Am I overlooking something, or is there no way to adjust CGMiner parameters in the webgui ?
Nope with GUI unless you have a special version.
|
|
|
Any Tesla Model S for sale? We love electronic gadgets
|
|
|
root@antMiner2:/etc/config# vim asic-freq
package 'cgminer'
config 'asic-freq' 'default' #option 'freq_value' '0780' #400M #option 'freq_value' '4d81' #350M #option 'chip_freq' '350' option 'timeout' '36' #option 'freq_value' '4c81' #325M #option 'chip_freq' '325' option 'freq_value' '0780' #350M option 'chip_freq' '350' #option 'freq_value' '0580' #300M #option 'chip_freq' '300' #option 'freq_value' '0981' #250M #option 'chip_freq' '250' #option 'freq_value' '4f02' #190M #option 'chip_freq' '190'
option 'timeout' '36' option 'freq_value' '0780' #350M
Please donate if it works for you: 1FrW5ka9CRVWdL9EM4Jut9eHWU1a1biyy5
|
|
|
good job goxed... is this something possible for an average joe like me? Guys heads up on overclocking your AntMiner 202GH/s If you know Linux command line operations it's a piece of cake.
|
|
|
Thanks unit arrived on time.
|
|
|
Thanks unit arrived on time.
|
|
|
Guys heads up on overclocking your AntMiner 202GH/s that you? Im not surprised these can get 10%, from the sounds of it the fan isnt working/needed at full capacity often. (Mine is still with UPS, who basically failed to come today and no note was left yup dat's me . The fan's a very high performance unit. It's basically silenced down so that they are quiet. But for me, I want my 4.75BTC back. I am also using the PSU fan as a pull unit, for slightly. better cooling. This package is supposed to be UPS Intl' priority. Maybe you could call them up and find out what's up. This is not done
|
|
|
Guys heads up on overclocking your AntMiner 202GH/s @ 400MHz / 204GH/s the hw error % is 63,253/(63,253 + 3,543,296 + 41,984)% = ~1.7%, which is rather fine for a system operating at its limits Kudos to Bitmain engineers.
|
|
|
I have a question about how multiple pools are handled.
Are pool 2 and 3 just backup pools in the event the miner can't connect to pool 1?
I think so the default is failover.
|
|
|
I was contacted by Bitmain and should be getting hardware soon all going to plan. I'll keep you posted.
I've received a tracking number I also offered to review their unit and got a tracking number too. Will have it tomorrow evening CET with a bit of luck. Wow that's cool, I wonder what is the criteria for that pic of antminer
|
|
|
This thread is for support related discussions of the BITMAIN Antminer S2 hashing device How to overclock your miner to 400MHz / 205GH/s. My suggestion is to clock them at 375. 400 is a bit too harsh on the voltage regulator. All clock speeds including 375MHz work on both revision of boards.
The miner will draw 500 - 525Watts at the wall (110V mains) after this setting A) ssh into your miner B) edit the following file /etc/config/asic-freqC) change timeout to 36, freq_value to '0780', 'chip_freq' to 400. For miners with build date 2013/11/4root@antMiner2:/etc/config# vim asic-freq
package 'cgminer'
config 'asic-freq' 'default' #option 'freq_value' '0780' #400M
#option 'freq_value' '4e81' #375M #option 'chip_freq' '375' #option 'timeout' '37'
#option 'freq_value' '4d81' #350M #option 'chip_freq' '350' option 'timeout' '36' #option 'freq_value' '4c81' #325M #option 'chip_freq' '325' option 'freq_value' '0780' #350M option 'chip_freq' '400' #option 'freq_value' '0580' #300M #option 'chip_freq' '300' #option 'freq_value' '0981' #250M #option 'chip_freq' '250' #option 'freq_value' '4f02' #190M #option 'chip_freq' '190'
For miners with build date 2013/11/18 package 'cgminer'
config 'asic-freq' 'default' option 'freq_value' '4f81' #400M option 'chip_freq' '400' option 'timeout' '35'
#option 'freq_value' '4e81' #375M #option 'chip_freq' '375' #option 'timeout' '37'
#option 'freq_value' '4d81' #350M #option 'chip_freq' '350' #option 'timeout' '40'
#option 'freq_value' '4c81' #325M #option 'chip_freq' '325' #option 'timeout' '40'
#option 'freq_value' '0b81' #300M #option 'chip_freq' '300' #option 'timeout' '45'
#option 'freq_value' '0981' #250M #option 'chip_freq' '250' #option 'timeout' '55'
#option 'freq_value' '0781' #200M #option 'chip_freq' '200' #option 'timeout' '70'
#option 'freq_value' '4f02' #193M #option 'chip_freq' '193' #option 'timeout' '70'
How to RESET your OpenWRT card in case of an unresponsive minerPlease follow the steps in the instruction manual provided by BITMAIN below. https://github.com/AntMiner/AntGen1/blob/master/manual/AntMiner%20FAQ.pdf?raw=truehttps://github.com/AntMiner/AntGen1/tree/master/manualPlease donate if it works for you: 1FrW5ka9CRVWdL9EM4Jut9eHWU1a1biyy5
|
|
|
Got this in the mail today Thank you for contacting Coinbase Support! Unfortunately, we are experiencing a tremendous volume of support requests, and have not been able to answer your ticket in a reasonable amount of time.
If you are still experiencing difficulties, simply reply to this email with a note that you still need help (you don't need to re-explain the issue you're experiencing), and we will do our best to address it as soon as possible. If your issue has been resolved please do not reply to this email.
We have been experiencing exponential growth and are quickly expanding our support team to match. Thank you for your patience during this time and for your continued support while we grow!
|
|
|
Need to activate the bunker. I think this growth rate is not at all sustainable.
|
|
|
I just got a call from UPS informing me that my package is with Philippines customs and i have to pay 30$ fee.. I'll receive it tomorrow
aah interesting. In the last auction, the package to Japan shipped real fast, while the ones to North America sat in Shenzen for almost one whole day.
|
|
|
guys anybody got their tracking numbers yet? Thanks
|
|
|
|