Vertcoin - 1 | ASIC - 0 | Lyra2RE | Decentralised | GPU Mineable | Open Source

[ReiMomo]

How you solo mine on testnet?

[1714277868]

1714277868

[1714277868]

1714277868

[1714277868]

1714277868

[GKar]

Is there a gpu miner for an amd R7 card? 

[djm34]

Is there a gpu miner for an amd R7 card? 

yes, please try it and report problems: https://github.com/djm34/sgminer/releases

[jamesl22]

How you solo mine on testnet?

You can just connect to the wallet through rpc with your miner.

[DonCoreRA]

Hello Vertans

I have a RIG whit 3 AMD 280X GPU`s and PIMP OS installed.
Im a NOOB on Linux, how can i update PIMP to the new Lyra2REv2 Miner...?
THX

Greez DON

[induktor]

Verters Ready For Fork - Links For Wallet and GPU Miners On Getting Started Page

The oldest Vertcoin pool. Ready for the fork at 347000. Update your wallets and miners ready for the 10th August.
https://pool.verters.com
https://pool.verters.com/index.php?page=gettingstarted

awesome
I send you an email about this, good to know your pool is ready, is the one i use! , will the port 4444 work as well or should I use 3333 instead after the fork?.
also, there is any way to test it now?, i get share above target when i try to mine with lyra2v2 now (I know it won't work until 347000 but just wanna be sure it will work then )
i was able to solo mining fine.
thanks!

[jamesl22]

Verters Ready For Fork - Links For Wallet and GPU Miners On Getting Started Page

The oldest Vertcoin pool. Ready for the fork at 347000. Update your wallets and miners ready for the 10th August.
https://pool.verters.com
https://pool.verters.com/index.php?page=gettingstarted

awesome
I send you an email about this, good to know your pool is ready, is the one i use! , will the port 4444 work as well or should I use 3333 instead after the fork?.
also, there is any way to test it now?, i get share above target when i try to mine with lyra2v2 now (I know it won't work until 347000 but just wanna be sure it will work then )
i was able to solo mining fine.
thanks!

You can solo mine through the wallet on testnet launching the wallet with the -testnet flag.

[djm34]

I would also encourage anyone to test the miners... now rather than waiting after the launch to discover something isn't working...

[induktor]

You can solo mine through the wallet on testnet launching the wallet with the -testnet flag.

Thank you!, excellent, it's working , I got a TON of coins on testnet hehe 

I would also encourage anyone to test the miners... now rather than waiting after the launch to discover something isn't working...

Indeed!, like the previous fork with the intensity issue, nearly 5 hours mining nothing it won't happen again hehe

[DonCoreRA]

I would also encourage anyone to test the miners... now rather than waiting after the launch to discover something isn't working...

I have testet the sgminer on my System whit a  ASUS R9 290X
the miner give my a :
fatal JSON ERROR in configuration file
configuration file can not be used

hmm whats wrong?!?

My config file sgminer.conf:

{
"pools": [
{
"url": "***",
"user": "***",
"pass": "***"
}
],
"algorithm": "Lyra2REv2",
"xintensity" : "32",
"worksize": "32",
"gpu-threads": "8",
"gpu-engine" : "835",
"gpu-memclock" : "1250",
"gpu-powertune" : "-40",
"temp-cutoff": "95",
"temp-overheat": "85",
"temp-target": "65",
"auto-fan" : true,
"gpu-fan" : "0-80",
"api-mcast-port": "4028",
"api-port": "4028",
"expiry": "30",
"failover-only": true,
"failover-switch-delay": "60",
"gpu-dyninterval": "7",
"log": "5",
"no-pool-disable": true,
"queue": "1",
"scan-time": "7",
"tcp-keepalive": "30",
"temp-hysteresis": "3",
"kernel-path" : "/usr/local/bin",
}

[djm34]

I would also encourage anyone to test the miners... now rather than waiting after the launch to discover something isn't working...

I have testet the sgminer on my System whit a  ASUS R9 290X
the miner give my a :
fatal JSON ERROR in configuration file
configuration file can not be used

hmm whats wrong?!?

My config file sgminer.conf:

{
"pools": [
{
"url": "***",
"user": "***",
"pass": "***"
}
],

probably that... 
json error are connection problems, meaning you have problem to either connecting to the "*****" pool or wallet

[DonCoreRA]

ah ok!
you mean after the Fork, it works?

[pallas]

I would also encourage anyone to test the miners... now rather than waiting after the launch to discover something isn't working...

I have testet the sgminer on my System whit a  ASUS R9 290X
the miner give my a :
fatal JSON ERROR in configuration file
configuration file can not be used

hmm whats wrong?!?

My config file sgminer.conf:

{
"pools": [
{
"url": "***",
"user": "***",
"pass": "***"
}
],

probably that... 
json error are connection problems, meaning you have problem to either connecting to the "*****" pool or wallet

no it's much easier, just remove the comma at the end :-D

"kernel-path" : "/usr/local/bin",  <==== THIS ONE
}

[DonCoreRA]

I would also encourage anyone to test the miners... now rather than waiting after the launch to discover something isn't working...

I have testet the sgminer on my System whit a  ASUS R9 290X
the miner give my a :
fatal JSON ERROR in configuration file
configuration file can not be used

hmm whats wrong?!?

My config file sgminer.conf:

{
"pools": [
{
"url": "***",
"user": "***",
"pass": "***"
}
],

probably that... 
json error are connection problems, meaning you have problem to either connecting to the "*****" pool or wallet

no it's much easier, just remove the comma at the end :-D

"kernel-path" : "/usr/local/bin",  <==== THIS ONE
}

Nice!!!
it works
THX pallas

The Miner give my 2.5 Mh/s whit my config... good or not?!?
Sys: Win 7 64bit
       AMD Catalyst 13.12 <===beter update 14.6 or 14.9?!?
       

[djm34]

I would also encourage anyone to test the miners... now rather than waiting after the launch to discover something isn't working...

I have testet the sgminer on my System whit a  ASUS R9 290X
the miner give my a :
fatal JSON ERROR in configuration file
configuration file can not be used

hmm whats wrong?!?

My config file sgminer.conf:

{
"pools": [
{
"url": "***",
"user": "***",
"pass": "***"
}
],

probably that... 
json error are connection problems, meaning you have problem to either connecting to the "*****" pool or wallet

no it's much easier, just remove the comma at the end :-D

"kernel-path" : "/usr/local/bin",  <==== THIS ONE
}

Nice!!!
it works
THX pallas

The Miner give my 2.5 Mh/s whit my config... good or not?!?
Sys: Win 7 64bit
       AMD Catalyst 13.12 <===beter update 14.6 or 14.9?!?
       

no it isn't really good...
I get around 7MH/s with my 290x (I still use a 13.something driver)
with this setting "-g 18 -w 32 -I 17"

for info, here what I get:
* ccminer:
gtx980 (OC) 12MH/s
gtx780ti (OC) 10MH/s
gtx750 (OC) 4.7MH/s

* sgminer
290x (msi with "bad" memory)
7MH/s with the above setting

[DonCoreRA]

Booah Nice!

I need more optimization

Ok, after install the 14.9 Driver i get 6 Mh/s whit my ASUS 290X DCU2
whats your gpu-engine&mem speed?

[djm34]

Booah Nice!

I need more optimization

Ok, after install the 14.9 Driver i get 6 Mh/s whit my ASUS 290X DCU2
whats your gpu-engine&mem speed?

1250MHz for the mem (since it doesn't take anything else)
1030MHz core (default clock on the msi gaming)

[DonCoreRA]

Booah Nice!

I need more optimization

Ok, after install the 14.9 Driver i get 6 Mh/s whit my ASUS 290X DCU2
whats your gpu-engine&mem speed?

1250MHz for the mem (since it doesn't take anything else)
1030MHz core (default clock on the msi gaming)

Thanks!
I Test a litelbit now
Thanks all, for your great Support!


Greez from a europen Vertan...
Don

[TheCoinFinder]

stratum+tcp://pool.verters.com:3333 dedicated pre-fork lyra2re2 port

All shares submitted will be attributed to user accounts. This port will be joined by port 4444 after the fork. But if you want to test your setup, port 3333 is now setup for the lyra2rev2 algo.

[pallas]

stratum+tcp://pool.verters.com:3333 dedicated pre-fork lyra2re2 port

All shares submitted will be attributed to user accounts. This port will be joined by port 4444 after the fork. But if you want to test your setup, port 3333 is now setup for the lyra2rev2 algo.

seems to be working, but diff stays too low and a ton of shares are generated.
is vardiff enabled on that port?