KanoPool since 2014 🐈 - PPLNS and Solo 0.5% fee - Worldwide - 2438 blocks

[raidbak]

How long does it usually take to receive payout from the pool? as i still didn't receive my share of yesterdays payout but it is listed under payments on the site

[fvineyard]

Once a block matures the payout is sent in the next block mined by our pool. That allows the payout to be sent with no transaction fee and more goes to the miners that way. The downside is we have to wait for the next block to be mined  here, but that is a small price to pay for the benefit gained.

[firetreeactual]

How long does it usually take to receive payout from the pool? as i still didn't receive my share of yesterdays payout but it is listed under payments on the site

Once a block is matured (101 confirmations) it goes into the queue for payment. When the next block is found, that payment is processed and sent (along with any other matured blocks waiting).

Kano does it this way to enable more efficient confirmations. What you see on the "Payments" page isn't necessarily what's been transmitted.

441517, 441552 and 441613 will transmit when the next block is found.

That help?

EDIT: Just saw fvineyard's post...same difference. 

[raidbak]

Very clear thanks both of you

[-ck]

By the way, for those of you working on getting sdcards working and other shit to get your A7s mining, you can actually run them off the master cgminer and a regular PC in the meantime. Grab the latest master cgminer, build it with avalon7 support, and plug the avalon7 into your pc/laptop and mine in the meantime until you can get your RPis working. Not only that but you'll get newer code than is on the RPi images with my improvements and bugfixes.

[clgrissom3]

By the way, for those of you working on getting sdcards working and other shit to get your A7s mining, you can actually run them off the master cgminer and a regular PC in the meantime. Grab the latest master cgminer, build it with avalon7 support, and plug the avalon7 into your pc/laptop and mine in the meantime until you can get your RPis working. Not only that but you'll get newer code than is on the RPi images with my improvements and bugfixes.

That's good to know!  Thanks!

[clgrissom3]

Block by kaliorang with 138TH/s!  Welcome to the Acclaim Board with your 1st Kano block!  There are 0.96BTC in fees in this block! 

[kano]

I just went full mad mode on the RPi provided by Canaan.

In the Advance settings, there are no tabs at all and controller is not showing the miners connected.

Furthermore, the Userinterface is totally different from what was posted by the reviewes. No update, upgrade, back up or anything at all!!

Now I am like a mad dog looking for an sd card reader to flash a new image.

No mining today.

You realize that the miner is static IP'd to 192.168.0.100? If you're using DHCP you'll have to Macgyver your setup to access the machine to change it's IP to match your subnet, or change it to DHCP. The GUI you first get when you boot up the RPi is not the usual interface (CGMiner) you see when you're operating.

You don't need to update, upgrade, or anything else to get up and running. I went through a similar stress when mine first arrived...I had forgotten about the IP thing.

Try going directly to 192.168.0.100 if you haven't already.

I did go there and put it in DHCP but same thing.

No mining no tabs.

Hmmm...dunno. Also make sure you've got the correct image on the micro-SD. If you got the RPi from them, it should be flashed correctly, but it wouldn't hurt to reflash it.

Will flash a new sd card tomorrow morning and see the differences.

Will update you as soon as it starts.

If you get the black+red simple setup web screen then just click on the red button "Advanced Version" to get the old more advanced tab web interface.

If it's messed up for some reason, it'll be either the wrong RPi version or a bad SD
Old quote of mine from long ago: Make sure they are Class 10 SDs

[generalt]

By the way, for those of you working on getting sdcards working and other shit to get your A7s mining, you can actually run them off the master cgminer and a regular PC in the meantime. Grab the latest master cgminer, build it with avalon7 support, and plug the avalon7 into your pc/laptop and mine in the meantime until you can get your RPis working. Not only that but you'll get newer code than is on the RPi images with my improvements and bugfixes.

That's pretty awesome.  So people can run this off say a Windows PC and use teamviewer or something to get remote access to them.  I mean I'm sure there's something similar for the RPi but some people are just more familiar with Windows.

[hhumaidan]

By the way, for those of you working on getting sdcards working and other shit to get your A7s mining, you can actually run them off the master cgminer and a regular PC in the meantime. Grab the latest master cgminer, build it with avalon7 support, and plug the avalon7 into your pc/laptop and mine in the meantime until you can get your RPis working. Not only that but you'll get newer code than is on the RPi images with my improvements and bugfixes.

That's pretty awesome.  So people can run this off say a Windows PC and use teamviewer or something to get remote access to them.  I mean I'm sure there's something similar for the RPi but some people are just more familiar with Windows.

How?

Can you guide us on how to set it up?

[-ck]

By the way, for those of you working on getting sdcards working and other shit to get your A7s mining, you can actually run them off the master cgminer and a regular PC in the meantime. Grab the latest master cgminer, build it with avalon7 support, and plug the avalon7 into your pc/laptop and mine in the meantime until you can get your RPis working. Not only that but you'll get newer code than is on the RPi images with my improvements and bugfixes.

That's pretty awesome.  So people can run this off say a Windows PC and use teamviewer or something to get remote access to them.  I mean I'm sure there's something similar for the RPi but some people are just more familiar with Windows.

How?

Can you guide us on how to set it up?

That's what documentation was invented for:
https://github.com/ckolivas/cgminer/blob/master/README

Please don't ask about windows. You'd be nuts to consider mining with windows at this point, though I will be releasing windows binary when I finally release the next version but there's no hurry to do so and it's just out of legacy that I still do so.

[xxxgeniy]

Block! by sashaandrey70 with 93 Th   Second block per day )

[clgrissom3]

Block by borachinua with 41.29TH/s!  This is his 2nd Kano block and our 3rd of the day! 

[hhumaidan]

Finally units are working!

Hey Kano,

Can you guide me on how to apply the changes you mentioned?

I am not a computer savy and need to learn.

So guide me step by step

[kano]

Finally units are working!

Hey Kano,

Can you guide me on how to apply the changes you mentioned?

I am not a computer savy and need to learn.

So guide me step by step

SSH login to your RPi

Important all below is CASE sensitive

Then type the blue:
vim /etc/crontabs/root<enter>
N.B. <enter> means press the enter key
Then move your cursor to the right, with the arrow keys, until it's over the '5'
Then type the following keys to change the '5' to a '2' and save the changes:
R2<esc>ZZ
N.B. <esc> means press the esc key

Next the monitor:
vim /usr/bin/cgminer-monitor<enter>
Then to find the text we wanna change:
/Valid<enter>
Then type the following keys to change 'Valid Work' to a 'Share Time' and save the changes:
RShare Time<esc>ZZ

Done.

[hhumaidan]

Anyone who gets an A7, I would suggest a change on the advanced web configuration page:
More Options: --avalon7-nonce-mask 26
It should speed up the hash rate ramp up.

Ok done applying.

Only the above left. How do I apply it?

[firetreeactual]

Finally units are working!

Hey Kano,

Can you guide me on how to apply the changes you mentioned?

I am not a computer savy and need to learn.

So guide me step by step

I'm glad to see you're getting there. Kano and Con are both good people.

[HagssFIN]

Anyone who gets an A7, I would suggest a change on the advanced web configuration page:
More Options: --avalon7-nonce-mask 26
It should speed up the hash rate ramp up.

Ok done applying.

Only the above left. How do I apply it?

In the pool configuration view you should see a blank field "More options".
Insert --avalon7-nonce-mask 26
in that field.

[hhumaidan]

Anyone who gets an A7, I would suggest a change on the advanced web configuration page:
More Options: --avalon7-nonce-mask 26
It should speed up the hash rate ramp up.

Ok done applying.

Only the above left. How do I apply it?

In the pool configuration view you should see a blank field "More options".
Insert --avalon7-nonce-mask 26
in that field.

Wohooo

Thank a lot

[firetreeactual]

Anyone who gets an A7, I would suggest a change on the advanced web configuration page:
More Options: --avalon7-nonce-mask 26
It should speed up the hash rate ramp up.

Ok done applying.

Only the above left. How do I apply it?

In the pool configuration view you should see a blank field "More options".
Insert --avalon7-nonce-mask 26
in that field.

Wohooo

Thank a lot

Yup...it does make a difference. One of the easier tweaks...