everyone crazy about higher power consumption on this driver, but it has nothing to do with the driver, it's that you can not change the voltage with the current overclocking software  |
|
|
|
I just tried them and the signature check fix doesn't seem to work anymore.
It works, cause all it has to do is remove the little yellow triangles from the system/devices part, and not to allow you control fans/voltage/etc..  |
|
|
|
The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.
Robinhood's version is working better for me I mean, after installing the official drivers on win7 x64 screen either goes black, or claymore crashes. And the download size of those is 600mb lol. So robinhood version is working on win7 x64 ? It is |
|
|
|
Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher
All win 7 user has this issue?? It's not the Windows 7 driver. The problem is they are using the 'Windows 7 6 GPU mod' hack that hasen't been updated for over a year, then they wonder why they have problems. LOL I have 3 gpu on my home computer, so no, it's not the 6gpu hack that is the problem. |
|
|
|
The driver version robinhood shared is 22.19.659.0 and 22.19.659.1. So it was legit after all.
Robinhood's version is working better for me I mean, after installing the official drivers on win7 x64 screen either goes black, or claymore crashes. And the download size of those is 600mb lol. |
|
|
|
You can use Afterburner 4.4.0 Beta 16 to control voltage on the dag fix drivers. If not working, try the latest Trixx. One of these should work |
|
|
|
Help pls i tried to install the driver everything went fine but when i restart it my screen goes black
I have a windows 7 and i used the ddu also the patcher
All win 7 user has this issue?? Looks like. I went back to robinhood drivers,they work on win7. |
|
|
|
6 card ETH rig went from ~139 MH/s ====> ~146 MH/s 6 card UBIQ rig stayed the same at ~145 MH/s, so the drivers do work to fix the epoch hash issue! I used DDU to uninstall the drivers in safe mode and had to apply the pixel patcher to bypass the signature check. Also needed to use AB Beta 16 to be able to set the undervolt and clocks. so when working, everything is same like with robinhood's driver. |
|
|
|
reboot again... i install on win7 before that ddu.
apply atikmdag patch.
reboot.
before going into windows, screen is black, and that's it.
and again and again and again |
|
|
|
|
i install on win7 before that ddu.
apply atikmdag patch.
reboot.
before going into windows, screen is black, and that's it.
|
|
|
|
|
driver released on amd site, called blockchain workloads fix
|
|
|
|
I don't know, try it and tell us  |
|
|
|
it doesn't matter if 4gb or 8gb, all of my cards are affected, but after applying this let's call it beta driver, everything is back to normal. Oh, and im not talking about the vega drivers, but the ones from the 1st page |
|
|
|
This driver is legit.
I run 6x RX480 Sapphire Nitro+OC 8GB cards. I get about an 8 Mh/s increase with it, from under 160 Mh/s to 168 Mh/s, dual mining with Claymore ETH and Siacoin.
I run a custom bios on all of them that has the 1750 timing straps copied to the 2000 and set the CPU downclocked to 1125Mhz.
I use a monitor emulator dongle and WattTool to drop the voltage -16 (100mv) and currently run the cards at 2070 Mhz.
I was previously only able to get 2050 Mhz before stability issues occured (daily hangs or reboots.)
Total power consumption as monitored by HWinfo/Corsair AX1200i is about 1000 Watts, so no increase in power draw.
HWInfo GPU memory errors are minimal and within acceptable range.
Wattool not working with these drivers, and probably won't work anymore even with official AMD drivers, if they leave the ADL as it is now on this beta. Wattool is not updated anymore, a long time ago. |
|
|
|
Claymore if you see this, someone alerts you to this, OR this has already been hashed out and fixed (my apologies I haven't read through the 700+ pages yet, working on it).
Cards with the 9000gbps OC'd memory, notably the 1060 Gaming X+ (I don't know if AMD cards have the same issue), seem to hash slower than their peers with the non OC'd mem.,
Any reasons to why they are under-performing would be greatly appreciated! Some speculation was that the OC'd mem isn't able to be processed/accessed properly whether by the mining software or OS, etc.
Also with most users they report GPU load at 58%, 60%, 80%, but never more - even when power limit increased to 110%.
Thanks in advance!
try making the card go into p0 state by turning off p2 state forcing on driver level. |
|
|
|
@baracuda yeah well that did solve my issue for that 1 GPU at least @Munhenhos i bought for those GPUs a Server PSU with 2400W i think this should be enough for 6 GPUs or am i wrong? for now, the only thing left for me to do is to get claymore to work with 6 GPUs in Win10 without the AMD Driver not installing properly. Kudos for the great program doktor83! With Regards I am glad it sorted out for you in the end  |
|
|
|
We will just have to wait for the original AMD driver, and that's it. If the new AMD driver will really fix this DAG issue then this driver is 99% a legit beta. If not, well.. then we got punkd |
|
|
|
The latest version of SRB PolarisV3 was recognized by Windows Defender to have a Trojan "win32/fuery.B!cl" in the SRBPolaris.exe file. See this image file for details: http://imgur.com/ybJ2DcmOP: can you please explain why you are inserting Trojan file in your program? Admins: please flag this program, as it may contain Trojan files. Sorry but no trojans in the program. Now go back to your cave please. Hello doktor83, I went back read through the thread. Apologies, I will delete my post. However, I am still not able to use this tool, as it asks me to install .NET framework 3.5 and the install fails giving me an error code 0x800f081f. Please see the screenshots ( http://imgur.com/a/D4oQu). Can you please advise how to fix these errors and use this tool. FYI, I am using Windows 10 OS on my mining machine. Thanks. Download .net 3.5 offline installer from microsoft site, and install it, that should help. |
|
|
|
|
Sorry guys, don't know what to say other than don't use it if you think it contains a virus.
And frozentear its nice to see you only registered just to warn people, you are a hero lol.
|
|
|
|
|
Show Posts
