Thanks for the info. Looks like ill give it a try. One more question, is it possible to manage the miner trough awesome miner app?
Yea but it's limited.... I watch with Awesome miner ....
|
|
|
not me for the rigs but do for my router , switches or what is not mining the coins direct ...I Guess because my miners are on a 220 line and gonna have at least one more 220 put in by the end of the summer if not two ..then my 200 amp service will be maxed or to the max i want to take it .
|
|
|
Well I just purchased the standard edition for my 4 miners mining Zcash, and..... NO ZCASH profile like your website showed. It just shows a yellow circle with EQH in it and "Unspec. Equihash. NO Zcash? Really? Why do you show it on your website? It will not give me the Per Day or Per Month calculations as "unspecified".....
you have to change the coin type from Unspec. Equihash to Zcash(zec) by selecting pools then look for a link that says define coins. and when you setup that managed miner , make sure to set the Algorithm to Equihash and not Unspec Multi-Algorithm .... and OFC use the right software that works with you video card.
|
|
|
Hey patrike
I haven't posted in while because no issue but I have one. I'll try explain as best i can ...
I have a 5 cards 4 are AMD cards and one is a NV GTX 1060 card and I'm mining Zec, i have to use CM 12.5 for the AMD cards and for the GTX 1060 i have to use EWBF's Zcash cuda miner.
The Problem is If I use the Map System Monitoring it shows the GTX 1060 as a AMD card on device 0 which the AMD card is on device 0, is there a way to make AWESOME miner Show the GTX 1060 card as a GTX 1060 ..i have to load it by it self because CM 12.5 Zec miner doesn't support NV cards ...and EWBF shows it as Device 0 when it's device 4 and sense it does awesome lists it as Device 0 which makes it think the gtx card is a AMD card ... but if i look at the list under the Maped system it shows the NV card as device 4 and as a GTX 1060 ... i think i explained right ...
|
|
|
I'm sure you are working as hard on this as you can, but I'm curious. Is there an launch date set for the Linux OS yet? apart from just in the summer of 2017? Keep up the good work! linux client alpha is ready. you can sync with the website. linux os is a little bit harder i want to create an easy gnome. (lightdm) few click setup. graphics interface. all in one at 1 dashboard. gpu info, temps, configs you can switch miner or edit your config with just few click. it will be the easiest os for mining. anyone can use it without any knowlege, with nice UI. after i publish the v3.0 client to windows, i will open a bug tracker and an option to get into the alpha test before release. meanwile i will open minerstat pools with low fees about 0.3%-0.5%, but the pools are just optional, you can use what you want. so it takes time, im the only 1 who develop this software, i havent got any help IL help test that i have two rigs atm and working building two more and found LINUX is more stable then windows for me with 3 or more cards .
|
|
|
Lol yes is 100% real i don't know what the other guy is saying . well if your interested propose a price lets see what you have to offer .
your a newbie and anyone in there right mind wouldn't buy it out without some form of money back protection, off a newbie because of really bad ripe off deals in the past ,,,,it wasn't nothing personal , I'm sure of that ....and 10 k can be a lot to some, so i guess my point is you have to expect that type of comment till you build trust .... why to pay 9000$ for two used pieces when on bitmain.com a single antminer L3+ costs new 1291 USD and they ship worldwide??? I'm guessing hes betting on you can't wait . 10k for 2 L3 + is a bit much, you can buy one on ebay for 5k and that's to much....and may even get free shipping depends were it comes from ... Last time i looked the Bitmain orders are pre orders ship date end of July or some thing like that .... Antminer L3+, 504MH/s Shipping: Aug 28-Sep 12
|
|
|
still no cables , I need 4 of the 30” PCIe to EPS adapter assembly with barrel jack pig-tailed for powering Pico PSU (shown WITH Pico PSU connected, not included) - $5 OUT OF STOCK ....
and maybe
2 of the 160W Pico PSU 24pin ATX adapter - $20 each , i know we talked in PMs just thought id add to the public list...
|
|
|
nope not me, I'm not gonna touch them ..I'll keep doing it how i am now ... unless they put PCI plugs on Ver 7, i won't be using it .... for safety reason... I use one cable off the PSU to the PCEI and Spit it with http://www.ebay.com/itm/361651807884?_trksid=p2060353.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT after i found out how unsafe it might be using any thing but PCEI plugs with AMD or NV cards . and like it a lot better more room, one or two less cables with a lot plugs on the cable to use that was getting in the way ...
|
|
|
2.10 still doesn't do much on sites like Zpool , litecoin pool or Prohashing.com .. it works great on nice hash but I don't care much for nice hash .. and it is the same issue, it show it mining at 137 to 138 MH miner side and on the POOL side on some pools it some times only goes as high as 120 to 128 never a good sable 138 or close, on Zpools it sets at 80 to 84 MH pool side but in the miner on the UI it shows every thing working fine and Ming at 137 to 138 MH steady but sense i can mine Zcash on Zpool and get paid in Zcash, without using GPUs but can't, i hope it stays that way but from time to time it's nice to get paid in that coin even if your not really mining it with a script miner i know that.. or get paid in any coin they support with any miner type which lets me use old miners if i want to like my A6 ...which lets me also justify using my A6 and that A6 has a second wind use for a while longer. Just asking ? ...... any big fixes coming any time soon for the Poolside hash rate issue on some pools or does that need to be another more up to date re flash of the boards like jstefanop did here https://archive.litecointalk.org/index.php?topic=27370.0 for the AlcheMiner/MAT Miner that was having the same issue till he fixed it, will the A4 see a even newer updated to make it more stable and if so when will that happen .... I know i still own and use one of the AlcheMiners .... and the fix for the A4 now doesn't seem to work for all pools like his did for the A256. Again if I use my A4 on Nice hash with 2.10 no issue so far , it's on other pools, i have the low hash rate issues with any version....of the miner software....
|
|
|
I am waiting for
LINUX OS, COMING SOON!
not the app you have now, if you happen to notice, i don't use my account much I use ethos on my three four card RIGS and on my two PC with single cards for every day use , i use windows and don't care much for any of the LINUX desktops but love there server version and found out using LINUX on Rigs with 3 or more cards is much more stable then windows ... for me ,,, i know some use windows and not taking a way from it , i just don't have the patience, i use to any more.. and just want to set it up fast and have it boot every time at the same setting on a 16 GB SSD etc ....without adjusting a lot of shit to make it run stable ..... at one time i didn't mine, but do now .
|
|
|
is the Biostar amd am 4 MB on sell yet anyplace in the US for mining, i want one ........I know deep in the mines said they may have some this week, i think to morrow ....but 150 bucks plus shipping for a 80 dollar board... I'll keep watching ....
|
|
|
Whats it Do? I lowered it to 4, I still get the hasrate as before.. What do I loose by setting it lower? On claymores miner.
Lowers the power usage and speed, over time, in other words it does what the name says takes off stress with less intense abuse, and suppose to make the card run more stable as you lower it ... I can confirm it does lower the speed and power usage over time, as the intensity is lowered or you can look in the read me it explains it some what better then i do ..
|
|
|
keep them mining till they stop and if there still under warranty I'll get them fixed or replaced and mine more, i all most never sell anything, to much trouble.
I'll ware it out first .
|
|
|
I recently tried setting up another mining rig but found out all the profitable GPUs are no longer available at all local stores in my country. According to the distributors, people have been buying GPUs in BULK since April 2017.
At this rate, can GPU mining still be profitable long term? 1 year from now? 3 years from now?
It's been going on for years just when you think GPU mining is DEAD, A new coin comes along and keeps it a live maybe not right a way but has sense it all started with BTC . so to answer your question ... it may never end for GPU's and switch to a new coin ..If all the coins mined now some how become Useless Or hard to mine with GPU's ..... there maybe a down time point in between coins but it won't stop unless every one completely gives up on GPU's ... which won't happen any time soon.... Same, kind of with some Coins you can mine with CPUs .
|
|
|
|