Thats what you meant by "teaching people". Wow, that is one of the most insane things I have heard today, thanks for that
|
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 03, 2015, 04:10:22 AM |
|
|
|
|
|
kb4scv
Legendary
Offline
Activity: 966
Merit: 1000
|
|
August 03, 2015, 10:43:37 PM |
|
Didn't hurt me one bit!
|
|
|
|
pakmin
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 04, 2015, 03:33:03 PM Last edit: August 04, 2015, 04:07:34 PM by pakmin |
|
Hello,
I have started to use arbitrage with quatloo. It works Ok if i set 0% in "Minimum percentage in price diference", but if i change it to 0.1% or 1% it doesn't work. Some pairs appears with 2% of arbitrage possibility, but nothing appears in " Successful Arbitrage" box.
Could you help me?
Thks
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 04, 2015, 04:46:32 PM |
|
Hello,
I have started to use arbitrage with quatloo. It works Ok if i set 0% in "Minimum percentage in price diference", but if i change it to 0.1% or 1% it doesn't work. Some pairs appears with 2% of arbitrage possibility, but nothing appears in " Successful Arbitrage" box.
Could you help me?
Thks
A couple of things to keep in mind. First, I wouldn't set the min difference % anywhere below 0.45, that is the fee you will pay between bittrex/polo. Second, you can only have a successful trade if a few things are in alignment, the trade size needs to be above 50ksats, you need to have enough funds in both btc and the coin you are trading at BOTH exchanges for the trade to go through. This bot doesn't move funds around for you, yet. What coins are you trying to trade and how much of each coin and btc do you have in your exchange accounts, also, what exchanges are you trying to arb?
|
|
|
|
pakmin
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 04, 2015, 04:56:36 PM |
|
Hello,
I have started to use arbitrage with quatloo. It works Ok if i set 0% in "Minimum percentage in price diference", but if i change it to 0.1% or 1% it doesn't work. Some pairs appears with 2% of arbitrage possibility, but nothing appears in " Successful Arbitrage" box.
Could you help me?
Thks
A couple of things to keep in mind. First, I wouldn't set the min difference % anywhere below 0.45, that is the fee you will pay between bittrex/polo. Second, you can only have a successful trade if a few things are in alignment, the trade size needs to be above 50ksats, you need to have enough funds in both btc and the coin you are trading at BOTH exchanges for the trade to go through. This bot doesn't move funds around for you, yet. What coins are you trying to trade and how much of each coin and btc do you have in your exchange accounts, also, what exchanges are you trying to arb? Hi, I am testing with BTC/NXT between Poloniex and Bittrex. Just now offering between 0.45% and 0.85% arbitrage benefit. I have fund of BTC and NXT in both exchanges and the trade size is higher than 50ksats. If i set the minimum in 0% the arbitrage launches successfully. If i set it to 0.1% ( just for testing purposes. I understand the fee), the arbitrage doesn't launch and nothing appears in the box at the bottom.
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 04, 2015, 05:16:51 PM |
|
Hello,
I have started to use arbitrage with quatloo. It works Ok if i set 0% in "Minimum percentage in price diference", but if i change it to 0.1% or 1% it doesn't work. Some pairs appears with 2% of arbitrage possibility, but nothing appears in " Successful Arbitrage" box.
Could you help me?
Thks
A couple of things to keep in mind. First, I wouldn't set the min difference % anywhere below 0.45, that is the fee you will pay between bittrex/polo. Second, you can only have a successful trade if a few things are in alignment, the trade size needs to be above 50ksats, you need to have enough funds in both btc and the coin you are trading at BOTH exchanges for the trade to go through. This bot doesn't move funds around for you, yet. What coins are you trying to trade and how much of each coin and btc do you have in your exchange accounts, also, what exchanges are you trying to arb? Hi, I am testing with BTC/NXT between Poloniex and Bittrex. Just now offering between 0.45% and 0.85% arbitrage benefit. I have fund of BTC and NXT in both exchanges and the trade size is higher than 50ksats. If i set the minimum in 0% the arbitrage launches successfully. If i set it to 0.1% ( just for testing purposes. I understand the fee), the arbitrage doesn't launch and nothing appears in the box at the bottom. Since your arbing bitt and polo, I would say to set the min to 0.45 and leave it alone, you will eventually get a trade. What % of balance are you using? I have been leaving it at 100% for both btc and coins and am making some decent trades. If you don't mind me asking, how much btc and nxt are you working with? I have seen plenty of trades on mine that should have gone through but for some reason the bot didn't make the trade, just let it go and it will eventually start trading when the opportunities arise. Keep in mind as well, that I and plenty of others are arbing next as well, so you have some competition on the arb
|
|
|
|
pakmin
Newbie
Offline
Activity: 5
Merit: 0
|
|
August 04, 2015, 05:45:00 PM |
|
Hello,
I have started to use arbitrage with quatloo. It works Ok if i set 0% in "Minimum percentage in price diference", but if i change it to 0.1% or 1% it doesn't work. Some pairs appears with 2% of arbitrage possibility, but nothing appears in " Successful Arbitrage" box.
Could you help me?
Thks
A couple of things to keep in mind. First, I wouldn't set the min difference % anywhere below 0.45, that is the fee you will pay between bittrex/polo. Second, you can only have a successful trade if a few things are in alignment, the trade size needs to be above 50ksats, you need to have enough funds in both btc and the coin you are trading at BOTH exchanges for the trade to go through. This bot doesn't move funds around for you, yet. What coins are you trying to trade and how much of each coin and btc do you have in your exchange accounts, also, what exchanges are you trying to arb? Hi, I am testing with BTC/NXT between Poloniex and Bittrex. Just now offering between 0.45% and 0.85% arbitrage benefit. I have fund of BTC and NXT in both exchanges and the trade size is higher than 50ksats. If i set the minimum in 0% the arbitrage launches successfully. If i set it to 0.1% ( just for testing purposes. I understand the fee), the arbitrage doesn't launch and nothing appears in the box at the bottom. Since your arbing bitt and polo, I would say to set the min to 0.45 and leave it alone, you will eventually get a trade. What % of balance are you using? I have been leaving it at 100% for both btc and coins and am making some decent trades. If you don't mind me asking, how much btc and nxt are you working with? I have seen plenty of trades on mine that should have gone through but for some reason the bot didn't make the trade, just let it go and it will eventually start trading when the opportunities arise. Keep in mind as well, that I and plenty of others are arbing next as well, so you have some competition on the arb I have try with 100% balance and 10% balance. I have tried don't touch initial conf with 1% minimum and it doesn't launch arbitrage with 3 consecutive opportunities over 1%. Actually i am testing with 0.2BTC and 3000NXT in each exchange and with other pairs. No way . I only have been able to make it work when i set 0% as minimum. With that it works perfect, but i lose money due to the fee in each exchange. I am thinking that perhaps could be something related with my regional configuration. I am in Spain and we use "," as decimal separator instead of "." I have tried inserting 0,1% as minimum but the application doesn't allow it. Can the developer take a look at my problem? I really would like to use it.
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 04, 2015, 06:11:44 PM |
|
Hello,
I have started to use arbitrage with quatloo. It works Ok if i set 0% in "Minimum percentage in price diference", but if i change it to 0.1% or 1% it doesn't work. Some pairs appears with 2% of arbitrage possibility, but nothing appears in " Successful Arbitrage" box.
Could you help me?
Thks
A couple of things to keep in mind. First, I wouldn't set the min difference % anywhere below 0.45, that is the fee you will pay between bittrex/polo. Second, you can only have a successful trade if a few things are in alignment, the trade size needs to be above 50ksats, you need to have enough funds in both btc and the coin you are trading at BOTH exchanges for the trade to go through. This bot doesn't move funds around for you, yet. What coins are you trying to trade and how much of each coin and btc do you have in your exchange accounts, also, what exchanges are you trying to arb? Hi, I am testing with BTC/NXT between Poloniex and Bittrex. Just now offering between 0.45% and 0.85% arbitrage benefit. I have fund of BTC and NXT in both exchanges and the trade size is higher than 50ksats. If i set the minimum in 0% the arbitrage launches successfully. If i set it to 0.1% ( just for testing purposes. I understand the fee), the arbitrage doesn't launch and nothing appears in the box at the bottom. Since your arbing bitt and polo, I would say to set the min to 0.45 and leave it alone, you will eventually get a trade. What % of balance are you using? I have been leaving it at 100% for both btc and coins and am making some decent trades. If you don't mind me asking, how much btc and nxt are you working with? I have seen plenty of trades on mine that should have gone through but for some reason the bot didn't make the trade, just let it go and it will eventually start trading when the opportunities arise. Keep in mind as well, that I and plenty of others are arbing next as well, so you have some competition on the arb I have try with 100% balance and 10% balance. I have tried don't touch initial conf with 1% minimum and it doesn't launch arbitrage with 3 consecutive opportunities over 1%. Actually i am testing with 0.2BTC and 3000NXT in each exchange and with other pairs. No way . I only have been able to make it work when i set 0% as minimum. With that it works perfect, but i lose money due to the fee in each exchange. I am thinking that perhaps could be something related with my regional configuration. I am in Spain and we use "," as decimal separator instead of "." I have tried inserting 0,1% as minimum but the application doesn't allow it. Can the developer take a look at my problem? I really would like to use it. You might be right that its a regional issue. Others have had problems with the bot that were fixed by them changing their kb region. Hopefully this is something that markus is aware of and is willing to fix. Can you run the bot in a VM? Set the VMs keyboard to english? See if that helps.
|
|
|
|
altnews
Member
Offline
Activity: 74
Merit: 10
|
|
August 04, 2015, 09:24:14 PM |
|
You might be right that its a regional issue. Others have had problems with the bot that were fixed by them changing their kb region. Hopefully this is something that markus is aware of and is willing to fix.
I dont know what succesful "others" are you talking about, anyway, changing regional settings just for lulz didn't work for me.
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 04, 2015, 10:05:12 PM |
|
You might be right that its a regional issue. Others have had problems with the bot that were fixed by them changing their kb region. Hopefully this is something that markus is aware of and is willing to fix.
I dont know what succesful "others" are you talking about, anyway, changing regional settings just for lulz didn't work for me. I thought I remembered reading "others" post that keyboard settings fixed it, Maybe I am just insane, thats always a possibility
|
|
|
|
Beefcake
Full Member
Offline
Activity: 279
Merit: 132
Beefcake!!!
|
|
August 11, 2015, 11:07:16 PM |
|
Can't wait for the next update, and to see what features will come with version 3.
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 12, 2015, 04:27:47 AM |
|
Can't wait for the next update, and to see what features will come with version 3.
We are dangerously close to "early august" being but a memory, hopefully we will see that push api support get pushed out asap.
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 12, 2015, 06:42:21 PM |
|
qtl sucks, circ rocks. it's that easy.
And another one bites the dust. Wow, I have added 2 to my ignore list in as many days. How many more?, stay tuned to find out.
|
|
|
|
rdyoung
Legendary
Offline
Activity: 994
Merit: 1000
|
|
August 12, 2015, 06:44:04 PM |
|
Bram there are many bots in crypto land! Circ might be one of them! But please it aint that special!
No point in hijacking this thread with Circuits!
It's more like old supporters trying to help out everyone still stuck on qtl. Whats it like living in la la land? Haven't been in years, wondering how the old crew is doing. Its interesting that you would phrase it that way. How many circ did you buy from the ICO and how high does it need to climb before you can take your profit off the table?
|
|
|
|
MarKusRomanus (OP)
Legendary
Offline
Activity: 910
Merit: 1000
|
|
August 12, 2015, 08:31:26 PM |
|
Hi everyone! I wanted to give everyone an update about where things are with my Quatloo Trader work. I've been steadily working on Push api real time features for poloniex and cryptsy trading and arbitrage. A lot is done, but i did not finish before my vacation started this past Sunday. I'll be on vacation until august 16th. By then, however, I will post a demo video of the latest prototype in real time polo-cryptsy trading. We're a little behind schedule, yes, but a lot has been accomplished! stay tuned!
|
|
|
|
hiddensphinx
Legendary
Offline
Activity: 1457
Merit: 1001
|
|
August 13, 2015, 03:45:59 AM |
|
Thanks for the update Markus
|
|
|
|
|