RuMiner
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 168
Merit: 15
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 11:30:12 AM |
|
Suggestion for future if it does not require hard work... ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) What do you think about the idea to move all files dll and exe to separated dir or make one just for .srb files, just live start, pools and config out. Will be less mess in dir... Maybe dir just for .srb files would be enough. you can move away pools, config and logs using command line params like I did: %~dp0SRBMiner-CN.exe --config conf\config.txt --pools conf\pools.txt --logfile logs\%date%-%random%.log it became more easy to update miner version
|
|
|
|
ALEX_RAA
Newbie
Offline
Activity: 78
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 11:59:03 AM |
|
From the logs i can see that this isn't probably related to devfee-user pool switching, because after the devfee finished, you got jobs and accepted results from your pool, so the switchback was successful.
[2018-06-03 03:09:20] switch_pool: Disconnected from devfee pool, now mining for user [2018-06-03 03:10:26] hashrate: GPU0: 964 H/S [BUS:5] [2018-06-03 03:10:26] hashrate: GPU1: 1013 H/S [BUS:6] [2018-06-03 03:10:26] hashrate: GPU2: 1017 H/S [BUS:2] [2018-06-03 03:10:26] hashrate: GPU3: 964 H/S [BUS:4] [2018-06-03 03:10:26] hashrate: GPU4: 952 H/S [BUS:1] [2018-06-03 03:10:26] hashrate: Total: 4910 H/S [2018-06-03 03:10:59] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"010193e4ccd805375fd1190a992e2b57929b47ae079a998a31bc7e1c11111a5a43e932b87519c20 0000000e510944a66dda1a13a8c31101b4cd678c25c109320e76a7936b82ff0fc10938201","job_id":"436392239714041","target":"d96f0000"}} [2018-06-03 03:10:59] pool_have_job: Pool sent a new job (ID: 436392239714041) [2018-06-03 03:11:09] miner_result: Sending user result to pool [2018-06-03 03:11:09] json_send: {"method":"submit","params":{"id":"316536043444648","job_id":"436392239714041","nonce":"964033b3","result":"23e46068b4c15131a3d638b862f4988b4f810f82aa7b46a2d4cf0a91360b0000"},"id":1} [2018-06-03 03:11:09] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}} [2018-06-03 03:11:09] miner_result: Pool accepted result 0x00000B36
also there are new jobs/accepted shares after this before the fun begins :
[2018-06-03 03:31:29] json_receive: {"id":1,"jsonrpc":"2.0","error":{"code":-1,"message":"Unauthenticated"}} [2018-06-03 03:31:29] miner_result: You are not authenticated to the pool [2018-06-03 03:31:29] miner_result: Pool rejected result 0x00003690 (unauthenticated) [2018-06-03 03:31:29] miner_result: Network error [2018-06-03 03:31:29] miner_result: Network error
The 0 hashing speed in this case is normal, because the GPU's are not working on any job. This looks like some kind of pool problem to me.
it's happens on different pools and different algos
|
|
|
|
kusuma
Newbie
Offline
Activity: 7
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 12:00:27 PM |
|
V1.5.8 - Fixed a bug in pool switching process - Fixed a bug in watchdog's "reboot_script" - Changed default devfee pool for Heavy algo
+ I would like to politely ask everyone if they appreciate my work, to switch their miners to this new version.
The default devfee pool for heavy algo was pool.sumokoin.com, which is under the control of the origin Sumo team. They self-decided, without any community voting or anything to switch their algo back to now ASIC friendly Cryptonight from block 137500. That will happen in about two days. What this means to users of SRBMiner/Me ? On previous versions if you mine any coin on 'heavy' algo from monday, the devfee will connect to pool.sumokoin.com using 'heavy' algo, but the pool will be using classic CN, so shares will be ALL rejected, and i won't be getting the 0.85% fee.
Thank you in advance, if you are going to support me and going to switch to this version.
Switching now. Can i just replace the .exe file in the miner directory? thank you, yes its enough if you were using one of the newer versions > 1.4.0 Switched all 200kh+ of my miners to 1.5.8, Thank you... keep up the great works
|
|
|
|
JuanHungLo
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 01:19:05 PM |
|
I updated all my miners to v1.5.8 and also added a line to my start.bat: del *.srb - that's for all you complaining about the .srb files accumulating in your folder ![Wink](https://bitcointalk.org/Smileys/default/wink.gif)
|
Bull markets are born on pessimism, grow on skepticism, mature on optimism, and die on euphoria. - John Templeton
|
|
|
duyquang06
Newbie
Offline
Activity: 154
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 01:25:19 PM |
|
1.5.8 for all my rigs too ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) just personal ask you why sumo coin, why not xmr for dev fee, as my little knowledge, xmr profit usually better sumo. Just ask if u don't mind : D
|
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 02:21:15 PM |
|
1.5.8 for all my rigs too ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif) just personal ask you why sumo coin, why not xmr for dev fee, as my little knowledge, xmr profit usually better sumo. Just ask if u don't mind : D Thanks everyone for supporting me ! Every algo in the miner has its own devfee address, so for normalv7 its XMR, but from my calculations roughly 70% usage of SRBMiner is for heavy algo, probably because of Haven and Loki being the most profitable. In the time i added heavy algo, the only coin was sumo, so that's why the devfee was on sumo. Really thank you guys again!
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 02:22:21 PM |
|
I have this problem on 1.5.6: all gpus have "busid 0" I didn't have this problem on 1.4.9 ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimage.ibb.co%2FeGuwVy%2F156_1.png&t=665&c=H6RwGcaPSLn50Q) ![](https://ip.bitcointalk.org/?u=https%3A%2F%2Fimage.ibb.co%2FjAtqqy%2F156_2.png&t=665&c=7Zh0Dy75z61NHw) This is a driver issue, not miner. Try newer drivers.
|
|
|
|
lebuawu2
Jr. Member
Offline
Activity: 176
Merit: 2
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 04:21:46 PM |
|
Hi Dok,
Is it possible to add feature when miner get diff from pool more than 1,000,000 or any other diff that we specify it will reconnect to pool again? Because nicehash will always increase diff until miner take time to solve that. After that because miner take time to submit share nicehash server will disconnected. So instead after sometimes miner reconnect I think better after miner get diff above diff we specify in miner it will auto reconnect.
Thanks.
|
|
|
|
knittycatkitty
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 08:14:36 PM |
|
i got this error . " HW error: BUS_ID_1: 1" but share still accepted. what dose it mean? and what should i do? thank you. [2018-05-19 17:24:53] stats: Accepted/Total shares: 2/2
[2018-05-19 17:24:53] stats: Average time to find share: 50 seconds [2018-05-19 17:24:53] stats: HW error: BUS_ID_1: 1 HW error means result from GPU on BUS ID 1 couldn't be validated, so it's discarded. It was not accepted. You should lower intensity or there is too much overclocking, that causes bad results. Bus id's are used now for GPU identification cause they are unique, so if it says BUS ID 1, then it's BUS ID 1 in overdriventool, gpuz etc etc. It's easier to identify which card causes problems. is there any way to identify GPUs by busID on overdriveNTool? I am trying to troubleshoot some cards but the only way i am able to do it at the moment is by changing clock speeds to find out which busID/GPU corresponds to which GPU in the miner (they don't match) Very time consuming process indeed but I believe the bus ID move is a good step
|
|
|
|
wgestickley
Newbie
Offline
Activity: 76
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 08:19:52 PM |
|
i got this error . " HW error: BUS_ID_1: 1" but share still accepted. what dose it mean? and what should i do? thank you. [2018-05-19 17:24:53] stats: Accepted/Total shares: 2/2
[2018-05-19 17:24:53] stats: Average time to find share: 50 seconds [2018-05-19 17:24:53] stats: HW error: BUS_ID_1: 1 HW error means result from GPU on BUS ID 1 couldn't be validated, so it's discarded. It was not accepted. You should lower intensity or there is too much overclocking, that causes bad results. Bus id's are used now for GPU identification cause they are unique, so if it says BUS ID 1, then it's BUS ID 1 in overdriventool, gpuz etc etc. It's easier to identify which card causes problems. is there any way to identify GPUs by busID on overdriveNTool? I am trying to troubleshoot some cards but the only way i am able to do it at the moment is by changing clock speeds to find out which busID/GPU corresponds to which GPU in the miner (they don't match) Very time consuming process indeed but I believe the bus ID move is a good step U can enable “show bus I’ds” in the ODT settings :-)
|
|
|
|
bluspirit
Jr. Member
Offline
Activity: 70
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 08:53:03 PM |
|
all rigs -> v1.5.8Thanks again doktor ![Smiley](https://bitcointalk.org/Smileys/default/smiley.gif)
|
|
|
|
knittycatkitty
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 10:26:37 PM |
|
i got this error . " HW error: BUS_ID_1: 1" but share still accepted. what dose it mean? and what should i do? thank you. [2018-05-19 17:24:53] stats: Accepted/Total shares: 2/2
[2018-05-19 17:24:53] stats: Average time to find share: 50 seconds [2018-05-19 17:24:53] stats: HW error: BUS_ID_1: 1 HW error means result from GPU on BUS ID 1 couldn't be validated, so it's discarded. It was not accepted. You should lower intensity or there is too much overclocking, that causes bad results. Bus id's are used now for GPU identification cause they are unique, so if it says BUS ID 1, then it's BUS ID 1 in overdriventool, gpuz etc etc. It's easier to identify which card causes problems. is there any way to identify GPUs by busID on overdriveNTool? I am trying to troubleshoot some cards but the only way i am able to do it at the moment is by changing clock speeds to find out which busID/GPU corresponds to which GPU in the miner (they don't match) Very time consuming process indeed but I believe the bus ID move is a good step U can enable “show bus I’ds” in the ODT settings :-) i dont have that setting for some reason on my rigs, am using OverdriveNTools
|
|
|
|
bluspirit
Jr. Member
Offline
Activity: 70
Merit: 3
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 03, 2018, 10:54:09 PM |
|
U can enable “show bus I’ds” in the ODT settings :-)
i dont have that setting for some reason on my rigs, am using OverdriveNTools Open OverDrivenTool > right click on title bar > settings > enable: show.. bus number > restart OverDrivenTool
|
|
|
|
knittycatkitty
Newbie
Offline
Activity: 19
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 12:10:58 AM |
|
U can enable “show bus I’ds” in the ODT settings :-)
i dont have that setting for some reason on my rigs, am using OverdriveNTools Open OverDrivenTool > right click on title bar > settings > enable: show.. bus number > restart OverDrivenTool ah works perfect, thank you. tried searching on google how to do this and could not come up with anything, just shows how awesome this community is
|
|
|
|
AnjiB
Newbie
Offline
Activity: 2
Merit: 0
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 04:44:20 AM |
|
Hi Dok V1.5.8 on startup, it generates the .srb file again This is normal?
|
|
|
|
doktor83 (OP)
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 06:37:35 AM |
|
Hi Dok V1.5.8 on startup, it generates the .srb file again This is normal?
It should be generated once for every different gpu, after that on miner start that file should be read, not created again.
|
|
|
|
nordmann666
Member
![*](https://bitcointalk.org/Themes/custom1/images/star.gif)
Offline
Activity: 361
Merit: 16
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 06:58:27 AM |
|
the srb file contains what?
is it better to generate new one if i change voltage/frequences?
and i set my card to 1408MHz (can see in HWInfo on idle) but after starting SRBMiner it shows 1387MHz - shutdown miner = 1408MHz?!
|
|
|
|
hesido
Jr. Member
Offline
Activity: 158
Merit: 5
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 07:02:57 AM |
|
Hi Dok V1.5.8 on startup, it generates the .srb file again This is normal?
It should be generated once for every different gpu, after that on miner start that file should be read, not created again. Hi Doktor, I think this could be better communicated by the program. It *always* says "compiling" although it's just reading the cached / pre-compiled one. If the program finds a pre-compiled srb file, it could say "loading pre-compiled library" or something like that instead of compiling.
|
|
|
|
abg00
Jr. Member
Offline
Activity: 288
Merit: 1
|
![](https://bitcointalk.org/Themes/custom1/images/post/xx.gif) |
June 04, 2018, 09:15:53 AM |
|
Hi Dok V1.5.8 on startup, it generates the .srb file again This is normal?
It should be generated once for every different gpu, after that on miner start that file should be read, not created again. on rx 560 card generate each start
|
|
|
|
|