[0Th]Ozcoin Pooled Mining |DGM 1%|Stratum+VarDiff port 80|NEW CN mining|

[keystroke]

What's up with the reporting of blocks on 'Previous Rounds'?

Block           Date                             Shares Total    Shares       Payout           Donation           Share Val.        Conf.
227652   2013-03-23 19:57:21     4,458,685   1,476   0.00689714   0.00014076   0.00000476   19
227652   2013-03-23 19:58:46     67,202           1,476   0.00689714   0.00014076   0.00000476   18
227652   2013-03-23 19:57:21     4,458,685   52           0.00568724   0.00011607   0.00010950   19
227652   2013-03-23 19:58:46     67,202           52           0.00568724   0.00011607   0.00010950   18

2 blocks were found very close together and the db glitched

Is v1 shut down yet?

[1713962124]

1713962124

[1713962124]

1713962124

[1713962124]

1713962124

[Graet]

What's up with the reporting of blocks on 'Previous Rounds'?

Block           Date                             Shares Total    Shares       Payout           Donation           Share Val.        Conf.
227652   2013-03-23 19:57:21     4,458,685   1,476   0.00689714   0.00014076   0.00000476   19
227652   2013-03-23 19:58:46     67,202           1,476   0.00689714   0.00014076   0.00000476   18
227652   2013-03-23 19:57:21     4,458,685   52           0.00568724   0.00011607   0.00010950   19
227652   2013-03-23 19:58:46     67,202           52           0.00568724   0.00011607   0.00010950   18

2 blocks were found very close together and the db glitched

Is v1 shut down yet?

no
but is not related to that issue

[Graet]

eu.ozco.in and us.ozco.in getwork servers have been updated to stratum proxy and will now make version2 blocks

Merged mining for Namecoin has ceased on Ozcoin

[pehoko]

After this update all my workers were offline, this was my last work on your pool, bye.

[arklan]

After this update all my workers were offline, this was my last work on your pool, bye.

mine too, actually - then i changed the ports on us.ozco.in to 3333 and all worked again.

[thph]

hi
so with my Ztex BTCMiner non of the ports is working - temp. Problem ?
which one can i use
thanks for your reply

[Blaksmith]

After this update all my workers were offline, this was my last work on your pool, bye.

Hate to see you leave OzCoin, but that is your option
Our first update on eu.ozco.in took a little longer to implement, and could have accidentally knocked your workers offline by accident, if your miners don't have fail-over, or any kind of protection like that.  Only port 8332 is available for getwork mining.  If you have a stratum capable miner, 8332 will use stratum instead of getwork too!  Port 8331 is no longer available, since merged mining is no longer available also.  Port 3333 is also available if you know that your miner is stratum compatable.

Cheers,
Blak

[Blaksmith]

hi
so with my Ztex BTCMiner non of the ports is working - temp. Problem ?
which one can i use
thanks for your reply

You should be able to use the following:
http://us.ozco.in:8332
http://eu.ozco.in:8332

If you were using 8331 to do only btc mining without the merged mining, you will need to change to 8332

If you are still having problems, please join us on the IRC channel #ozcoin on the Freenode IRC network, and we will try to help see what is going on

Cheers,
Blak

[alphadude]

Miners will not connect. I'm running cgminer 2.11.3. What do I need to change in this config file to be able to mine on stratum server?
{
"pools" : [
   {
      "url" : "stratum+tcp://eustratum.ozco.in:3333/",
      "user" : "user",
      "pass" : "pass"
   },
   {
      "url" : "http://eu.ozco.in:8332/",
      "user" : "user",
      "pass" : "pass"
   },
   {
      "url" : "http://pit.deepbit.net:8332/",
      "user" : "user",
      "pass" : "pass"
   }
]
,
"intensity" : "9,9",
"vectors" : "1,1",
"worksize" : "64,64",
"kernel" : "poclbm,poclbm",
"auto-fan" : true,
"auto-gpu" : true,
"gpu-engine" : "0,0",
"gpu-fan" : "0-100,0-100",
"gpu-memclock" : "0,0",
"gpu-memdiff" : "0,0",
"gpu-powertune" : "0,0",
"gpu-vddc" : "0.000,0.000",
"temp-cutoff" : "95,95",
"temp-overheat" : "85,85",
"temp-target" : "75,75",
"api-port" : "4028",
"expiry" : "120",
"gpu-dyninterval" : "7",
"gpu-platform" : "0",
"gpu-threads" : "2",
"log" : "5",
"queue" : "1",
"retry-pause" : "5",
"scan-time" : "60",
"temp-hysteresis" : "3",
"shares" : "0",
"kernel-path" : "/usr/local/bin"
}

[os2sam]

Miners will not connect. I'm running cgminer 2.11.3. What do I need to change in this config file to be able to mine on stratum server?

      "url" : "stratum+tcp://eustratum.ozco.in:3333/",
      

I had noticed yesterday that the eustratum.ozco.in:3333 was dead,  this server is towards the bottom of my failover list so I haven't worried about it.  Try stratum.ozco.in:3333.

I think all of the server's got reordered over the weekend.
Sam

[alphadude]

Miners will not connect. I'm running cgminer 2.11.3. What do I need to change in this config file to be able to mine on stratum server?

      "url" : "stratum+tcp://eustratum.ozco.in:3333/",
      

I had noticed yesterday that the eustratum.ozco.in:3333 was dead,  this server is towards the bottom of my failover list so I haven't worried about it.  Try stratum.ozco.in:3333.

I think all of the server's got reordered over the weekend.
Sam

Thanks mate. I'm getting closer. Now I'm getting stratum auth failed: (null)
Should'nt credentials be the same as before?

[os2sam]

Miners will not connect. I'm running cgminer 2.11.3. What do I need to change in this config file to be able to mine on stratum server?

      "url" : "stratum+tcp://eustratum.ozco.in:3333/",
      

I had noticed yesterday that the eustratum.ozco.in:3333 was dead,  this server is towards the bottom of my failover list so I haven't worried about it.  Try stratum.ozco.in:3333.

I think all of the server's got reordered over the weekend.
Sam

Thanks mate. I'm getting closer. Now I'm getting stratum auth failed: (null)
Should'nt credentials be the same as before?

Yes they should be the same.  Double check your worker settings.

[alphadude]

Miners will not connect. I'm running cgminer 2.11.3. What do I need to change in this config file to be able to mine on stratum server?

      "url" : "stratum+tcp://eustratum.ozco.in:3333/",
      

I had noticed yesterday that the eustratum.ozco.in:3333 was dead,  this server is towards the bottom of my failover list so I haven't worried about it.  Try stratum.ozco.in:3333.

I think all of the server's got reordered over the weekend.
Sam

Thanks mate. I'm getting closer. Now I'm getting stratum auth failed: (null)
Should'nt credentials be the same as before?

Yes they should be the same.  Double check your worker settings.

I have and they are exactly the same as I had on eu.ozco.in. I've also tried au.ozco.in but that does not work either...
Am I the only one with this problem?

[mendoza]

Miners will not connect. I'm running cgminer 2.11.3. What do I need to change in this config file to be able to mine on stratum server?

      "url" : "stratum+tcp://eustratum.ozco.in:3333/",
      

I had noticed yesterday that the eustratum.ozco.in:3333 was dead,  this server is towards the bottom of my failover list so I haven't worried about it.  Try stratum.ozco.in:3333.

I think all of the server's got reordered over the weekend.
Sam

Thanks mate. I'm getting closer. Now I'm getting stratum auth failed: (null)
Should'nt credentials be the same as before?

Yes they should be the same.  Double check your worker settings.

I have and they are exactly the same as I had on eu.ozco.in. I've also tried au.ozco.in but that does not work either...
Am I the only one with this problem?

Same problem here, getting auth failed: (null) both stratum:3333,eu and us server on port 8332
worker settings ok (i've just changed the url params for us and eu server)

[beekeeper]

Web server is down, stratum still workinh (it seems)..

[ChipGeek]

I would like to continue to mine my measly 0.9GH/s on Ozcoin but I cannot get the configuration right after the changes made roughly 9 hours ago.  

Using cgminer 2.11.3 on http://us.ozco.in:8332    (I was on port 80.)

Since my hashrate was so small I was not using stratum and I was under the impression I would not be forced to do so.  Perhaps that is my problem.  Do I have to use stratum on Ozcoin now?

Edit:  Do I need to use "stratum+tcp://" instead of "http://" ?

[kslavik]

I have some Namecoins left. Why are they not transferred out to Namecoin Wallet Address on file? I understand that merged mining is no longer but at least allow users to transfer the namecoins out.

[miter_myles]

Looks like something just crapped out?

[ewibit]

Pool: [ 0 MHash/s | 0 Users | 0 Workers ]
Bitcoin Round: [ 9,172,410 Shares | 0d 4h 8m | 31.59% Efficiency ]

[miter_myles]

just logged into my rigs - still hashing away... I guess it may be a web server issue?

1346EST - looks like site is back up and reporting