UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 10:29:00 AM |
|
Hi Dok V1.5.8 on startup, it generates the .srb file again This is normal?
It should be generated once for every different gpu, after that on miner start that file should be read, not created again. Hi Doktor, I think this could be better communicated by the program. It *always* says "compiling" although it's just reading the cached / pre-compiled one. If the program finds a pre-compiled srb file, it could say "loading pre-compiled library" or something like that instead of compiling. It happens on 18.5.1 and newer drivers. SRB miner wrong reads cards IDs. Because of it each start it have new ID's of cards and creats new kernel bins. Look at names of .srb files. After name of card it place long string of numbers before end. And each time this numbers are differes. It's exists 1 method to prevent this. But it's not a solution. Disable compute mode on Radeon Settings and than enable it again for each card. But I think that doctor must update miner to support latest AMD drivers without issues.
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 10:40:34 AM |
|
Hi Dok V1.5.8 on startup, it generates the .srb file again This is normal?
It should be generated once for every different gpu, after that on miner start that file should be read, not created again. But generate non stop- every start miner crate new .srb .. in 10 hour i have 40 .srb file and use 100MB for disk space. This is not normal. you must fix this. https://image.prntscr.com/image/zO_QGLM2QZulfBv-qTp5wA.jpgbefore u have 1 file : 687f. without extension and this is it. now you co,mpile every time when start .before you compile only 1 time for 1 algo.
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 10:42:49 AM |
|
Everyone with this problem uses 18.5.1 drivers ?
|
|
|
|
killfrenzy
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 10:47:20 AM |
|
Everyone with this problem uses 18.5.1 drivers ?
I use dag fix beta drivers, and have same issue...
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 10:47:59 AM |
|
Everyone with this problem uses 18.5.1 drivers ?
I use dag fix beta drivers, and have same issue... Only with V1.5.8 ?
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 10:49:45 AM |
|
Everyone with this problem uses 18.5.1 drivers ?
i have Win10-64Bit-Crimson-ReLive-Beta-Blockchain-Workloads-Aug23 driver PS. Misli mda si prije koristio samo prva cetri slova za kompilaciju i on je prepoznao to a sad koristi 10 slova pa stalno radi nanovo compiliranje. 687f. prije 687f********** - 1.5.8 verzija mozda i grijesim ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 11:00:09 AM |
|
Everyone with this problem uses 18.5.1 drivers ?
I use dag fix beta drivers, and have same issue... Only with V1.5.8 ? I have this issue with 18.5.1 and 18.5.2 on 1.5.7 and 1.5.8 versions. Windows 10 1803 x64. And wrong names of cards. 1st 2 RX 580 cards detects as R9 200 series. I have 3rd card r9 270X.
|
|
|
|
killfrenzy
Newbie
Offline
Activity: 16
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 11:22:41 AM |
|
Everyone with this problem uses 18.5.1 drivers ?
I use dag fix beta drivers, and have same issue... Only with V1.5.8 ? 1.5.6 1.5.7 1.5.8 - not tested yet
|
|
|
|
vmozara
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 190
Merit: 59
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 11:28:12 AM |
|
My vega win 10 1803 rigs don´t do this. However, I downloaded 1.5.8. 14 hours ago, run the miner and it was running ever since. I took a look inside 1.5.7 folder but only on one of the rigs I found 2 files. So I guess it is not miner related, more some issue with driver or setup.. Anyway, I am using this miner since 1.5.7 version. 1.5.8. has even better hashrate. Working very stable. I dumped xmr stak that was working fine for me and the hashrate difference is incredible. Doktor83, I assume you are Serbian, right? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Pozdrav iz HR Please, can you try to explain this. XMR stak on supportxmr pool shows exactly the same 24 hour hashrate both the pool and software, yet the CAST and SRB show mush bigger miner hashrate, but supportxmr hashrate reports almost 20% less. (I counted and calculated hashrate) I tried some other pool and hashrate was reported correctly. What could be the cause of this? The miner and the pool both report all good shares Attention Vega owners SRBMINER 1.5.8 + Adrenalin 18.5.2 rig vega64x6 = 12200H/s, rig vega56x6=12000h/s this with power tables from vega mining guide and 1408/800 and 1100/800 awesome!
|
|
|
|
hesido
Jr. Member
Offline
Activity: 158
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 11:29:53 AM |
|
Doktor, a temporary fix would be to allow gpu config to point to SRB files (Only for power users...) so users can tell SRBMiner to use specific file per gpu. (Same if all cards are identical, of course)
|
|
|
|
nordmann666
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 361
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 11:36:46 AM |
|
My vega win 10 1803 rigs don´t do this. However, I downloaded 1.5.8. 14 hours ago, run the miner and it was running ever since. I took a look inside 1.5.7 folder but only on one of the rigs I found 2 files. So I guess it is not miner related, more some issue with driver or setup.. Anyway, I am using this miner since 1.5.7 version. 1.5.8. has even better hashrate. Working very stable. I dumped xmr stak that was working fine for me and the hashrate difference is incredible. Doktor83, I assume you are Serbian, right? ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Pozdrav iz HR Please, can you try to explain this. XMR stak on supportxmr pool shows exactly the same 24 hour hashrate both the pool and software, yet the CAST and SRB show mush bigger miner hashrate, but supportxmr hashrate reports almost 20% less. (I counted and calculated hashrate) I tried some other pool and hashrate was reported correctly. What could be the cause of this? The miner and the pool both report all good shares Attention Vega owners SRBMINER 1.5.8 + Adrenalin 18.5.2 rig vega64x6 = 12200H/s, rig vega56x6=12000h/s this with power tables from vega mining guide and 1408/800 and 1100/800 awesome! 1408 and 1100 with only 800??? which power play tables?!?! everything under 875v and all miners crash instant
|
|
|
|
livada
Newbie
Offline
Activity: 417
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 12:50:33 PM |
|
Attention Vega owners SRBMINER 1.5.8 + Adrenalin 18.5.2 rig vega64x6 = 12200H/s, rig vega56x6=12000h/s this with power tables from vega mining guide and 1408/800 and 1100/800 awesome!
2000 hr in v7 with 800mv? pls SS ofr miner and overdirive setup your vega 56 use 64 bios? vhat vega u have? samsung-hynix memory? soft powertable? 12000hr in v7 and use ?? power from wall?
|
|
|
|
RuMiner
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 168
Merit: 15
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 01:25:55 PM |
|
XMR stak on supportxmr pool shows exactly the same 24 hour hashrate both the pool and software, yet the CAST and SRB show mush bigger miner hashrate, but supportxmr hashrate reports almost 20% less. (I counted and calculated hashrate) I'm digging XMR on Nanopool and usually it shows higher average hashrate than miner gives. For example, right now pool's average for 6 hours is 7910 while miner shows stable 7750 (4xVega56).
|
|
|
|
lebuawu2
Jr. Member
Offline
Activity: 176
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 01:28:06 PM |
|
Hi Dok,
Is it possible to add feature when miner get diff from pool more than 1,000,000 or any other diff that we specify it will reconnect to pool again? Because nicehash will always increase diff until miner take time to solve that. After that because miner take time to submit share nicehash server will disconnected. So instead after sometimes miner reconnect I think better after miner get diff above diff we specify in miner it will auto reconnect.
Thanks.
can you please added this feature in the next release? really need it for nicehash and fairpool also because sometimes pool send job that have diff more than miner can handle.
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 04:37:13 PM |
|
But I think that doctor must update miner to support latest AMD drivers without issues.
Serious miners don't always update their drivers when a new one comes out, they use ones that are proven to be good and stable. A driver that isn't capable of recognising its own GPU is a trash, and shouldn't be used at all. Altough no one else except you reported this issue, so i guess it's something on your side. I really can't check out every new driver and re-work miner every time when a new driver comes out. You should stick to a driver that is working stable and good for you.
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 04:39:34 PM |
|
My vega win 10 1803 rigs don´t do this. However, I downloaded 1.5.8. 14 hours ago, run the miner and it was running ever since. I took a look inside 1.5.7 folder but only on one of the rigs I found 2 files. So I guess it is not miner related, more some issue with driver or setup..
On my win10 rigs , NOT updated to 1803, and the good old blockchain driver, i can't reproduce the new cache file on every run bug.. But i will ofc look into it.
|
|
|
|
UnclWish
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 04:42:51 PM |
|
I notice on 1.5.8 often appears duplicate shares on nicehash heavy algo. If it's some way to reduce amount of duplicate shares or fix that?
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 04:44:36 PM |
|
before u have 1 file : 687f. without extension and this is it. now you co,mpile every time when start .before you compile only 1 time for 1 algo.
That's because on earlier versions there was a bug preventing creation of cached files for VEGA gpu's, so they were compiled every time, but 1 empty file was created ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) Those numbers all have a meaning, like worksize, num of CU's etc etc, thats how the miner knows which kernel to use. Im just curious does it really every time , even if you did not change ANYTHING in config file like algo, or anything in gpu_conf, create a new file ?
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 04:45:36 PM |
|
Hi Dok,
Is it possible to add feature when miner get diff from pool more than 1,000,000 or any other diff that we specify it will reconnect to pool again? Because nicehash will always increase diff until miner take time to solve that. After that because miner take time to submit share nicehash server will disconnected. So instead after sometimes miner reconnect I think better after miner get diff above diff we specify in miner it will auto reconnect.
Thanks.
can you please added this feature in the next release? really need it for nicehash and fairpool also because sometimes pool send job that have diff more than miner can handle. you are probably the only person on this earth who needs this, but ok i will add it ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 04:51:57 PM |
|
I notice on 1.5.8 often appears duplicate shares on nicehash heavy algo. If it's some way to reduce amount of duplicate shares or fix that?
Are you sure those are duplicate shares? There is a mechanism that does not allow sending of the same result twice. Also for nicehash there is a protection for stale shares, cause nicehash does not like them.
|
|
|
|
|