Dear miners please do not support these ASICS. Ethereum last profitable coin left out there which we can mine, and so this last coin will be wasted.
|
|
|
i think 3060 and 3070 will be favourite card for miners. ofcourse lets see what surprise AMD has for us......
|
|
|
Running that mobos from asus b250 mining expert. never had issues, using celeron g3930. 8g ram 2133mhz and 120g ssd. unplug everything only leave mobo cpu ram and connect hdmi to monitor maybe change monitor, different monitor and different hdmi cable. if mobo is new and cpu working it should give post.
|
|
|
Try use only risers. you can keep x16 slot one card others on risers. if you can try 1 by 1. but sometimes amd drivers will fail that way. after windows shows all your cards remove drivers using ddu in safe mode then install amd drivers back. if you plug botsh x16 slots you may have trouble. because x16 uses alot lanes, thats why use all with risers. good luck
|
|
|
please miner freinds help to set up my rig. im new in phoenix miner. my cards running slow especially rx570 giving 26mhs. it was giving 30mhs on claymore. here is bat file, what can i add and remove. Thank you everybody.
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E -pass x -proto 4 -stales 0 -cclock 1170 -cvddc 920 -mclock 2070,2070,2010,2070,2070,2070,2070 -mvddc 920 -mt 1 -mi 11
1) You should download the soft amdmemtweak(cli version). Put soft to the same miner folder and right-click at the application->properties->compatibility->click run as administrator. 2) put the command: "amdmemtweak.exe -i 0,1,2,3,4,5,6 -ref 30" under the command "setx GPU_SINGLE_ALLOC_PERCENT 100" 3) Otherwise you should lower cclock to 1140/1150 (for 570.8gb) or 1100 (for 4gb cards); cvddc lower to 830-875; mclock to 2025; mvddc to 810-830. Hope you have desirable hashrate with low power. Thanks for help All cards are 8g. REF 30 only giving 480 30.5Mhs and 570 giving 26.5Mhs, it is too low compared to claymore. if i go below 920volts my cards crashes or i get alot incorrect shares. 2060-2070 memory i best i can get till now. How people get 800mv and run these cards? there must be something i missed, Claymore not working anymore and no updates from him. Phoenix how i can get good results? How? AMD mem tweak does the job if you play with timings but im not expert in timings, how to set timing on AMD mem tweak? i tried get straps from claymore and i got them. but as soon as i apply it rig crashes restart.
|
|
|
please miner freinds help to set up my rig. im new in phoenix miner. my cards running slow especially rx570 giving 26mhs. it was giving 30mhs on claymore. here is bat file, what can i add and remove. Thank you everybody.
setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -pool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -wal 3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E -pass x -proto 4 -stales 0 -cclock 1170 -cvddc 920 -mclock 2070,2070,2010,2070,2070,2070,2070 -mvddc 920 -mt 1 -mi 11
|
|
|
Working just tried -mt 1 but not very good results 480 makin 29mhs and 570 making 25mhs. my total rig with claymore was 217mhs now with phoenix 199mhs.
Why don't you mod your bios? I know its not bad option but i liked the way keeping stock bios. Since Claymore V14 i liked it, inject straps on the fly. and after restart again stock bios. AMD mem tweaks allows to do it but i couldnt find yet for RX cards.
|
|
|
Looks like it is time say goodbye to Claymore. Thanks for many years for miner. i moved to phoenixminer works good but cant get hashrates like in claymoe, i will appreciate if someon can share AMD mem tweaks for RX470/480/570/580, Thanks everybody
|
|
|
... Mr Phoenix please improve miner like adding strap option.
How about reading the documentation? It is all there. dont work on amd card -mt options with error Working just tried -mt 1 but not very good results 480 makin 29mhs and 570 making 25mhs. my total rig with claymore was 217mhs now with phoenix 199mhs.
|
|
|
thanks for response.
So what about this dag issues? Anyone? help to survive? looks like no one has problem with dag file
Use right drivers. F.e. 20.4.2 Thanks a lot. working but it is very lag. claymore i was getting 217Mhs now with phoenix 199Mhs, better than nothing
|
|
|
thanks for response.
So what about this dag issues? Anyone? help to survive? looks like no one has problem with dag file
|
|
|
No idea whats going on but im getting this errors with 8gb cards virtual memory set to 150gb. Any help appreciated. thanks
02:21:05:510 162c AMD Cards available: 7 02:21:05:510 162c GPU #0: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 3:0:0) 02:21:05:511 162c gpu 0 max alloc size is 4048 MB 02:21:05:511 162c GPU #0 recognized as Radeon RX 480/580 02:21:05:512 162c GPU #1: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 9:0:0) 02:21:05:512 162c gpu 1 max alloc size is 4048 MB 02:21:05:512 162c GPU #1 recognized as Radeon RX 480/580 02:21:05:513 162c GPU #2: Ellesmere (Radeon RX 570 Series), 8192 MB available, 32 compute units (pci bus 10:0:0) 02:21:05:513 162c gpu 2 max alloc size is 4048 MB 02:21:05:515 162c GPU #2 recognized as Radeon RX 470/570 02:21:05:515 162c GPU #3: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 11:0:0) 02:21:05:516 162c gpu 3 max alloc size is 4048 MB 02:21:05:516 162c GPU #3 recognized as Radeon RX 480/580 02:21:05:517 162c GPU #4: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 12:0:0) 02:21:05:517 162c gpu 4 max alloc size is 4048 MB 02:21:05:518 162c GPU #4 recognized as Radeon RX 480/580 02:21:05:518 162c GPU #5: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 13:0:0) 02:21:05:519 162c gpu 5 max alloc size is 4048 MB 02:21:05:519 162c GPU #5 recognized as Radeon RX 480/580 02:21:05:520 162c GPU #6: Ellesmere (Radeon (TM) RX 480 Graphics), 8192 MB available, 36 compute units (pci bus 14:0:0) 02:21:05:520 162c gpu 6 max alloc size is 4048 MB 02:21:05:521 162c GPU #6 recognized as Radeon RX 480/580 02:21:05:521 162c POOL/SOLO version 02:21:05:521 162c Platform: Windows 02:21:05:644 162c start building OpenCL program for GPU 0... 02:21:06:000 162c done 02:21:06:205 162c start building OpenCL program for GPU 1... 02:21:06:546 162c done 02:21:06:751 162c start building OpenCL program for GPU 2... 02:21:07:089 162c done 02:21:07:293 162c start building OpenCL program for GPU 3... 02:21:07:631 162c done 02:21:07:836 162c start building OpenCL program for GPU 4... 02:21:08:180 162c done 02:21:08:385 162c start building OpenCL program for GPU 5... 02:21:08:724 162c done 02:21:08:930 162c start building OpenCL program for GPU 6... 02:21:09:266 162c done 02:21:09:514 162c GPU #0: algorithm ASM 1 02:21:09:586 162c GPU #1: algorithm ASM 1 02:21:09:672 162c GPU #2: algorithm ASM 1 02:21:09:724 162c GPU #3: algorithm ASM 1 02:21:09:787 162c GPU #4: algorithm ASM 1 02:21:09:850 162c GPU #5: algorithm ASM 1 02:21:09:908 162c GPU #6: algorithm ASM 1 02:21:09:909 162c cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices 02:21:09:909 162c No NVIDIA CUDA GPUs detected. 02:21:09:910 162c Total cards: 7 02:21:09:910 162c No NVIDIA cards in the list, NVML library will not be used. 02:21:09:912 162c Driver version: 0x802 02:21:09:996 162c driver init ok 02:21:10:147 162c GPU# 0 strap "POL8S1" is applied successfully, mclock 2060MHz 02:21:10:149 162c GPU# 0 -rxboost option is applied successfully 02:21:10:310 162c GPU# 1 strap "POL8S1" is applied successfully, mclock 2060MHz 02:21:10:311 162c GPU# 1 -rxboost option is applied successfully 02:21:10:460 162c GPU# 2 strap "POL8H1" is applied successfully, mclock 2010MHz 02:21:10:462 162c GPU# 2 -rxboost option is applied successfully 02:21:10:616 162c GPU# 3 strap "POL8S1" is applied successfully, mclock 2060MHz 02:21:10:617 162c GPU# 3 -rxboost option is applied successfully 02:21:10:780 162c GPU# 4 strap "POL8S1" is applied successfully, mclock 2060MHz 02:21:10:781 162c GPU# 4 -rxboost option is applied successfully 02:21:10:928 162c GPU# 5 strap "POL8S1" is applied successfully, mclock 2060MHz 02:21:10:930 162c GPU# 5 -rxboost option is applied successfully 02:21:11:083 162c GPU# 6 strap "POL8S1" is applied successfully, mclock 2060MHz 02:21:11:084 162c GPU# 6 -rxboost option is applied successfully 02:21:12:240 162c SSL: Imported 36 certificates from local storage 02:21:12:251 9a4 ETH: Stratum - connecting to 'daggerhashimoto.usa.nicehash.com' <172.65.223.147> port 3353 (unsecure) 02:21:12:278 9a4 sent: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}
02:21:12:278 9a4 sent: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}
02:21:12:278 9a4 sent: {"id": 2, "method": "mining.authorize", "params": ["3KPDtEhehBkrgKbXhTx4pZ86n8hgbNyy4E","x"]}
02:21:12:278 9a4 ETH: Stratum - Connected (daggerhashimoto.usa.nicehash.com:3353) (unsecure) 02:21:12:341 162c No pool specified for Decred! Ethereum-only mining mode is enabled
02:21:12:344 162c ETHEREUM-ONLY MINING MODE ENABLED (-mode 1)
02:21:12:344 162c ETH: nicehash stratum mode 02:21:12:345 162c "-allpools" option is set, default pools can be used for devfee, check "Readme" file for details. 02:21:12:346 162c Watchdog enabled 02:21:12:346 162c Remote management (READ-ONLY MODE) is enabled on port 3333 02:21:12:347 162c
02:21:12:348 162c You did not specify -dcri values directly, so they will be detected automatically 02:21:12:348 162c Automatic detection of best -dcri values started, please wait...
02:21:12:664 9a4 buf: {"id":1,"error":null,"result":[["mining.notify","79883f017b100ce104f9fc453eee3533","EthereumStratum/1.0.0"],"22edd5"]} {"id":5,"result":true,"error":null}
02:21:12:664 9a4 remove first packet 36 02:21:12:675 9a4 buf: {"id":2,"result":true,"error":null} {"id":null,"method":"mining.set_difficulty","params":[0.620119]} {"id":null,"method":"mining.notify","params":["00000000666f4640","24a739dd7e88652c7b9c8b21ab1ea88a6a1bc824232e6ffb030387c1518290d7","d20ac47b7f2027c2fe70db241e1ee19c3ba0f375ef832e4912b8b8de5e6b62cb",true]}
02:21:12:675 9a4 ETH: Authorized 02:21:12:676 9a4 remove first packet 271 02:21:12:676 9a4 remove first packet 206 02:21:12:737 14ac Setting DAG epoch #379(3.96GB)... 02:21:13:222 9a4 buf: {"id":null,"method":"mining.notify","params":["00000000666f5292","24a739dd7e88652c7b9c8b21ab1ea88a6a1bc824232e6ffb030387c1518290d7","c31863e1dedd417f1bbca5c7b2d82768e8ba2252c80211d4e054db567e06fb74",true]}
02:21:13:223 9a4 ETH: 10/13/20-02:21:13 - New job from daggerhashimoto.usa.nicehash.com:3353 02:21:13:223 9a4 target: 0x000000019cd15433 (diff: 2663MH), epoch 379(3.96GB) 02:21:13:224 9a4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 02:21:13:224 9a4 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s 02:21:16:607 9a4 buf: {"id":null,"method":"mining.notify","params":["00000000666ff49e","24a739dd7e88652c7b9c8b21ab1ea88a6a1bc824232e6ffb030387c1518290d7","1e1651e46eeb8d1c85523cff24837a6b0683566d6db1d0d5ad80519c4bec74d3",true]}
02:21:16:608 9a4 ETH: 10/13/20-02:21:16 - New job from daggerhashimoto.usa.nicehash.com:3353 02:21:16:608 9a4 target: 0x000000019cd15433 (diff: 2663MH), epoch 379(3.96GB) 02:21:16:609 9a4 ETH - Total Speed: 0.000 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:00 02:21:16:609 9a4 ETH: GPU0 0.000 Mh/s, GPU1 0.000 Mh/s, GPU2 0.000 Mh/s, GPU3 0.000 Mh/s, GPU4 0.000 Mh/s, GPU5 0.000 Mh/s, GPU6 0.000 Mh/s 02:21:17:079 aac Setting DAG epoch #379 for GPU0 02:21:17:080 fd0 Setting DAG epoch #379 for GPU5 02:21:17:081 b84 Setting DAG epoch #379 for GPU3 02:21:17:075 ec4 Setting DAG epoch #379 for GPU2 02:21:17:080 aac Create GPU buffer for GPU0 02:21:17:082 6a0 Setting DAG epoch #379 for GPU4 02:21:17:083 14ac Setting DAG epoch #379 for GPU1 02:21:17:083 388 Setting DAG epoch #379 for GPU6 02:21:17:084 aac GPU0 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 02:21:17:085 fd0 Create GPU buffer for GPU5 02:21:17:086 b84 Create GPU buffer for GPU3 02:21:17:082 ec4 Create GPU buffer for GPU2 02:21:17:087 ec4 GPU2 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 02:21:17:087 aac GPU0 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
02:21:17:088 6a0 Create GPU buffer for GPU4 02:21:17:088 14ac Create GPU buffer for GPU1 02:21:17:089 388 Create GPU buffer for GPU6 02:21:17:089 fd0 GPU5 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 02:21:17:090 6a0 GPU4 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 02:21:17:090 b84 GPU3 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 02:21:17:091 14ac GPU1 - not enough GPU memory to place DAG, you cannot mine this coin with this GPU 02:21:17:091 ec4 GPU2 - OpenCL error -61 - cannot allocate big buffer for DAG. Check readme.txt for possible solutions.
|
|
|
im having problems with claymore, There is something wrong with dag, Cards are 8g but still on epoch change it gets errors sometimes then restarts again.
I never got good hashrates with phoenix on stock bios.
Mr Phoenix please improve miner like adding strap option. Then this miner will be best etc-eth miner on planet. Flashing bios is not good option.
Thanks
|
|
|
what...people have been sharing that information a lot...those gpus are 4 years old... I even made a website to answer basic questions like that many moons ago, I dont update it but you could go check; I suppose most links still work. www.cryptominingtalk.com/flashing-bios/even my SSL is out of date, it really has been a while since the last pump. Good luck with your GPU, but really if you really have trouble people have uploaded a bunch of how to youtube videos on literally everything so go check those out. Thanks for response. im not interested in flashing,it works nice but just wanted keep gpus stock bios and use some mem tweaks and strat phoenix miner. I have problems with claymore miner my rig just crashes if i use any strap. Windows install again headache, thats why just wanted to use simple strap on fly on use phoenix miner,
|
|
|
was looking to this 2 hours and still have no idea how to twaek these rx 480 8g samsung memory. Could be nice manual or put in read me file. People are greedy not sharing their set up.
Many number clk jlkdsjpo jdkldsfkl 12 135 those number doesnt mean nothing to regular user.
how to change what to change ??
|
|
|
not good idea because mb also very expensive for that cpu. instead buy 3900. For that money you can buy 2 3900 and 2 mb. and will be ease to sell you will not loose to much value.
|
|
|
yeah 100mhs looks amazing hashrate for 3080 but i will not hurry because 3070 will be best for mining it has less tdp and im sure hashrates will be nice too. Nvidia is very solid cards i like pascal cards are very solid. Amd is good as long as ETH good. Ones ETH falls amd prices gets very low.
|
|
|
Can anyone help i couldnt find anywhere. making me crazy now.
system is 6 X RX 480 8G sapphire. ram 8g ssd 128g cpu 9100f Z390. virtual memory 64g psu 1200w gold thermaltake
Problem is if i use strap any number 1.2.3.4 windows crashes bluescreen. without strap working no problem. Right now only 1 GPU pluged to x16 slot same thing. strap crashes. damn it if i knew i could keep modded bios with no problems and these strap crap i wouldnt be using. tried new windows installed same thing. driver tried many 20 and 19 versions and blockcain drivers as well same thing. Where is this Claymore is he dead?
Phoenix miner works with no problem but it is giving low hashrate 26Mhz. Claymore with strap 32-33Mhz i was getting. People who says phoenix faster how you get it?
Thanks
|
|
|
Please need help 1st time this happening.
My freind has pc : b450 mb ryzen5 1600 cpu 8gb ram 256gb m.2 sdd rx 480 8g windows 10 64 bit 2004
As soon as i use any strap command pc crashes. freeze on start up of claymore then restart. Without strap working 23-24Mhz
Im out of choises. thanks
|
|
|
Hi dear miners. I know there must be tons of my answer but i need quick one. Recently i switchet to phoenix miner from claymore. I need settings for rx 470 480 570 580 cards under win 10. What driver and settings in miner. Thank you.
|
|
|
|