|
1361
|
Economy / Service Announcements / Re: [ANN] Bitfury ASIC sales in EU and Europe
|
on: September 07, 2013, 07:03:24 PM
|
Dont you think better to change resistor R01F to Variable Resistor and we can player with it.
The resistor is in a regulation feedback path, so we don't want long wires that can influence stability of the control loop. Also, potentiometers are notoriously sensitive to wear and dirt. Why do I measure the resistance of R01F and R02F as 1.3KOhm on the h-board, is it in parallel if other elements on Vout?  |
|
|
|
|
1363
|
Economy / Service Announcements / Re: [ANN] Bitfury ASIC sales in EU and Europe
|
on: September 07, 2013, 07:33:26 AM
|
Use pencil mod on R2F, make it around 1.1 - 1.2K, voltage goes from 0.66V to 0.81V. The default value is ~1.3K. It may blow the 30AFuse if you go too high; so make sure you do it only if you have a soldering station handy  What is "pencil mod" ? Note there's no 30A fuse, and it doesn't blow. There's a resettable polyfuse in the 12A supply. If there's too much current, it will get hot, and as it gets hot the resistance increases, which will reduce current. It is resettable, which means that after removing power and letting it cool down, it will restore itself. There's no need to replace it. Unfortunately, these polyfuses aren't particularly accurate or fast. Don't depend on them to save your board. Their purpose is to protect your power supply from blatant shorts on the H-CARD. Ahh thanks for the heads up. I thought that was a fuse that would blow. The label on it is 300L alpha, so I thought for a moment it was a 30A. Forgot that it was placed in the 12V input. Also the user above explained pencil mod  . |
|
|
|
|
1364
|
Bitcoin / Mining support / Re: **US** BitFury Setup Guide
|
on: September 07, 2013, 06:45:15 AM
|
have a board with only first 4 chips hashing. I think the chips start from bottom left corner and go vertically up (U40, U41, U42, U43) down (U44, U45, U46, U47) ,..., then down the second column and then up, etc. Any tips on how to make the board fully functional. It's okay if chip 5 will not hash.
Okay problem solved. Inferring that the problem chips be disabled as per cscape's suggestion I cut the SPI traces of 4th and 5th chips using a knife and shorted the jumpers using thin copper wire. Here are the results. The board now uses 14chips for hashing. https://i.imgur.com/v3HhER8.jpgI fixed an EOL board by shorting the solder jumpers. no need to cut the traces. Funny, my EOL board with disabled chip is hashing at 25GH/s I tried that, it still didn't solve the issue with my board. That's why I had to cut traces. BTW what was the initial hashrate of your EOL board? |
|
|
|
|
1365
|
Bitcoin / Mining support / Re: **US** BitFury Setup Guide
|
on: September 07, 2013, 06:43:54 AM
|
have a board with only first 4 chips hashing. I think the chips start from bottom left corner and go vertically up (U40, U41, U42, U43) down (U44, U45, U46, U47) ,..., then down the second column and then up, etc. Any tips on how to make the board fully functional. It's okay if chip 5 will not hash.
Okay problem solved. Inferring that the problem chips be disabled as per cscape's suggestion I cut the SPI traces of 4th and 5th chips using a knife and shorted the jumpers using thin copper wire. Here are the results. The board now uses 14chips for hashing. https://i.imgur.com/v3HhER8.jpgI fixed an EOL board by shorting the solder jumpers. no need to cut the traces. Funny, my EOL board with disabled chip is hashing at 25GH/s How were you able to tell which chips were bad? Where's the reference to how to fix the problem? Thanks. Here, it's in the EU thread. https://bitcointalk.org/index.php?topic=250249.860 |
|
|
|
|
1366
|
Bitcoin / Mining support / Re: [GUIDE] BitFury Miner Support/Tuning
|
on: September 07, 2013, 06:22:55 AM
|
Can you explain how to do this?
:-)
Maybee some pictures ...
a) Get an Ohmmeter or DMM b) Get an HB or softer Pencil c) Locate R02F resistor. Donot mod R01F. d) Make sure R02F measures 1.3KOhm e) Rub pencil on the surface of R02F 3 - 4 times f) Measure resistance, if it's 1.2K plug the board in g) Measure output voltage, and repeat steps e,f if necessary for fine-tuning h) Hash like a boss |
|
|
|
|
1367
|
Bitcoin / Mining support / Re: **US** BitFury Setup Guide
|
on: September 07, 2013, 05:34:21 AM
|
Guys heads up on pencil mod for overvolting and thus aiding overclocking.
Use pencil mod on R2F, make it around 1.1 - 1.2K, voltage goes from 0.66V to 0.81V. The default value is ~1.3K. It may blow the 30AFuse if you go too high; so make sure you do it only if you have a soldering station handy After Mod (I have only 3 H cards ) Bank 1
1: 30.781GH/s
2: 33.315GH/s
3: 30.022GH/s
4: 0GH/s
|
|
|
|
|
1368
|
Bitcoin / Mining support / Re: [GUIDE] BitFury Miner Support/Tuning
|
on: September 07, 2013, 05:33:43 AM
|
Guys heads up on pencil mod for overvolting and thus aiding overclocking.
Use pencil mod on R2F, make it around 1.1 - 1.2K, voltage goes from 0.66V to 0.81V. The default value is ~1.3K. It may blow the 30AFuse if you go too high; so make sure you do it only if you have a soldering station handy After Mod (I have only 3 H cards ) Bank 1
1: 30.781GH/s
2: 33.315GH/s
3: 30.022GH/s
4: 0GH/s
|
|
|
|
|
1369
|
Economy / Service Announcements / Re: [ANN] Bitfury ASIC sales in EU and Europe
|
on: September 07, 2013, 05:33:33 AM
|
Guys heads up on pencil mod for overvolting and thus aiding overclocking.
Use pencil mod on R2F, make it around 1.1 - 1.2K, voltage goes from 0.66V to 0.81V. The default value is ~1.3K. It may blow the 30AFuse if you go too high; so make sure you do it only if you have a soldering station handy After Mod (I have only 3 H cards ) Bank 1
1: 30.781GH/s
2: 33.315GH/s
3: 30.022GH/s
4: 0GH/s
|
|
|
|
|
1370
|
Bitcoin / Mining support / Re: **US** BitFury Setup Guide
|
on: September 07, 2013, 05:02:30 AM
|
have a board with only first 4 chips hashing. I think the chips start from bottom left corner and go vertically up (U40, U41, U42, U43) down (U44, U45, U46, U47) ,..., then down the second column and then up, etc. Any tips on how to make the board fully functional. It's okay if chip 5 will not hash.
Okay problem solved. Inferring that the problem chips be disabled as per cscape's suggestion I cut the SPI traces of 4th and 5th chips using a knife and shorted the jumpers using thin copper wire. Here are the results. The board now uses 14chips for hashing.  |
|
|
|
|
1371
|
Economy / Service Announcements / Re: [ANN] Bitfury ASIC sales in EU and Europe
|
on: September 07, 2013, 05:01:36 AM
|
Okay problem solved. Inferring that the problem chips be disabled as per cscape's suggestion I cut the SPI traces of 4th and 5th chips using a knife and shorted the jumpers using thin copper wire. Here are the results. The board now uses 14chips for hashing. https://i.imgur.com/v3HhER8.jpg[/img]]1 AIfDSo 55 1.575 1.638 110 1 0 0 155 [0:0] 220 7 7 7 7 7 7 7 7 6 7 7 7 7 7 6 7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
2 AIfDSo 55 1.603 1.522 112 2 0 0 144 [0:1] 215 8 7 7 7 7 7 6 7 6 7 7 7 7 7 7 8 0 0 0 0 0 0 1 0 1 0 0 0 0 0 0 0
3 AIfDSo 55 1.274 1.501 89 4 0 0 142 [0:2] 257 6 5 6 6 6 6 4 6 6 6 6 5 5 5 5 6 0 1 0 0 0 0 2 0 0 0 0 1 0 0 0 0
4 AIfDSo 55 1.603 1.659 112 3 0 0 157 [0:3] 180 6 7 6 6 7 7 7 7 7 8 8 8 7 7 7 7 1 0 1 1 0 0 0 0 0 0 0 0 0 0 0 0
5 AIfDSo 55 1.804 1.596 126 2 0 0 151 [0:4] 214 8 8 8 8 7 8 8 8 8 8 8 8 8 8 7 8 0 0 0 0 1 0 0 0 0 0 0 0 0 0 1 0
6 AIfDSo 55 1.546 1.575 108 4 0 0 149 [0:5] 209 7 7 6 6 7 7 7 6 7 7 7 7 7 6 7 7 0 0 1 1 0 0 0 1 0 0 0 0 0 1 0 0
7 AIfDSo 55 1.417 1.564 99 1 0 0 148 [0:6] 254 6 6 6 7 7 7 7 6 6 6 6 6 6 6 6 5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
8 AIfDSo 55 1.532 1.659 107 4 0 0 157 [0:7] 214 7 7 7 6 7 7 7 7 7 7 6 6 7 7 6 6 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 1
9 AIfDSo 55 1.904 1.691 133 5 0 0 160 [0:8] 181 8 8 7 9 8 9 9 9 9 9 9 9 8 7 8 7 0 0 1 0 1 0 0 0 0 0 0 0 1 1 0 1
10 AIfDSo 55 1.589 1.564 111 2 0 0 148 [0:9] 237 7 7 7 7 7 7 6 7 7 7 7 7 7 8 6 7 0 0 0 0 0 0 1 0 0 0 0 0 0 0 1 0
11 AIfDSo 55 1.346 1.659 94 1 0 0 157 [0:A] 213 6 6 5 6 6 6 6 6 6 6 6 6 5 6 6 6 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0
12 AiFDso 55 0.043 0.444 3 24 0 0 42 [0:B] 713 0 0 0 1 1 0 0 0 0 0 0 0 1 0 0 0 2 2 2 1 1 2 2 1 1 1 1 1 1 2 2 2
13 AIfDSo 55 1.675 1.564 117 2 0 0 148 [0:C] 210 7 7 7 6 7 7 8 8 8 8 8 8 8 7 7 6 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 1
14 AIfDSo 55 1.016 1.575 71 37 0 0 149 [0:D] 412 4 5 6 2 3 6 4 5 4 7 5 3 3 4 5 5 3 2 1 4 3 0 2 2 3 0 2 4 4 3 2 2
15 AIfDSo 55 1.532 1.480 107 4 0 0 140 [0:E] 216 7 7 7 7 6 6 7 7 6 7 7 7 7 7 5 7 0 0 0 0 1 1 0 0 1 0 0 0 0 0 1 0
16 AIfDSo 55 1.890 1.723 132 3 0 0 163 [0:F] 174 9 8 9 9 9 8 8 8 8 8 8 8 8 7 8 9 0 1 0 0 0 1 0 0 0 0 0 0 0 1 0 0
17 AIfDSo 55 2.062 1.998 144 6 0 0 189 [1:0] 153 8 9 8 8 9 9 8 9 9 9 10 9 10 10 9 10 1 0 1 1 0 0 1 0 0 0 0 1 0 0 1 0
18 AIfDSo 55 1.990 2.029 139 2 0 0 192 [1:1] 148 8 8 8 8 9 9 9 9 9 9 9 9 9 9 8 9 1 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
19 AIfDSo 55 1.747 1.913 122 5 0 0 181 [1:2] 195 8 8 7 8 7 7 7 8 8 8 8 8 8 8 8 6 0 0 1 0 0 1 1 0 0 0 0 0 0 0 0 2
20 AIfDSo 55 1.389 1.807 97 14 0 0 171 [1:3] 215 6 7 7 7 6 7 6 7 6 6 4 3 6 7 6 6 1 0 0 0 1 0 1 0 1 1 3 4 1 0 0 1
21 AIfDSo 55 1.231 1.839 86 41 0 0 174 [1:4] 396 5 5 6 4 5 4 7 4 6 6 6 8 5 5 4 6 3 3 2 4 3 4 1 3 2 2 2 0 3 3 4 2
22 AIfDSo 55 1.847 1.945 129 4 0 0 184 [1:5] 154 8 7 8 8 7 8 7 9 9 9 9 9 8 8 7 8 0 1 0 0 1 0 1 0 0 0 0 0 0 0 1 0
23 AIfDSo 55 1.990 2.008 139 7 0 0 190 [1:6] 156 9 9 8 8 9 10 9 9 9 9 9 8 8 8 8 9 0 0 1 1 1 0 0 0 0 0 0 1 1 1 1 0
24 AIfDSo 55 1.704 1.977 119 1 0 0 187 [1:7] 152 8 8 8 7 8 8 7 7 7 7 7 7 7 7 8 8 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
25 AIfDSo 55 1.875 1.955 131 21 0 0 185 [1:8] 190 7 8 8 8 8 7 8 8 9 9 9 9 9 9 8 7 2 2 2 2 2 3 2 2 1 0 0 0 0 0 1 2
26 AIfDSo 55 1.918 1.955 134 5 0 0 185 [1:9] 168 8 9 9 8 8 9 9 8 8 8 8 8 9 9 8 8 1 0 0 1 1 0 0 0 0 0 0 0 0 0 1 1
27 AIfDSo 55 2.047 1.892 143 7 0 0 179 [1:A] 165 9 9 10 9 8 8 9 9 9 9 8 9 8 9 10 10 1 1 0 0 1 1 0 0 0 0 1 0 1 1 0 0
28 AIfDSo 55 1.818 1.903 127 3 0 0 180 [1:B] 190 8 8 8 8 8 8 8 8 6 8 8 8 8 9 8 8 0 0 0 0 0 0 0 0 2 0 0 0 1 0 0 0
29 AIfDSo 55 2.019 1.924 141 3 0 0 182 [1:C] 183 8 9 9 9 9 9 8 9 9 9 9 9 9 9 9 8 1 0 0 0 0 0 1 0 0 0 0 0 0 0 0 1
30 AIfDSo 55 2.105 1.977 147 5 0 0 187 [1:D] 156 10 9 9 10 10 10 10 10 9 9 8 8 8 9 9 9 0 1 1 0 0 0 0 0 0 0 1 1 1 0 0 0
31 AIfDSo 55 2.147 1.955 150 5 0 0 185 [1:E] 205 10 10 10 8 8 9 7 9 10 10 10 10 10 10 9 10 0 0 0 1 1 0 2 0 0 0 0 0 0 0 1 0
32 AIfDSo 55 2.076 1.998 145 10 0 0 189 [1:F] 160 10 8 8 9 9 8 9 10 8 10 10 10 9 9 9 9 0 1 1 0 0 1 1 0 2 0 0 0 1 1 1 1
33 AIfDSo 55 1.518 1.670 106 1 0 0 158 [2:0] 253 6 7 7 7 7 7 7 7 7 7 7 7 6 5 6 6 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0
34 AIfDSo 55 1.260 1.649 88 2 0 0 156 [2:1] 259 6 6 6 5 5 5 5 5 5 5 6 5 6 6 6 6 0 0 0 0 0 0 0 0 0 1 0 1 0 0 0 0
35 AIfDSo 55 1.518 1.427 106 3 0 0 135 [2:2] 252 7 7 7 6 7 6 7 7 5 6 6 7 7 7 7 7 0 0 0 1 0 1 0 0 1 0 0 0 0 0 0 0
36 AIfDSo 55 1.432 1.575 100 3 0 0 149 [2:3] 219 7 7 6 6 6 6 6 5 6 6 5 6 7 7 7 7 0 0 1 0 0 0 0 1 0 0 1 0 0 0 0 0
37 AIfDSo 55 1.589 1.649 111 5 0 0 156 [2:4] 193 8 8 8 7 7 7 7 7 7 7 7 7 7 6 6 5 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 3
38 AIfDSo 55 1.618 1.638 113 3 0 0 155 [2:5] 214 7 7 7 7 7 7 8 8 8 7 7 6 6 7 7 7 0 0 0 0 0 0 0 0 0 1 0 1 1 0 0 0
39 AIfDSo 55 1.804 1.744 126 0 0 0 165 [2:6] 196 8 8 8 8 8 8 8 8 8 8 8 8 7 7 8 8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
40 AIfDSo 55 1.203 1.533 84 3 1 0 145 [2:7] 242 6 5 6 5 6 6 5 5 5 5 5 5 5 5 5 5 0 1 0 1 0 0 1 0 0 0 0 0 0 0 0 0
41 AIfDSo 55 1.603 1.564 112 5 0 0 148 [2:8] 208 7 8 8 7 7 8 7 7 7 6 7 7 7 7 6 6 0 0 0 1 1 0 0 0 0 1 0 0 0 0 1 1
42 AIfDSo 55 1.374 1.543 96 5 0 0 146 [2:9] 235 7 7 5 6 5 6 6 6 6 6 6 6 5 6 6 7 0 0 2 1 1 0 0 0 0 0 0 0 1 0 0 0
43 AIfDSo 55 1.861 1.564 130 2 0 0 148 [2:A] 209 8 9 9 7 9 8 8 8 8 8 8 8 8 8 8 8 0 0 0 2 0 0 0 0 0 0 0 0 0 0 0 0
44 AIfDSo 55 1.532 1.522 107 5 0 0 144 [2:B] 216 6 7 7 7 7 7 7 7 7 7 7 5 5 7 7 7 1 0 0 0 0 0 0 0 0 0 0 2 2 0 0 0
45 AIfDSo 55 1.689 1.564 118 4 0 0 148 [2:C] 221 8 8 8 7 6 7 6 7 7 8 8 8 8 8 7 7 0 0 0 0 1 0 1 0 0 0 0 0 0 0 1 1
46 AIfDSo 55 1.632 1.638 114 6 0 0 155 [2:D] 231 7 8 8 7 8 7 6 6 7 7 7 7 7 7 7 8 1 0 0 1 0 1 1 1 0 0 0 0 0 0 1 0
speed:2475 noncerate[GH/s]:74.947 (1.629/chip) hashrate[GH/s]:77.771 good:5235 errors:285 spi-err:1 miso-err:0 jobs:376 cores:71% good:45 bad:1 off:0 (best[GH/s]:73.802) Sat Sep 7 04:10:59 2013
0: 825 23.350 24.416 1631 99 0 0 15 1 0 (1.459/chip) 66%
1: 880 29.965 31.075 2093 139 0 0 16 0 0 (1.873/chip) 75%
2: 770 21.632 22.281 1511 47 1 0 14 0 0 (1.545/chip) 70%
|
|
|
|
|
1372
|
Economy / Service Announcements / Re: [ANN] Bitfury ASIC sales in EU and Europe
|
on: September 07, 2013, 01:44:59 AM
|
I have a board with only first 4 chips hashing. I think the chips start from bottom left corner and go vertically up (U40, U41, U42, U43) down (U44, U45, U46, U47) ,..., then down the second column and then up, etc. Any tips on how to make the board fully functional. It's okay if chip 5 will not hash. 1 AIfDSo 55 0.813 1.543 14 26 0 1 36 [0:0] 743 1 1 1 1 1 1 1 1 1 1 1 1 0 0 1 1 0 0 0 0 0 0 0 0 2 4 4 3 2 6 5 0
2 AIfDSo 55 1.045 1.457 18 164 0 0 34 [0:1] 738 1 1 1 1 1 1 1 2 2 2 2 0 0 1 1 1 0 0 0 0 0 0 0 5 11 13 14 26 30 32 33 0
3 AIfDSo 55 1.277 1.457 22 76 0 0 34 [0:2] 738 1 1 1 1 1 1 1 2 2 3 1 1 2 1 2 1 0 0 0 0 0 0 0 6 1 10 8 12 12 14 13 0
4 AIfDSo 55 1.973 1.585 34 187 0 0 37 [0:3] 722 2 2 2 3 3 3 2 2 2 2 2 2 1 2 2 2 0 0 0 4 5 9 13 14 14 15 17 22 24 25 25 0
5 AIfDSo 55 1.625 1.500 28 68 0 0 35 [0:4] 730 2 1 1 1 1 1 2 2 2 2 2 3 2 2 2 2 0 0 0 0 0 0 1 1 2 5 10 11 8 14 16 0
6 AIfDSo 55 1.625 1.500 28 75 0 0 35 [0:5] 736 1 1 1 1 2 2 2 3 2 3 2 1 2 3 1 1 0 0 0 0 0 4 4 2 7 5 3 12 7 11 20 0
7 AIfDSo 55 1.335 1.500 23 58 0 0 35 [0:6] 737 1 1 2 2 2 0 1 2 2 2 1 2 1 2 1 1 0 0 0 1 0 0 6 2 6 2 7 7 12 7 8 0
8 AIfDSo 55 1.799 1.585 31 87 0 0 37 [0:7] 731 2 2 1 0 1 2 2 2 2 2 3 1 3 3 3 2 0 0 0 1 0 6 6 8 3 10 9 13 7 12 12 0
9 AIfDSo 55 1.625 1.628 28 88 0 0 38 [0:8] 735 1 1 1 1 2 2 3 2 2 3 1 2 2 2 2 1 0 0 0 0 0 3 5 4 12 9 13 7 10 12 13 0
10 AIfDSo 55 0.871 1.500 15 55 0 0 35 [0:9] 743 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 1 0 0 0 0 2 8 6 7 11 12 8 0
11 AIfDSo 55 2.031 1.585 35 6 0 0 37 [0:A] 726 2 2 2 2 2 2 1 2 2 3 2 3 3 2 3 2 0 0 0 0 0 0 1 0 0 0 0 1 2 1 1 0
12 AIfDSo 55 0.290 1.585 5 32 0 0 37 [0:B] 751 0 1 0 0 0 1 0 0 0 1 1 0 0 0 0 1 2 1 2 2 2 1 2 2 2 1 1 1 3 4 4 2
13 AIfDSo 55 0.929 1.500 16 61 0 0 35 [0:C] 740 1 0 0 0 1 1 1 1 2 1 2 2 2 0 1 1 0 1 1 1 0 0 0 0 2 4 9 10 10 11 12 0
14 AIfDSo 55 1.045 1.500 18 103 0 0 35 [0:D] 739 2 1 2 2 2 1 0 0 1 0 0 1 1 3 0 2 0 1 0 1 2 3 5 6 11 12 14 14 11 12 11 0
15 AIfDSo 55 0.987 1.414 17 117 0 0 33 [0:E] 742 1 1 1 1 1 1 1 1 1 0 1 0 2 1 3 1 0 0 0 0 0 1 2 4 14 15 12 7 19 26 17 0
16 AIfDSo 55 1.567 1.628 27 34 0 0 38 [0:F] 730 2 2 2 2 2 2 1 0 1 2 1 2 2 2 3 1 0 0 0 0 0 0 0 1 0 1 6 6 4 7 8 1
17 AIfDSo 55 2.089 1.928 36 26 0 0 45 [1:0] 721 2 2 2 2 2 2 2 2 2 3 3 3 1 3 3 2 0 0 0 0 0 0 0 0 1 0 5 5 8 4 3 0
18 AIfDSo 55 1.683 1.928 29 3 0 0 45 [1:1] 728 2 2 2 2 2 2 1 2 2 2 2 2 1 2 2 1 0 0 0 0 0 0 1 0 0 0 0 0 1 0 0 1
19 AIfDSo 55 1.625 1.843 28 10 0 0 43 [1:2] 728 2 2 2 2 2 2 2 1 1 2 2 1 2 1 2 2 0 0 0 0 0 0 0 0 0 0 1 2 1 3 3 0
20 AIfDSo 55 2.089 1.714 36 64 0 0 40 [1:3] 729 2 2 2 2 2 2 1 2 2 3 3 2 3 2 4 2 0 0 0 0 0 0 0 3 1 6 10 6 14 15 9 0
21 AIfDSo 55 0.929 1.757 16 60 0 0 41 [1:4] 740 1 1 1 0 1 1 0 1 1 2 2 0 1 1 1 2 0 0 0 1 0 0 1 0 0 3 5 11 11 14 14 0
22 AIfDSo 55 1.103 1.843 19 103 0 0 43 [1:5] 738 1 1 1 1 1 1 2 2 1 1 2 1 1 0 2 1 0 0 0 0 0 0 6 6 8 9 11 15 11 19 18 0
23 AIfDSo 55 1.161 1.928 20 78 0 0 45 [1:6] 737 1 1 1 1 1 2 2 2 1 1 1 1 1 1 2 1 0 0 0 0 0 0 0 1 3 5 10 10 14 18 17 0
24 AIfDSo 55 1.393 1.885 24 2 0 0 44 [1:7] 732 2 2 2 2 1 1 1 1 1 1 2 1 2 1 2 2 0 0 0 0 0 0 0 0 0 0 0 1 0 1 0 0
25 AIfDSo 55 2.147 1.885 37 50 0 0 44 [1:8] 722 2 2 2 1 2 1 3 3 2 2 4 3 2 3 3 2 0 0 0 1 0 1 4 2 1 2 7 7 7 8 10 0
26 AIfDSo 55 1.683 1.885 29 37 0 0 44 [1:9] 733 1 1 1 1 1 1 2 2 2 2 2 3 4 3 2 1 0 0 0 0 0 0 3 0 5 3 6 1 8 6 4 1
27 AIfDSo 55 2.380 1.843 41 82 0 0 43 [1:A] 724 2 2 2 3 2 3 4 4 3 2 1 3 3 2 3 2 0 0 0 0 4 5 4 5 7 8 8 10 10 11 10 0
28 AIfDSo 55 1.335 1.843 23 12 0 0 43 [1:B] 733 2 2 2 1 1 1 1 1 1 1 1 2 2 1 2 2 0 0 0 0 0 0 0 0 0 0 3 2 3 2 1 1
29 AIfDSo 55 1.625 1.843 28 42 0 0 43 [1:C] 733 1 1 1 1 0 1 1 2 2 2 2 2 3 3 4 2 1 0 0 0 1 0 0 0 2 4 8 9 5 4 8 0
30 AIfDSo 55 2.206 1.928 38 19 0 0 45 [1:D] 720 2 2 1 2 2 2 2 2 2 3 3 3 3 3 3 3 0 0 1 0 0 0 0 0 0 6 1 6 2 2 1 0
31 AIfDSo 55 1.683 1.885 29 182 0 0 44 [1:E] 729 2 2 2 2 1 2 2 1 1 2 2 1 2 2 3 2 0 0 0 0 0 10 10 12 17 20 21 15 26 27 23 1
32 AIfDSo 55 2.670 1.885 46 110 0 0 44 [1:F] 715 2 2 2 3 3 3 3 3 3 3 3 3 4 4 3 2 0 0 0 3 4 4 7 9 9 7 12 14 14 13 14 0
33 AIfDSo 55 1.451 1.628 25 64 0 0 38 [2:0] 734 1 1 1 1 1 1 2 2 2 3 2 2 2 1 2 1 0 0 0 0 0 0 0 1 2 8 6 14 12 13 8 0
34 AIfDSo 55 1.393 1.671 24 84 0 0 39 [2:1] 733 1 1 1 1 1 2 2 2 2 2 2 1 2 2 1 1 0 0 0 0 4 4 7 4 3 1 2 3 15 19 22 0
35 AIfDSo 55 1.161 1.457 20 158 0 0 34 [2:2] 745 1 1 1 0 0 0 1 1 1 2 2 2 2 2 3 1 0 0 0 0 0 5 18 18 7 10 26 19 24 17 14 0
speed:1925 noncerate[GH/s]:52.642 (1.504/chip) hashrate[GH/s]:59.047 good:907 errors:2423 spi-err:0 miso-err:1 jobs:90 cores:3% good:35 bad:0 off:0 (best[GH/s]:0.000) Sat Sep 7 04:51:21 2013
0: 880 20.836 24.467 359 1237 0 1 16 0 0 (1.302/chip) 3%
1: 880 27.801 29.824 479 880 0 0 16 0 0 (1.738/chip) 4%
2: 165 4.005 4.756 69 306 0 0 3 0 0 (1.335/chip) 2%
|
|
|
|
|
1373
|
Bitcoin / Mining support / Re: **US** BitFury Setup Guide
|
on: September 07, 2013, 01:41:28 AM
|
|
have a board with only first 4 chips hashing. I think the chips start from bottom left corner and go vertically up (U40, U41, U42, U43) down (U44, U45, U46, U47) ,..., then down the second column and then up, etc. Any tips on how to make the board fully functional. It's okay if chip 5 will not hash.
|
|
|
|
|
1375
|
Bitcoin / Hardware / Re: [ANN] US/North American Bitfury sales now open ***full prototype pics***
|
on: September 06, 2013, 11:13:55 PM
|
I'm curious as to how many BTC were used to purchase one of these when they went on sale(August shipping). The reason I ask is because I was thinking about buying an October order but when crunching the numbers I will lose 15-20 coins and was trying to figure out how that makes sense.
most of us paid by CC and some buyers paid by wires. What was the dollar amount for an August 400 gh/s unit? 400GH/s was 19K$ Starters were 1.3K$ |
|
|
|
|
Show Posts
