Loving the pro version. Would however like to see better support for Dayun Zig Z1 and also like to see Zjazz AMD for Suqa. Can't get Zjazz AMD to work right using user defined mining software....
Thanks for your comments. Please let me know if there are any specific features on the Dayun miner that is missing? If possible, please send me an API report as well (via the toolbar: Tools -> API Report). Thanks. Zjazz was originally added to get some nVidia based x22i mining software. If there is an interest in supporting it for AMD as well, it could get added as well. Otherwise I think a good option for AMD could be WildRig miner that is supported already.
|
|
|
Awesome Miner Version 5.7.6 ( Development preview of 5.8 ) - Block Explorer configuration for wallet balance to allow balance unit of 1E-7 and 1E-24 to support a wider range of number formats
Thanks for update Patrike. But i think there's still something wrong with balance. For BCD, i set unit of 1E-7. When clicking on test button, i get the correct amount. But in balance tab, amount still appear with a unit of 1E-8. Can you look at this ? Sorry - I will correct that. Thanks for pointing out this issue. Adding a new BCD balance doesn't populate with suggested block explorer API URL any more? How to add BCD balance please? There has never been a predefined Block Explorer for BCD. The URL that was given in earlier discussions wasn't an official API, so I didn't want to include it by default. It should however still be possible to enter manually as a Block Explorer URL: http://20.184.13.116/v2/addr/[address]
|
|
|
really digging Awesome Miner, one small enhancement request here... but can you move the restart and reboot computer options so they're not so close together?
Thanks for your nice feedback. You should get a dialog asking if you really want to reboot - to prevent clicking the wrong button and reboot by mistake.
|
|
|
Very nice, thank you. I run a small farm of Innosillicon A9 Zmasters so if you could do the same for them someday it would be nice.
I would also like to be able to see the same information as I do when I am on the NiceHash website, total profits, estimated profits, etc.
Thanks for your suggestions. For Nicehash, Awesome Miner can display the currently estimated profit when mining (in the Coins column) while mining. Make sure you right click on the miner and select Define Pool Coin and then "Unspecified Equihash". You can also see the balance of your Nicehash account using the Pool Balance feature, configurable in the Options dialog, Balance section. https://support.awesomeminer.com/support/solutions/articles/35000086032-pool-balance
|
|
|
I love AM but wish they would develop more options for ASICs. Most of the options are geared toward CPU/GPU rigs.
I'm very open to feature suggestions and feedback on how to make the ASIC mining features better. I do have a number of requests for making Antminer firmware updates via Awesome Miner, so that's one example of a feature planned for future versions of Awesome Miner. It's true there are a few more features related to GPU mining but that's because it's more complex and requires more configuration. ASIC mining is typically more straight forward and requires less configuration to get going.
|
|
|
Patrike, dasboard need to add an option to change graph limits for each miner hashrate and power usage independently (yes, need to add power usage). Usually the area near zero is not useful. If your miner hasrate changes from 120 to 160 MH/s it is better to cut the 0-100 MH/s area and see the more detailed statistics for 100-180 MH/s area. If 1st miner speed is H/s and the second miner speed is MH/s the dashboard screen becomes fully useless for the first miner. That's why need independent limits for each miner. Sometimes you can not understand the real power usage without seeing statistics.
Thanks for your comments. I do know that the dashboard and graph features are a bit limited at the moment. The idea is to make improvements in this area later on and your requests have been noted as well.
|
|
|
Patrike,
Small issue that I've discovered...
All algo's have been benchmarked with one or many GPU's and I have them all selected in Options > Algorithms.
Now here is the issue, if I deselect one or more and then at a later date re-enable them in Options > Algorithms, the benchmark data is lost / missing in the Benchmark box and I have to redo the benchmark for those algos again.
Can you fix that in the next update please so that the data does not get erased when these are disabled in Options > Algorithms, thanks.
Thanks for reporting this issue. I will take a look at this case. For the moment, you can workaround the issue by doing the disable on the algorithm in the Profit Profile instead.
|
|
|
could you please add selection support for the zpool South East Asia <sea> STRATUM SERVERS and blockmaster European servers (Please access these by using stratum+tcp://eu.blockmasters.co[:port] ) in the next release?
thanks
Thanks for your suggestion. I will add zpool SEA to the next release. BlockMasters EU is already included in the latest development release.
|
|
|
found a bug, @patrike.
automatic download of custom managed software does not work. I can create a custom software and add all the download links, folder & executable names and so on to its properties. but then I can't enable that software in any of my profit profiles. when trying to save a profile with new managed software enabled, AM tells me, that I should click the "Configure" button and specify the path. basically it's locked with "Specify existing installation path" option selected, and I can't choose "automatic download" option at all.
I will take a look at this one - thanks for reporting it. I have another feature in the pipeline where you will be able to use a C# script as a rule action, to set a time limited wallet/worker name on a profit profile. You will be able to run the rule on a schedule you define.
any updates on this? please make me happy thank you for your work. This is implemented already, but not yet documented as it's quite low-level. An example of how it can be used is the following C# script action, but I will have to provide some documentation for it before it's really useful using AwesomeMiner.Components.ProfitSwitching.Pools;
public class ActionScript { private ContextProvider Context = ScriptManager.Context; public bool Execute(List<IMinerBase> list) { // Specify duration for how long the changes should be used const int DurationMinutes = 45; // Pool configuration SwitchingProfile swProfile = new SwitchingProfile(); swProfile.EnabledPools = OnlineServiceType.MiningPoolHub; swProfile.MiningPoolHubWorker = "newuser.1"; Context.ProfitSwitcher.SetTemporaryProfitProfileSettings(list, DurationMinutes, swProfile); return true; } } hello patrike, this script is broken in two last releases. every time I got an empty miner worker name after running it. There is a change in the latest development releses for this. Please remove this line swProfile.MiningPoolHubWorker = "newuser.1"; You can replace it with lines like below. You always need the first "Clear" line, but then you can have one or more additional lines for each pool. swProfile.PoolProviderList.Clear(); swProfile.PoolProviderList.Add(new PredefinedPoolProvider(OnlineServiceType.MiningPoolHub, "newuser.1")); swProfile.PoolProviderList.Add(new PredefinedPoolProvider(OnlineServiceType.BlockMasters, "somewallet")); swProfile.PoolProviderList.Add(new PredefinedPoolProvider(OnlineServiceType.AHashPool, "somewallet"));
|
|
|
- CoinCalculators.io setting for filtering of exchanges will still include coin values for coins without an exchange I can not find this option
Maybe the description in the release notes wasn't too good here. It's not a new setting, but it's refering to when using the existing setting for CoinCalculators.io Exchange Filtering. When enabled, I received feedback that is was filtering away too much coin data where coins didn't have any exchange at all.
|
|
|
Awesome Miner version 5.7.7 ( Development preview of 5.8 )
This is a small update from the development release made yesterday (5.7.6) where a few corrections are included together with updated versions of mining software (CryptoDredge, T-rex, TeamRedMiner, WildRig).
|
|
|
Nice update Patrike. One question. The Power Usage is only show if i set "Distplay Profit in addition to revenue" in the general options. Is it normal or a bug?
Right now Awesome Miner only calculates the power usage/cost if profit calculations are enabled - but that's not very user friendly. So I would say it's a bug and I will correct this in the next release so you will be able to display Power without also showing Profit.
|
|
|
Awesome Miner Version 5.7.6 ( Development preview of 5.8 ) - Block Explorer configuration for wallet balance to allow balance unit of 1E-7 and 1E-24 to support a wider range of number formats
Thanks for update Patrike. But i think there's still something wrong with balance. For BCD, i set unit of 1E-7. When clicking on test button, i get the correct amount. But in balance tab, amount still appear with a unit of 1E-8. Can you look at this ? Sorry - I will correct that. Thanks for pointing out this issue.
|
|
|
Thanks - I will include those in the next update.
|
|
|
Awesome Miner Version 5.7.6 ( Development preview of 5.8 ) Features - Significant speed optimizations for the Performance History feature - Performance History also includes estimated revenue and profit - Performance History export to CSV allows selection of data to export - The profit switching setting to ignore pools with no accepted shares can now be configured for up to 20 minutes (was 10 minutes previously) - Diagnostics includes information about MS VC++ runtime versions installed, as these runtimes are required by some GPU mining software Integration - Block Explorer configuration for wallet balance to allow balance unit of 1E-7 and 1E-24 to support a wider range of number formats - New algorithms added to the predefined Yiimp-based pools will automatically be available if the algorithm is known to Awesome Miner - BlockMasters pool configurable for region - Mining Dutch Lyra2REv2 profit unit adjusted to latest API changes - CoinCalculators.io setting for filtering of exchanges will still include coin values for coins without an exchange - Siacoin algorithm changed from Blake2b to Sia, which is a modified version of the Blake2b algorithm API - Added HTTP API for returning the assigned miners and users accounts for each user group (/api/groups/details) - A random HTTP API key can be generated with a button click in the Options dialog Rules - Triggers looking at hashrate and accepted shares can now be configured for looking back at statistics for up to 20 minutes (was 10 minutes previously) - The predefined trigger for Accept Progress will by default be set to 16 minutes (was 8 minutes previously) on new installations User interface - Display of power usage per miner group and as a total for all miners. Configurable via the Options dialog, General section. - Display of power usage for the selected Profit Profile on the Coins and Online Services tabs - Improved user interface for configuring predefined pools for the profit switcher and for custom wallets for miners - Additional coin images added Mining software - CryptoDredge 0.9.6 - T-Rex miner 0.7.3 - Z-enemy Miner 1.23 Corrections - Improved detection of nVidia GPU driver version - Correction to scenario where user defined Online Services are being removed, to ensure no old statistics are listed on the Online Services tab - Correction to the Profit Profile properties, Override section, where the feature to add a new custom pool didn't work correctly in some scenarios - Correction to profit switching with TeamRedMiner where the pool changes wasn't performed correctly - Minor corrections To get access to development versions, open the Options dialog in Awesome Miner. In the General section, enable Check for development versions. Then go to the Menu and click Check for updates Direct download links http://www.awesomeminer.com/download/setupdev/AwesomeMiner.msihttp://www.awesomeminer.com/download/setupdev/AwesomeMinerRemoteService.msi
|
|
|
Hi Patrike,
i think there's a big problem with PHI2 algo, profit switching doesn't work, and "phi2 pool Block Masters" there's on tab "Online Services", but there isn't in "View Detailts - Profit Switching".
P.S. I'm using Teamredminer!
Bye
Awesome Miner is automatically showing all new algorithms on the Online Services tab, but doesn't automatically add it as a pool to the profit switcher (see Options dialog, Online Services) until I include it in an update. This implementation will soon change where Awesome Miner automatically will make new pools (from the predefined yiimp-based pools) available without having to update to a later version. Edit: I just checked and BlockMasters Phi2 should be in the list already. Is Phi2 selected in the Profit Profile you are using? Do you have any mining software that supports Phi2 enabled in the Profit Profile? Hi Patrike, i don't know why sometimes the profit switching doesn't work, but if i restart the miner, AwesomeMiner choose the right algo/coin to mine, i have only problem with phi2 algo. This is a screenshot of View Details https://drive.google.com/file/d/1Sxiq8hCGlgi48Sgo-0ODU-AoesdWqL2Z/view?usp=sharingThanks I wonder if this could related to the Threshold setting not working as it should. Your 5% limit should have been passed in this case and a pool change should have been made. Do you get the same issue if you disable the Threshold feature? Next time this happens, could you please send me your log file by mail and let me know the time of the issue - together with a good screenshot like the one your provided here? Thanks! Mail to info@awesomeminer.com with new screenshot and log file. Thanks Thanks for sharing the logs. I've implemented a correction for this scenario with TeamRedMiner.
|
|
|
@patrike - Please check Sia coin. Its getting $0 value from whattomine. The algo being reported is "Sia" from whattomine now.
Thanks - I will adjust Awesome Miner to this algorithm change.
|
|
|
CryptoDredge 0.9.6 Nvidia Miner With Support for the X22i Algorithm New z-enemy 1.23 Miner With Performance Optimizations for RTX 2080 and 2080 Ti
This will be included in the development release that will be made available soon.
|
|
|
Hello @patrike, only as a reminder
For when Shit to mine as another coin supplier.
You will incorporate the possibility of choosing Exchange in the currencies. This I mean the exchanges that gives us for example Coincalculator. For me this is quite important, undermine the real price of where I'm going to sell.
I believe fervently, that a logical and big step would be for AM to get the data the same pages as always including Shit to mine, but then the prices get them separately through the APIS, just as AW CU does. In this way the data provider of currency will be the same, we can always choose the exchange. I do not say that it is easy or quick to do, but this would be a totally logical feature and that does not have the other programs. Apart it is very useful for the miner.
Another question Which is better for WTM to give an example. That thousands of computers with AM ask for data every few minutes, saturating their servers, that you get the data once per minute and provide it to us, obviously I suppose with the monthly subscription. Whenever it is mentioned that the currency is provided by WTM there will be no problem. Have you thought about it in this way to WTM and other coin providers ?, They will save on bandwidth and CPU of their servers, and you would give us a faster and closer value, and also complement their payment services.
This is like the subject of more detailed statistics. The day that you add in your payment services, price data every minute and much more complete statistics, then, me and thousands of other people, we will have to subscribe to your monthly payment services, I sincerely love it, and I think that It is a good for all, better data, prices and statistics, I therefore if I pay.
I am aware that I am asking for things that are a little bit outdated and that I have to adjust a lot of code and contact to negotiate with the data providers. But really those possible new features would make a huge difference for good in the use of the program and could distance even more from the competition
I've been in contact with the ShitToMine about the API, but I don't know what it will look like yet. Once it's made available I will of course consider making similar exchange-configuration as for CoinCalculators. If I could decide myself how the coin statistics would be downloaded to Awesome Miner, I would like to have it centralized via the Awesome Miner cloud. As we discussed earlier the main issue here is that I don't own the data and I will have to discuss with the admin of these coin stats if it would be acceptable. There will be some improvements to the mining statistics in Awesome Miner during the next few weeks.
|
|
|
Please make sure Graft is on CryptoNight v8 in next release!
I think Coincalculators and WhatToMine recently updated this so it should have been updated automatically in Awesome Miner as well.
|
|
|
|