Hi
Bug
Awesome miner ver 6.0.11 and Gminer 1.17
The received shares accepted are not displayed in the Awesome miner window, and in the miner’s console window the shares are also displayed on the pool.
algo 150_5
Your observation is correct and it's only for Equihash 150,5 where it's missing the information. When I use the API Report button in Awesome Miner, the output from the Gminer API indicates the following - even if I see accepted shares in the Console window: "stratum": { "accepted_shares": 0, "rejected_shares": 0 } I will share these details in the Gminer thread as well - and give you the credits for finding it. Hi Patrike Is the issue resolved with gminer? when will the issue be resolved? Can I help you? P.S. https://t.me/gminer_betaI've reported the issue to the Gminer developer but I don't have any details on when it will be corrected. As soon as Gminer is reporting the accepted shares over the API it will show up correctly in Awesome Miner. |
|
|
|
@Patrike
Profit Switch Rules ?
Is it possible to switch to a pool right after they found block?
Scenario:
Set up multiple pools same coin.
Switch to pool that just found Block.
Mine that pool for a minimum fixed time then switch to next pool that finds block.
Thanks
This is not supported for GPU mining in general as Awesome Miner doesn't know when a block is found. It's only when you use cgminer for ASIC's or sgminer for GPU that found blocks are being reported over their API's to Awesome Miner. In those cases the rule trigger "Detect found blocks" can be used. |
|
|
|
Hello @PAtrike I inform you of something that is not going well
Choosing the exchange works most of the time, but I find coins, I put for example SAFECOIN which by default is in crex24, but also that currency is in safe.trade, but if I choose the pool safe.trade, it remains in gray and it does not work. I have to use Crex24 and raise the profit to get closer to the Safe.trade figure
It happens in more coins, plusonecoin appears as tradesatochi, but it is also in cryptobridge, but if I select it, it stays gray and does not work.
It is not if you are missing data in the API or have an error somewhere. But this system I love, it is perfect except for these small mistakes.
I think that with the two coins that I have mentioned you can try it yourself in your copy of AM, and see if you skip data API, or if the api does not give the price etc ...
That's why I've been saying for a long time that AM should consult the Exchanges apis, just like AM CU does, and have the price on its own, not depend on external apis. Leave the apis of the aggregators just to add the coins, and get the AM prices on their own.
I hope you have an easy and simple solution.
Awesome Miner didn't correctly map some of the Equihash-based algorithms for CoinToMine. For this reason, I only got SAFE from CoinCalculators.io and not from CoinToMine, even if I would make CoinToMine the priority. For SAFE on CoinCalculators the only exchange is Crex24. This is the reason you would get gray display of the coin if you force it to use the Safe.Trade exchange. This works as soon as I made a correction for the algorithm mapping of this coin, and this correction will of course be part of the next Awesome Miner release. However, you will still be limited to the exchanges that are provided by these services. For Plusonecoin, CoinToMine only list it on TradeSatoshi and SouthXchange, not Cryptobridge even if it may exist there. So I suppose this is the general limitation we have right now that the exchanges that Awesome Miner can get information about are those reported by these coin statistics providers. As Awesome Miner doesn't support interacting directly with the exchanges (I do know you want this feature), the only solution now is to report any missing exchanges to the providers of these coin statistics services. |
|
|
|
Any Instructions on how to use google Drive for auto download of miner software. The link generated by drive is not.zip even though the file is. @Patrike
I configured the shared link to auto download and it works but Awesome miner is not finding the miner. Any info anyone please.
I just want this for all the miners that are not on git hub or should I say that are on mega.
Thanks
I don't have any real answer to this - maybe someone else have additional information. In general, these download sites like Mega and probably Google Drive as well doesn't allow direct linking to their content by default. They require you to manually go into their web sites to download the files. I have seen that there are direct download link generators out there for at least Mega, but I've not tried the concept myself. The purpose of those tools is that you enter a Mega URL and then it will give you a real URL where you can download the file right away. I also would recommend to keep pointing out to the mining software developers that they should make their releases available on Github. It should be in their own interest that they make the software easily available for many users. The more users that demand this - the more likely it is to happen. |
|
|
|
@Patrike can provide me with a URL for Gminer 1.18 that is already comptabile with RTX. Since the download is in MEGA, I can not use it as custom. I know you upload it to your own AWS CDN, if you can provide me with a valid URL to add it as custom I would appreciate it
Please use the following link for GMiner 1.18: https://s3.amazonaws.com/awesomeminer-download/gminer_1_18_windows64.zip |
|
|
|
|
I got a report from @baf28 that Awesome Miner didn't display the number of accepted shares when mining, while the Gminer console window and the pool were both reporting that shares are being accepted.
It looks like that for the Equihash 150,5 algorithm, the API output from Gminer always indicates 0 accepted shares. It works fine for the other algorithms.
|
|
|
|
Hi
Bug
Awesome miner ver 6.0.11 and Gminer 1.17
The received shares accepted are not displayed in the Awesome miner window, and in the miner’s console window the shares are also displayed on the pool.
algo 150_5
Your observation is correct and it's only for Equihash 150,5 where it's missing the information. When I use the API Report button in Awesome Miner, the output from the Gminer API indicates the following - even if I see accepted shares in the Console window: "stratum": { "accepted_shares": 0, "rejected_shares": 0 } I will share these details in the Gminer thread as well - and give you the credits for finding it. |
|
|
|
Any chance for add TT-Miner integration to your software?
I have this one on the todo-list but I've not yet had time to investigate it. If there is a real demand for it and it performs better than all other mining software it can be added. |
|
|
|
Can we get support for Aeternity now that BMiner supports it.
Yes, there will be a new development version released soon. It will have BMiner 11.4 including CuckooCycle (Aeternity) and Equihash 150.5 (Beam) support. I am using the Bminer on AwesomeMiner for Aeternity but it looks like there is no support for Rig Names or atleast its not working. Can we get this fixed. If you use the Diagnostics button to verify the command line generated by Awesome Miner, is the rig name (the field "Add to Worker Name" defined in the Properties of your Managed Miner) missing here? When I try with "SomeUniqueName" as for the setting "Add to worker name" it shows up correctly: bminer.exe -uri aeternity://MyWalletHere.SomeUniqueName:x@ae.f2pool.com:7898 |
|
|
|
I signed up just for the purpose of testing AwesomeMiner for Beam but I can't run the benchmark tools. So far it seems to be working averaging 60 - 62 H/s using 8 1070's. I'm also keeping in mind that we're pretty limited on pools and exchanges for Beam at the moment so I think we can expect some wrinkles. Great start and I appreciate your hard work and dedication. Is it that Equihash 150,5 isn't listed as part of the benchmark or that the actual benchmark is failing? The benchmark feature currently requires an algorithm to be made available for the profit switcher via the pools defined in the Options dialog, Profit Switching section - for example as a custom pool. |
|
|
|
Hello @patrike another easy and useful suggestion.
I usually make measurements of how much a coin / pool yields. With which in the end I get a profit to vary in the currency pool in AM, I have from 0.80 to 1.30.
In the Miners tab, this is correctly reflected, the profit that shows is the one that estimates AM + my profit correction of the currency pool.
But in the Coins tab it does not reflect. If a two coins have a gain of 0.0020 but one has a profit of 0.80 and another of 1.10, it should show 0.0016 and the other 0.0022. In this way, by ordering the coins for profit, it will do so in a correct manner. Because in Coins it shows the profitability without modifying the profit stipulated by me. And sometimes it drives me crazy. Why does it change to this currency and not to this one? Sometimes it changes to the fourth most profitable currency instead of the third, and the reason is that it auto swicth if it is taken into account, but it is not shown in Coins. I hope it is understandable and that you see it logical, because for me it is.
You have a Profit Factor setting for both a Pool and a Coin. I assume you ask about the Profit Factor for the Pool (please correct me if I misunderstood your question)? The setting for the Coin is used by both the Coins tab and the Miners tab. The setting for the Pool is only used on the Miners tab, not the Coins tab. The reason is that you can have two pools for the same coin, and these two pools can have different Profit Factors. For that reason it's not possible to say that the coin has a certain profit factor as it will depend on which of these pools you are actually mining on. I understand you but I do not share it. Suppose I have 2 groups for the same currency, something that would be very strange. With having in the pool configuration a box to mark, that is type. Use this "profit" in coins, and do not mark it in the other group, the problem is already solved. That it helps me to be getting the "profits" measured by hours of different currencies / pools, if then this is not reflected in Coins. In coins tells me how much I will get according to my hash, but that does not take into account my deviation from the "profit" 0.9 - 1.1 and even from 0.7 to 1.3 I work a lot. Then it does not make much sense to see the coins tab, because it does not take into account this information. If I have several Pools for a coin, only one should be marked "use this profit in coins", I do not see it difficult. Well, they are only suggestions in good faith. I will have to think about this a bit more. Right now the Coins tab is only representing the coins and any profit factor on the coins. A coin is not linked to any pool - it's always the other way around and multiple pools can use the same coin. Maybe there should be a new Pools tab in the future? That one could show information from a Pool point of view instead of Coins point of view. |
|
|
|
|
Awesome Miner version 6.0.11 (Development preview of 6.1)
This is a minor update. Power usage factors can be configured individually for AMD and nVidia if needed. Mining software versions have been updated:
- T-Rex miner 0.9.1
- Gminer Cuda Miner 1.15, including support for Equihash 150.5 (Beam)
- BMiner 11.4, including dual mining of Ethereum and Tensority (BTM). CuckooCycle (Aeternity) and Equihash 150.5 (Beam) support.
|
|
|
|
Can we get support for Aeternity now that BMiner supports it.
Yes, there will be a new development version released soon. It will have BMiner 11.4 including CuckooCycle (Aeternity) and Equihash 150.5 (Beam) support. |
|
|
|
Hi,
I'm trying to update from 0.6.9 to 0.6.10 but it fails everytime.
Here is the log
Hi. Can you please try to reboot the system once? It's not too uncommon that pending Windows Updates are preventing MSI-based installers from running correctly. |
|
|
|
need the "override config" like i can use at SRB also for JCE and other miners  I think this would make sense - to have a generic feature as well to be able to push any configuration file to any mining software. I will note your request. Thanks! |
|
|
|
any possibility to add profitbotpro to statistic providers?
Yes. I was actually having a discussion with the author of this service about two weeks ago. Once I get a chance I will look into it in more detail and it's for sure a feature candidate. |
|
|
|
Hello @patrike another easy and useful suggestion.
I usually make measurements of how much a coin / pool yields. With which in the end I get a profit to vary in the currency pool in AM, I have from 0.80 to 1.30.
In the Miners tab, this is correctly reflected, the profit that shows is the one that estimates AM + my profit correction of the currency pool.
But in the Coins tab it does not reflect. If a two coins have a gain of 0.0020 but one has a profit of 0.80 and another of 1.10, it should show 0.0016 and the other 0.0022. In this way, by ordering the coins for profit, it will do so in a correct manner. Because in Coins it shows the profitability without modifying the profit stipulated by me. And sometimes it drives me crazy. Why does it change to this currency and not to this one? Sometimes it changes to the fourth most profitable currency instead of the third, and the reason is that it auto swicth if it is taken into account, but it is not shown in Coins. I hope it is understandable and that you see it logical, because for me it is.
You have a Profit Factor setting for both a Pool and a Coin. I assume you ask about the Profit Factor for the Pool (please correct me if I misunderstood your question)? The setting for the Coin is used by both the Coins tab and the Miners tab. The setting for the Pool is only used on the Miners tab, not the Coins tab. The reason is that you can have two pools for the same coin, and these two pools can have different Profit Factors. For that reason it's not possible to say that the coin has a certain profit factor as it will depend on which of these pools you are actually mining on. |
|
|
|
PAtrike can give us an url with the new t-rex 9.1, I do not trust other sources, so I can add custom.
Bookmark this page: https://github.com/trexminer/T-Rex/releasesThat is the official release page. Right click the release you wish to use and copy the link address. Paste that into the custom field in Awesome Miner. That will be the link AM uses once it is updated. You can do the same for Cryptodredge whenever they post a new release, at: https://github.com/technobyl/CryptoDredge/releasesDon't forget to set the custom Folder name inside Zip-file for CryptoDredge as well. Hope that helps, ...jim That's correct. For the mining software that are released on the official Github pages, Awesome Miner is simply linking to these download links. The new T-rex link to be used is the following for example: https://github.com/trexminer/T-Rex/releases/download/0.9.1/t-rex-0.9.1-win-cuda10.0.zipIt's only in the scenarios where mining software are released on Mega and similar sources where direct linking isn't available I put it on the Awesome Miner cloud file store and point Awesome Miner in that direction. |
|
|
|
Can you add ENERGI(NRG) coin ?
Thankyou
Awesome Miner will automatically populate all coins from the sources like WhatToMine, CoinCalculators and CoinToMine. So as soon as this coin shows up with statistics on any of these sites, it will also be displayed in Awesome Miner. Enegi coin is it on coincalculators page.... OK. So right now Awesome Miner doesn't have this algorithm predefined. I will add it to the next release. If you manually add the algorithm "EnergiHash" in Awesome Miner, this coin will show up. |
|
|
|
|
Show Posts
