Hi Patrike,
I have been using the "Factor" column in the Online Services table to adjust for the fees charged by each pool and algorithm. Now that some of the pools (AHashPool, ZPool, BlazePool, perhaps others) include the fee information in their API's, is Awesome Miner taking advantage of that information?
If so, is Awesome Miner adjusting things to account for the detected fee? Perhaps an additional column could be added to the Online Services table to show the fee as detected by Awesome Miner. If no fee is detected for a pool/algorithm, but the pool does charge a fee, then the Factor column could be used as I'm using it now.
If not, please consider this as a feature request for a future version.
Thanks,
...jim
Hi Jim, This will be supported in the future. It's currently not automatically adjusted for these fees. |
|
|
|
You need a better miner for progpow, the one that there is by default in AM does not work at all well and in RTX gives cuda error
I have a nVidia RTX 2070 that I use for testing mining software and I'm currently on driver version 416.34. I do know that there are a bit newer drivers available. ProgPow Cuda is mining fine when I test it on bci.suprnova.cc. The GPU is hashing and the pool is accepting the shares. Could it be that the mining software is sensitive to the specific driver version? I'm of course always open for suggestions for other mining software to support in Awesome Miner. |
|
|
|
@patrike Hi, there is a big problem when I use import/export. In the case of import pools, when I import the pools, they appear correctly but if I close AM and return it to open, none is recorded. There is no pools  I wasn't able to reproduce this one. Is the procedure the following? 1) Export a pool to a file 2) Import the pool again 3) Restart Awesome Miner 4) Verify via Options dialog, Pools section Yes. And when I close AM and then I open AM. There is no pool Could you please send me your export file and Awesome Miner log file and I will try to import to my system and review this scenario. Thanks! |
|
|
|
@patrike Hi, there is a big problem when I use import/export. In the case of import pools, when I import the pools, they appear correctly but if I close AM and return it to open, none is recorded. There is no pools I wasn't able to reproduce this one. Is the procedure the following? 1) Export a pool to a file 2) Import the pool again 3) Restart Awesome Miner 4) Verify via Options dialog, Pools section |
|
|
|
Hey man can you add ubqminer 0.17.0-alpha.1 https://github.com/ubiq/ubqminer/releasesubiq forked an neither CM,ethminer, bminer or phoenixminer works now. ethminer 0.17.0-alpha.1 doesn't work . I got the ubqminer working with the upload tool under ethminer my settings if it helps --work-timeout 880 --cl-local-work 64 -G ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ I put that in the command line then i let awesome do the rest . I'm sure your a ware of it, just making it easy for others that mine ubiqcoins Thanks for the suggestion. I think this miner is a bit too specialized (a single coin, and not one of the most popular) to be added by default. There must always be some room for the pro-users to include their own mining software which can give a little more profit (which is only the case as long as not everyone has access to it). |
|
|
|
@Patrike average revenue per day, I hope that over time I have a graph. In this way to select 7 days or 30, see a graph with its peaks, falls etc.. And see easily if I go wrong or good.
Surely you already have planned, but hey, I provide ideas.
As it is now, it is only 1 figure, a graph of 7, 15 and 30 days, it would give a more realistic view that if my changes in mining make me win or lose.
and by asking, you will not have the link of the last Z-enemy that is optimized with RTX ?, and I add it from the zip url.
Your observations are correct - the plan is to give more flexibility for time intervals. Right now Awesome Miner collects the data and the presentation doesn't offer too much flexibility. Collecting the data is however of most importance to release first. Once the data is stored, Awesome Miner can be improved in later release to visualize it in a good way. Custom time intervals is one of the next features to be added and graphs will be added later on as well. This is the Z-enemy miner link used by Awesome Miner. My understanding is that this version do includes improved support for the RTX-series. https://s3.amazonaws.com/awesomeminer-download/z-enemy.1-24-cuda10.0_ver3.zip |
|
|
|
GMiner CUDA Equihash Miner v1.08 - https://bitcointalk.org/index.php?topic=5034735.0Performance on stock GPU settings: Equihash 144,5: Palit GTX 1070 Ti JetStream 8GB ~ 59 Sol/sMSI GTX 1080 SEA HAWK EK X 8GB ~ 61 Sol/sEVGA GTX 1080 Ti Founders Edition 11GB ~ 84 Sol/sGigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~ 89 Sol/sDownload links: Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A please add and make GPUs to choose Thanks - Gminer will be included in the next release. I the problem that I have with the different Equihash is to configure the pool. It is not set equal to dstm, that EWBF than Bminer. Here I am pretty lost. it is not worth putting the wallet and the strato, you have to add more lines to make it work, they have me crazy with the equihash, I would like it to be easier to configure the equihash independent of the miner. I currently deal with EWBF with a special lien for each A-L-G-O and currency, a terrible mess. Some help fields or some lines in the documentation would be fine to have these protocols dominated. Is it the personalization string required for the different Equihash coins you are referring to here (can be configured in the Pool Properties)? Or do you have any example? |
|
|
|
where i live the temps between day and night at this time of the year is huge. it goes to anywhere from 26-30 degrees at noon and as low as 6-12 at night.
I need some advice regarding asic freq change based on temps.
what would be the easiest way whereby i check temps if they are 90c and frequency is say 500 it drops to 450 , if temps are still 450 another rule will handle the drop to 400m. same goes for when they are cool enough and i need to increase the frequency.
This might be possible to solve by making using of Tags. In your rule that detect 90C and change the frequency to 450, you can have an additional action "Modify miner tag", where you add a tag like "Freq450". Maybe there should be a Wait item in between to delay setting the miner tag. You can then have a second rule with two triggers - one to look for temperature and another one to look for the tag "Freq450". More about miner tags: https://support.awesomeminer.com/support/solutions/articles/35000086029-add-tags-to-miners |
|
|
|
Hi again,
Another minor issue. I had previously selected and benchmarked CryptoNightV8, but decided not to mine it. I turned it off in the "Algorithms" table:
and it does not appear in the "Profit Profiles" table for nVidia GPU (I do not have anything set in AMD GPU or Intel CPU profit profiles):
Nor does it appear in the "Managed Software" table for the indicated miner (in this case, CryptoDredge):
However, it is appearing in the Benchmark table:
Is there a way to fix this?
I am using v5.7.10 free version.
Thanks,
...jim
Right now the algorithms are still visible in the Benchmark dialog. The idea is to allow you to benchmark and test algorithms without having them included in your actual profit switching yet. Maybe there should be a setting in the benchmark dialog to exclude these entries that are not included. |
|
|
|
Hi there...
I seem to have a few items in the "Predefined online services" table that are duplicated (see image). Is there a way to fix this? It is not affecting the mining, so not an urgent thing.
I am using v5.7.10 free version.
Thanks,
...jim
Thanks for your question. Awesome Miner should not add new entries if there is an existing entry with the same URL and algorithm. Have you ever made any specific configuration to these entries that show up as duplicates? Would it be possible for you to send me your Awesome Miner configuration file (%appdata%\AwesomeMiner\ConfigData.xml) via mail? Thanks! |
|
|
|
Hi Patrike, I'm not sure how considered (potentially) malicious it would be, but do you think it's possible to implement some kind of web scraper to collect the data (such as https://www.parsehub.com/) and provide them into AM in a similar manner as how I did it in the video? (best with site operators permission of course). First of all - cool concept and thanks for sharing. I don't want to make any enemies by having too specific support for scaping coin data, so it needs to be some kind of balance here. A more generic way of collecting data could make sense in the future. I've had some initial discussions with ShitToMine about providing an API with Awesome Miner. I've expressed that I'm planning to support it once an API is available. I don't have any more updates to share on this right now. |
|
|
|
I think I found a fault or a bad performance
I activate coins, nicehash and Zpool. But in Zpool I only activate protocols that are not in nicehash. For example, not active in Zpool Neoscrypt. But ignore it, mine that "A-l-g-o" even though I do not have it selected in the coin pool and auto exchange.
That did not happen before, and I've been watching it for a few weeks. "a-l-g-o-s" that I do not have activated in zpool, mine, ignore my configuration
Yesterday I put an error that I think has been deleted from the forum, I do not know what happened.
It is about the selection of a-l-g-o-s from auto exchange for example nicehash and zpool.
I for example do not have selected hmq1725, and the program is mine. I have activated these two auto exchanges, but then I have a pool created with loose coins and several protocols of Nicehash and Zpool, but many times I see that I am mining for example hmq1725 when I do not have it selected. Something is wrong, it does not respect the selection of my pools. Like I say HMQ happens to me with any other protocol. Please revise.
This sounds like an issue related to the profit switcher. In the Options dialog, Online Services section, is the setting "Include in Managed Profit Switcher" unchecked for Zpool Neoscrypt? If you right click on the miner and select View Details to see the last number of profit switching decisions, is Zpool Neoscrypt in any of these lists? Could you send me your log file as well (via mail or PM) and let me know the time of the issue and the name of the miner? Thanks! |
|
|
|
Awesome Miner version 5.7.10 ( Development preview of 5.8 )The main feature is the new Mining History, mainly intended for those running Premium Edition and above. For lower editions it will only display the data from the last 15 minutes. You can select one, many or all your miners and then right click and select Mining History to access the new feature. In the next release, planned to be available within the next few days, the Mining History feature will be improved further. You will then also see list of the selected miners, including their avg revenue, avg profit, temperature, mining time for the selected period of time. This will make it easier to find miners that stand out in a good or bad way. To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates. Direct download links if needed: www.awesomeminer.com/download/setupdev/AwesomeMiner.msiwww.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi https://www.dropbox.com/s/6s5ius0fulxjiyw/Captura%20de%20pantalla%202018-11-20%20a%20las%202.25.46.png?dl=0In this information box, my suggestion is that two columns are missing. One to say the amount of changes in that currency, and another to say the miner. So I can see with which miner I am using each coin, and I can see how many times it has had to change in auto profit to get that%, something that is quite important. The knowledge also that I am mining each coin also I see it very useful. I hope not to bore you with my suggestions. Thanks for your nice feedback. I agree that number of profit switching times would make perfect sense to add. Mining software might also be of interest in case you run mixed GPU's where it's not always the same software for a specific coin. I would be a little more difficult to represent in a table, as Neoscrypt 17% might be two different mining software, one 10% and another 7%. Displaying that would make two lines. Maybe there should be some kind of expandable tree in the future, where you see Neoscrypt 17% at first, and if you expand that node you would see Claymore Neoscrypt 10% and Ccminer 7%. |
|
|
|
GMiner CUDA Equihash Miner v1.08 - https://bitcointalk.org/index.php?topic=5034735.0Performance on stock GPU settings: Equihash 144,5: Palit GTX 1070 Ti JetStream 8GB ~ 59 Sol/sMSI GTX 1080 SEA HAWK EK X 8GB ~ 61 Sol/sEVGA GTX 1080 Ti Founders Edition 11GB ~ 84 Sol/sGigabyte 1080 Ti AORUS Waterforce WB Xtreme Edition 11GB ~ 89 Sol/sDownload links: Linux x64 https://mega.nz/#F!HeIHzYDI!Rf3-qpxMjAkeQ7SDeeN2rw Windows x64 https://mega.nz/#F!2GQl0AaR!_YzlNiVNNOUbEqYwz40E8A please add and make GPUs to choose Thanks - Gminer will be included in the next release. |
|
|
|
Awesome Miner version 5.7.10 ( Development preview of 5.8 )The main feature is the new Mining History, mainly intended for those running Premium Edition and above. For lower editions it will only display the data from the last 15 minutes. You can select one, many or all your miners and then right click and select Mining History to access the new feature. In the next release, planned to be available within the next few days, the Mining History feature will be improved further. You will then also see list of the selected miners, including their avg revenue, avg profit, temperature, mining time for the selected period of time. This will make it easier to find miners that stand out in a good or bad way. To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates. Direct download links if needed: www.awesomeminer.com/download/setupdev/AwesomeMiner.msiwww.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
|
|
|
|
Thanks for letting me know. I have received a few requests for this software in the past, but back then it didn't provide any API's. I have also received a number requests for the Gminer Equihash mining software lately. If there are any other software you (I'm asking everyone here) would like to see support for - please reply here. (In the future there will be a separate Awesome Miner forum outside of Bitcointalk where feature voting will be available) |
|
|
|
Hi Patrike,
I have a suggestion for a function I really miss.
In the Coins & Profit / Profit Switching section you have the great option to "Ignore pools with no accepted shares in (minutes)" and the ignore time by.
Can you add the same just for algorithms? So it would "Ignore algorithm with no accepted shares in (minutes)" and ofc the ignore time.
Especially when you use multi pools with the profit switcher. It can happen a coin is on top, but cant be farmed for any reason. But I dont want to ignore the whole pool. Sure, you can set a rule with an alert, but you cant ignore that coin for a specific time.
The feature will only ignore the specific pool/algorithm you are mining on for the specific miner. If Nicehash Neoscrypt isn't giving you any accepted shares after a number of minutes for Miner#1, what will happen is that Miner#1 will ignore the Nicehash Neoscrypt pool, but it may continue on the Nicehash CryptonightV8 pool instead or maybe the zpool Neoscrypt pool as the ignore will not apply for all Nicehash pools and not for all Neoscrypt pools. |
|
|
|
It would be very good if you add to the balance tab the rate of the coin and the exchange on which this course is taken.
Thank.
It's the same exchange as listed for the coin on the Coins tab, but I understand your point that it can make sense to show it on the Balance tab as well. |
|
|
|
new Algo Equihash 200,9 please add
Isn't Equihash 200,9 the same as the classic Equihash algorithm - used for ZCash and many other coins? |
|
|
|
|
Show Posts
