thanks for hard work please AMD very important, add amd support under windows you king man
|
|
|
Guys, how much MHs of hashrate should i expect with Phoenix miner for single Gtx 1070 gpu without overclocking and memory pills?
I have an evga gtx 1070 ftw3 and I just tested here for you, it says 29mhs with overclock +110 core, memory +400, power limit 74, in the past as i remember used to be 31mhs with power limit 55. It seems that every dag closer or after 4gb the speed is reduced and reduced. So if for mining, I would not recommend this gpu, for gaming is great, I can play most games at 4k with low or medium visuals, this card is 4 years old, amazing. Yeah agree with you. my 1070 gaming x was doing 33mhs easy now im lucky on 31.5mhs. gaminx uses too much power like 160-170w.i never increased core, instead i used -100 memory +600 pow 75
|
|
|
What else programs are you using? amdmemtweak, overdriventool? tell all your system and progs you are running with?
atiflash gpu-z polarisbios editor atikmdag msi afterburner for mining claymore ok all looks good,virtual memory enough? if it is try download miner from official source, run with admin if doesnt work close miner restart again, if it gets fixed then you got something like virus stuff, need to reinstall windows again, it happened to me also this. good luck
|
|
|
looks like 65 % going to use if clay is back. waiting for amd cards? thanks
|
|
|
they will be hot in your pc case. if you open cover will be good heating the room but if they plugged too close to each other they will be hot.
|
|
|
What else programs are you using? amdmemtweak, overdriventool? tell all your system and progs you are running with?
|
|
|
Hello fellow miners. Some of you can remember me from HSRMINER Neoscrypt Fork by Justaminer. I've updated that miner, added new features and fixed bugs without access to source code. I like Claymore's Eth miner much and used it many times in 2019/2020, so it's sad for me to see this situation. I decided to see what can be done to solve the problem. After two weeks of researching and hard work, the solution is 99% ready. I call it " More Epochs" mod for Claymore Eth Miner v15 for Windows. For now mod supports only Cuda 8 version of the miner and increases number of epochs up to 500. Support of Cuda 10 version of the miner, Linux version of the miner and support of Amd gpus will come later (not sure about Amd for now as I don't have any of amd video card right now for research and testing). I'm doing final tests, right now my mod works with -eres 2 which means epoch 386 for Dag buffer. But I have to wait actual epoch 385 to check it there. If everything will be fine, I'll release the mod and will create separate topic for it. Don't lose hope and stay tuned. sounds great. looking forward to see claymore working again, please add amd support too, i dont have nvidia cards.
|
|
|
good people please tell me how you manage get high speeds on this hiveos? im getting 19mhs with rx570 8g. oc set to 1150 core 2050 memory.
I think you will need to flash the bios of RX570 that has custom strips before you can able to mine with around 30mh/s on etherium mining. thanks for reply. Is there another way to get 30mhs like used to do in claymore strap thing? no modding the bios. if i flash my cards on hiveos will it remain permanent?
|
|
|
good people please tell me how you manage get high speeds on this hiveos? im getting 19mhs with rx570 8g. oc set to 1150 core 2050 memory.
|
|
|
hello, since the last update, my gpu memory setting no longer works,
here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0
Mclock 4500? what card is that? 1070 ti nvidia cards you have to write -mclock +400 for increase +400. amd cards uses direct numer like 2150.
|
|
|
hello, since the last update, my gpu memory setting no longer works,
here is my .bat: PhoenixMiner.exe -pool eth-eu1.nanopool.org:9999 -wal 0x24kndflog2588dlE288CA7eF03b627D0C78758426.pc -powlim 75 -mclock 4500 -log 0
Mclock 4500? what card is that?
|
|
|
TRM is also good miner, i got good speeds and share on kawpow but on eth mining i was unlucky, here nobody helped to adjust trm for eth. ofcourse if your cards modded then it works good i really dont like idea modding bios 1 by 1 it is old school. will be very cool if trm can add core memory and voltage control and most important strap injection, write all of this in bat file and run it no need for AB or overdriventool. for me overdriventool makes my rigs unstable i dont know why i must give more voltage on ntool, many crashes with ntool. please developers give us this. thanks
|
|
|
is it Win 10 64bit? if yes then start bios, make all pcie settings gen 2.0 or even gen 1.0 enable 4g decode. Make virtual memory 40-50-60gb.After that add cards 1 by 1. 1.2.3.4.5.6. if still problem not resolved test your riser 1 by 1.
|
|
|
Claymore was the best in how introducing miner. he wrote clear manual and read me file with examples and showed all commands. Some of the miners even they dont have all command list. you have to ask. With claymore you only need miner file drivers and windows thats it. Why claymore left us
|
|
|
These miner are good i agree but non of them supports strap option, some of them even dont have OC support you must use AB or overdriventool. i used write bat file run it no other tools no need. please miner DEVOLOPERS ADD TO YOUR MINERS STRAP AND OC THATS ALL MINER NEEDS.
|
|
|
From Coindesk:
The Ethereum network’s directed acyclic graph (DAG) – a component of Ethereum’s PoW algorithm called Ethash – stands at just under 4 gb, while each Linzhi Phoenix only has a 4.4 GB memory. The incumbent A10, on the other hand, can house between 6 and 8 gigabytes, F2 Pool says.
So, it only has 4.4GB.. Its been mining for years then if that's the case, they wouldn't build that in 2020 with that small amount of RAM.
they tipped their hands with the 4.4 gig ram lol, these machines are years old obviously Yep it is old and was mining till now secretly, they did not sell it to public because it was profitable for them to mine also it could make scandal. i told before more scary part is what they using right now? what speed what asic? eth is last coin which brought us some money after they kill it i dont know mining will be dead too.
|
|
|
So what is the point of this vote? if it gets most votes we will get new version claymore? im not expert if there anyone who understands these codes is to difficult to implement claymore miner? all other miner non of them not supports strap,some of them even dont support OC, you have to use AB or overdriveN. im used to write all in bat file and keep running always even restarts same settings no need for bios mod or sitting and adjusting OC.Claymore did it 1 year ago and it was awsome. PLEASE IF ANYONE THERE TO DEVELOPERS OF MINER JUST ADD STRAPS AND OC SETTINGS THATS ALL MINER NEEDS. AND GOOD README FILE.
|
|
|
albornoz albornoz albornoz dude arent you tired keep posting these scam posts???
|
|
|
1 way to be sure plug wattmeter and read what you get from the wall. Sometimes even bios version can show different watts on screen. thats why you need measure it from the wall.
|
|
|
I believe its real, now we are finally started to see people were mining 2 years ago, most scary part is what they are secretly using right now? many asics are awaiting for 4gb ends so new asics will join in. Ethereum should kick these asics away but they dont. Asic only profitable if you are manufacturing it otherwise you will make little money if you are lucky, who wins? = people who sold it to you.
|
|
|
|