My 1080 Ti 11GB get more on it and its runnin around with 32 MHs.
Havnt tested lately other Algos with the 1080 TI but looks like its better then the 3060
What are your settings? My 1080Ti wouldn't go above 30-31 mh. You dont need pill so much now. you can use -straps 1 or 2 or 3 look which stable and also -nvmem 2 it is for GDDR5X then is all good add -vmr 5 or 10 or more if dont crash. good luck |
|
|
|
This is going to get worse and worse, you trolls only saw the good side of the pump, now seeing the dump effect. Imagine your profits crash 95% in days? you were making 100 usd per day and now you are making only 5 usd per day eheh and now you realise you were scammed when you bought that 3060ti for 1300 usd(this is the going on price of it right now) hehe
Yeah it used to be 4-5$ per rig  (180mhs) people saw 1 3060 making 8$ they run to store and empty, all scalpers now happy also nvidia also happy sayin woooow we did again. |
|
|
|
|
Is bios updated? Make sure you to switch onboard vga in bios then connect vga cable to mobo. i have 2 same mobo working no issues with 6 gpu each
|
|
|
|
|
@Metroid i agree with
There is lot people doing that again.i can give example: I used to have friend now he is not talking to me anymore why i will tell you. in begin 2019 he asked for help in mining. I found rig with 10x1070 for 2k i said it is good price and he bought it. after 1 month he said it is bullsht and giving very low money.he said i lost 2k was angry at me and blaming, left sold whole rig for same price.
Now 6-7days ago he is calling and saying going to buy 4x rtx 3070 (each 1400$) i said i dont know do whatever you want.then he said he bought it. So there is many people like that.
|
|
|
|
Search there must be softwares to test memory, if it dont pass it will show errors on which memory chip has defected you need to change memory chips. each memory will cost you around 14-20$ then you need solder.
Not just anybody can change memory chip, not everyone can handle soldering iron, it's bad advice telling a newbie to venture into this, better look for qualified personal to do that for you before making things more worse i know not every one can solder, im sure after research he will be sure what to do. do it yourself or give it service. |
|
|
|
It's only worth on the bear market, on the bull market no.
yes i mean buy coins in bear market then sell on bull market after 2-3 years. im sure it will be more than 3-6%. this staking stuff may be only profitable to rich people. |
|
|
|
Yes I completely agree with this. I don't think $58K was the top yet however its not too far off. Basically with all the news that Microstrategy bought coins at $53K and Square at $51K there is still lots of retail FOMO going on. I think the weak point right now is that its taking too long to open an exchange account and transfer fiat to buy crypto. Hence why we are not yet at $100K.
However with all these minimum 6 figure prediction saying it will go to $100K or $250K or $500K or even $1M, makes me realise that most likely we will never hit $100K, because that is where most people will start to sell their crypto since its a nice psychological number.
$79K is important because its about $99K in CAD and AUD. So most will start to take profit there. Your target of $10-$20K is also spot on. Since $20K was the last ATH and it might be support and the 200WMA which always worked as support will be somewhere in that range when we head back down.
Well I do this for a living hehe, so yes reason I'm hardly wrong when comes to this. I got my midterm right, eth 1900 ~ 2100 usd and btc 57 ~ 59k, my bullrun ending term is eth 2500 ~ 2900 usd and btc 74 ~ 79k. There is also a possibility this could end now and then return in 2 to 3 years, will see, I would not buy anything right now, altcoins have been crashing for the last 3 days and already have dropped in price quite a lot, not worth to sell altcoins at these prices, btc still good price to sell, it did not crash that much yet. If btc has to rebound then look at 40k or 35k, if it goes lower than those values then we are going back to 20k and beartraps to 10k or a bit lower 9.6k to fill that cme gap. Looks like it is allready began to drop fast or not yet? |
|
|
|
|
Search there must be softwares to test memory, if it dont pass it will show errors on which memory chip has defected you need to change memory chips. each memory will cost you around 14-20$ then you need solder.
|
|
|
|
|
I think as soon as eth mining over many people will forget about eth. This staking stuff isnt attractive like mining, it is simple like bank account you live your money for %. Well if i have 50k money i will not keep it for % i will buy coins and other things which will give you more than 3-6% profit.
|
|
|
|
Well - i had a chance to test RTX 3060 12GB (Palit Dual) DaggerHashimoto - 24.8 MH/s (Power 141W) So there is really nerf for ETHash algos (tested also with Gminer and NBminer)... sad, but other coins are untouched Just info about other algos: PowerLimit to 100pct to see basic wattage during mining Core: no overclock Memory: +1000 Gminer 2.45Zhash (144,5) - 64.9 Sol/s (Power 166W) (miniZ 66 Sol/s) GrinCuckatoo - 1.24 G/s (Power 169W) CuckooCycle - 7.19 G/s (Power 162W) Cuckatoo32 - 0.47 G/s (Power 169W) KawPow - 23.7 MH/s (Power 167W) BeamV3 - 22.3 Sol/s (Power 169W) (miniZ 23.4 Sol/s) TRex 0.19.11Octopus - 44.91 MH/sHappy Mining to all octopus looks good. |
|
|
|
|
There is no much difference, they all pays nearly same. You only have 100mhs speed so what is difference you earned -/+0.1$ more or less.
|
|
|
|
Thanks, where i can follow you? only here ? will be nice if you have youtube channel for hobby too.
For real time chat then trollbox at poloniex, I'm most active there, I also chat on bitmex or hitbtc not very often though, forums at techpowerup and here at bitcointalk. For complete privacy and protection, better not to mess with youtube, facebook or twitter. Sounds great, will check |
|
|
|
hello guys , I am looking for some help from the pro miners in here
I am currently trying to run a 5 GPU mining rig but I am having problems to get it running all 5 cards
my rig is as follows
2 unit of power supply , 1st 1200w corsair powering the board and 3 cards , and the 2nd 850w cooler master powering the other 2 cards
motherboard asus rog crosshair v formula , the board have 4 pcie x16 slots and 1 pcie x1
cpu amd fx 8150
memory 16gb corsair dominators
ssd H.D.D
5 x vga cards asus strix gtx 1080 ti running on riser cards ver 8 (the newest riser cards)
I have tested all 5 cards separetly and all 5 riser cards separetly and all are working fine
so far I can have the rig running with 3 cards with no problems
the problem starts with adding the other 2 cards , the motherboard recognize all 5 cards but I get the error code 43 on windows
on 2 of the cards , I need to mention that the 2 cards that get the error code 43 are inserted on the pcie x1 slot and pcie x8 slot
after several tries of pluging and unplugging and switching cards places and combination I find out that any cards inserted on that 2 specific slots
are always having there driver crash on windows and that gives the error 43
I have also tested running only one card on these slots and it manages to get the windows up but it immediately crash if I try to put any load
on the vga card
right now I am convinced that the problem is driver related , I am running NVidia latest driver 388.43
I have used the vga ddu uninstaller and completely removed the driver and then reinstalled it but still have the same problem running any cards
on these slots
I have tried every possible settings on the motherboard bios and I have tried flashing the bios again but still no luck
so what I am looking for in here is any help about the NVidia drivers that can get me to run all 5 cards without the error code 43
or any specific settings on the bios if u think that the problem is bios related (my bios doesn't have an option for enable 4g decoding or switching the pcie gen1 gen 2 its running on pcie gen 2 by default)
note : at some point after several tries I have managed to get the system up with 4 cards and started mining with them for few hours but after restarting the system to add the 5th card I can no longer get 4
cards working again
if anyone using this specific motherboard or have any experience with it can you please help
Tell us more about 2 psu connection how are you running them. looks like it is old mobo(whats model?), i have one old mobo too but intel i7 930. it has 5 pcie but i can run only 4gpus. 5 gpu never worked on that later found out that one pcie is parralel to 16x |
|
|
|
I guess prices drop and mining rewards get higher but
How does it work with mining of bitcoin and other alt coins
when prices dropping and people panic selling ??
Hopefully it brings GPU prices down. Graphic cards price aren't coming down as far as mining remains profitable, even if ethereum turn 500$ again graphic cards price will only come down unless mining is not profitable anymore, I'm looking forward to the EIP1559 launch, this will at least solve the high gas fee issue cards prices will go down if profit 30mhs=0.3$ |
|
|
|
as in you'd drop dead if you knew the profits.
where's metroid btw?
I'm here hehe, for the record that phase we have seen from july 2018 to july 2020 will return again very soon, it was 24 months of misery, agony and negative profits and yeah I called that.  Look who is the biggest troll here I do mine for hobby not for profit, trading is for profit not hobby, where most of you trolls sold eth for 100 ~ 400, I myself sold for 1k and most at 2k, better be safe than sorry, I have few gpus at moment, bought last december 2 x 3080 evga ftw3, i have few other gpus, 1x 470, 2x gtx 1070. And I will do just the same thing I did last time, I will wait this bull market to crash 95% again and will again buy coins. I will not buy gpus to mine on the bear market, that is stupid and for the record who follows my advice is doing good, i said last year to buy coins not gpus, after eth hit 900 usd then i said to buy gpus not coins, risk of buying coins is still very high at moment as this can crash anytime, so I advise any to buy gpus if price is right if not then wait this to crash 95% and then buy coins. As for myself I will just wait this bull market to crash, not in a hurry and right now I see thieves wanting to sell 3080 for 2k already hehe, if you can get a 3080 for 1k or less then go for it, if more than that then forget. Thanks, where i can follow you? only here ? will be nice if you have youtube channel for hobby too. |
|
|
|
Man the 470 4gb card I have only pushes 7.5mhs on raven with 1100/850 core and 2000/850 memory. Any OC beyond that maybe gets me 7.6. Is there any bios flashing needed to achieve higher on kawpow?
You dont need mod bios for raven. just run it with teamredminer. maybe 1st start with default settings then try limit power from wattman, mine rx470 4g gets straight away 12.5-13mhs but i do limit power because kawpaw burns alot and makes my gpus hotter then i get 11.5-11.7mhs I have a powercolor 470 4gb with hynix memory. 1100/850 core and 2000/850 memory. I cant get the card above 7.5mhs on raven. Why is this card so subpar and cant achieve 11-13mhs try this: reset your OC in wattman then run teamredminer and look the speed i know it will consume crazy power but wait then try lower power limit to 10-20%, then switch memory to fast timings and give around memory 1900-1950mhz. Raven dont need much memory speed it is not ethereum. as soon as you limit core and memory with undervolting it will suffer thats why play with power limit. it is same thing that you been undervolting on eth. good luck |
|
|
|
huge applause to those that bought GPUS at x2 retail prices and now they are eating a 25% drop in ETH prices, and probably even more, according to TA, which can go as low as 1000$, TOTALLY DESTROYING the previsions on ROI they have made.
YOU DESERVE IT, GREEDY GUYS!!!
Exactly well this been told but people dont listen.i have many friends around asked for mining he spent 2k for rig of 10gtx 1070 which was a bit expensive on that time 2018. because 10 gtx 1070 was giving like 6-9$ a day, he just mined 1 month and sold it for same price now again he comes to me and crying. what can i do if people are stupid. he wants buy now 4x 3070 for 1400$ each. i said i dont know do whatever you want now he is gone not talking to me. |
|
|
|
Batch file won't start. Is there anything I can do?
share your file so people can help setx GPU_FORCE_64BIT_PTR 0 setx GPU_MAX_HEAP_SIZE 100 setx GPU_USE_SYNC_OBJECTS 1 setx GPU_MAX_ALLOC_PERCENT 100 setx GPU_SINGLE_ALLOC_PERCENT 100 PhoenixMiner.exe -pool ssl://eu1.ethermine.org:5555 -pool2 ssl://us1.ethermine.org:5555 -wal xxxxxxxxxxx -proto 3 pause look like there is no worker name? |
|
|
|
just checked for you. Best algo for you is etc. looks like it gives 17.5mhs on eth based algorithms. 17.5mhs on etc right now giving 0.74$. nicehash does not support etc you will need wallet and and pool for etc. with 28 sols on zhash you are making 0.70$. so there is no point to switch.
thanks yeah I will give up mining on my gpu may wait for 3060 then mine with it raven you mean not ti version? if you get that best coin for that octopus |
|
|
|
just checked for you. Best algo for you is etc. looks like it gives 17.5mhs on eth based algorithms. 17.5mhs on etc right now giving 0.74$. nicehash does not support etc you will need wallet and and pool for etc. with 28 sols on zhash you are making 0.70$. so there is no point to switch.
How about conflux? I'm not sure if gtx970 will be good on octopus algorithm, that coin is very profitable and almost near the profits you would get when mining Ethereum, way better than ETC, Zhash and ravencoin what i have seen cards with RT cores makes good on octopus algo. RTX series makes good on octopus |
|
|
|
|
Show Posts
