Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[BenCodie]

whats the eth mining speed for 8.0? any improvement so far?

Same speed of 7.4 is no difference
only pascal

[Raja_MBZ]

Does it worth to do dual with PASC? Did somebody try to check hash rates on modded RX 480 8Gb?

I'm going to try it out right away with my RX 480 8 GB rigs, will update you here with the hashrates of both, PASC and ETH.

New version seems great, keep up the good work Claymore!

[Alisito]

Got it working, getting accepted shares on DCR but its all rejected for ETH.

edit: Had a card sick and didnt notice. A clean restart and its all going smooth.

edit2: Lots of driver crashes, Im using win7 x64 with 15.12 drivers. Could it be that I have a mix of GPUs? 3 R9 280X & 1 R9 390

I have a rig 4 380x + 2 390 - works ok. So check overclocking, power, all items in "troubleshooting" section of readme.

hey claymore what about the msi rx480 gaming 8gb on dual, work fine? any recomends or issues?

thanks keep the good work

[BenCodie]

Does it worth to do dual with PASC? Did somebody try to check hash rates on modded RX 480 8Gb?

I'm going to try it out right away with my RX 480 8 GB rigs, will update you here with the hashrates of both, PASC and ETH.

New version seems great, keep up the good work Claymore!

We already tried lol
you are late to the party so no need of your update dear 

[batut]

hi all.
I have a problem with the dual miner. etherium in mod 1 is working fine. if I run dual miner, I get an error open CL.
 please help.

virtaul memory 16Gb?

yes.
p.s. I have this problem on different GPU

Batch file config?

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://pascal.eu.nicehash.com:3358 -dwal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -mode 0 -dcoin pasc
or
#EthDcrMiner64.exe -etha 1 -epool eth-eu1.nanopool.org:9999 -ewal 0x11f6567eacf4acd044995cb3076b8bb513204cf0 -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.b73764e3de6b9758.voron/312@gmail.com -dpsw x -dcoin pasc -dcri 15 -allpools 1 -allcoins 1

I tried a lot of options

[BenCodie]

hi all.
I have a problem with the dual miner. etherium in mod 1 is working fine. if I run dual miner, I get an error open CL.
 please help.

virtaul memory 16Gb?

yes.
p.s. I have this problem on different GPU

Batch file config?

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://pascal.eu.nicehash.com:3358 -dwal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -mode 0 -dcoin pasc
or
#EthDcrMiner64.exe -etha 1 -epool eth-eu1.nanopool.org:9999 -ewal 0x11f6567eacf4acd044995cb3076b8bb513204cf0 -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.b73764e3de6b9758.voron/312@gmail.com -dpsw x -dcoin pasc -dcri 15 -allpools 1 -allcoins 1

I tried a lot of options

try this one in quote

EthDcrMiner64.exe -epool eu1.ethpool.org:3333 -ewal 0x11f6567eacf4acd044995cb3076b8bb513204cf0 -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.b73764e3de6b9758.voron/312@gmail.com -dpsw x -dcoin pasc

What drivers version you are using?
Ram?
CPU?
Double check of that GPU's riser aswell

[batut]

hi all.
I have a problem with the dual miner. etherium in mod 1 is working fine. if I run dual miner, I get an error open CL.
 please help.

virtaul memory 16Gb?

yes.
p.s. I have this problem on different GPU

Batch file config?

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://pascal.eu.nicehash.com:3358 -dwal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -mode 0 -dcoin pasc
or
#EthDcrMiner64.exe -etha 1 -epool eth-eu1.nanopool.org:9999 -ewal 0x11f6567eacf4acd044995cb3076b8bb513204cf0 -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.b73764e3de6b9758.voron/312@gmail.com -dpsw x -dcoin pasc -dcri 15 -allpools 1 -allcoins 1

I tried a lot of options

try this one in quote

EthDcrMiner64.exe -epool eu1.ethpool.org:3333 -ewal 0x11f6567eacf4acd044995cb3076b8bb513204cf0 -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.b73764e3de6b9758.voron/312@gmail.com -dpsw x -dcoin pasc

What drivers version you are using?
Ram?
CPU?
Double check of that GPU's riser aswell

thank you my friend. everything turned out
1. 15.12
2. 8GB
3. celeron G1840
http://s018.radikal.ru/i516/1702/ff/4dedcfb389b7.jpg

[batut]

again started the miner again and error
http://s019.radikal.ru/i614/1702/44/91ba22e994b8.jpg

[shadowhlohavec]

again started the miner again and error

reinstall drivers

[bensam1231]

So why is Nvidia out in the cold again? I assume it's not technical prowess as you seem to be on top of your game Claymore.

Considering Nvidia already works with the original dual miner and with SGminer...

[uninexus]

again started the miner again and error
http://s019.radikal.ru/i614/1702/44/91ba22e994b8.jpg

Unable to create DAG file is usually related to your virtual memory set too low or inproperly in Windows. Set to 16 GB minimum

[batut]

again started the miner again and error
http://s019.radikal.ru/i614/1702/44/91ba22e994b8.jpg

Unable to create DAG file is usually related to your virtual memory set too low or inproperly in Windows. Set to 16 GB minimum

I have installed 20 GB

[golden0707]

again started the miner again and error

Unable to create DAG file is usually related to your virtual memory set too low or inproperly in Windows. Set to 16 GB minimum

I have installed 20 GB

I think you should set exectly vitual memory not RAM to that value.

[mrmaigo]

I get ~138.600MH/S with 7.4 and ~138.500MH/S with 8.0  
5x XFX 470 4gb, Win7

[colmyx]

As on nicehash to run a double extraction of eth and pascal?

You must specify the second coin/algorithm with "-dcoin", from EthDcrMiner64.exe manual:

-dcoin   select second coin to mine in dual mode. Possible options are "-dcoin dcr", "-dcoin sc", "-dcoin lbc", "-dcoin pasc". Default value is "dcr".

Therefore a complete command line to start Ethereum+Lbry would be:

Code:

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal BTCADDR.WORKER -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://lbry.eu.nicehash.com:3356 -dwal BTCADDR.WORKER -mode 0 -dcoin lbc

You might also try Ethereum+Pascal mode (you have to use latest v8.0 EthDcrMiner64.exe miner):

Code:

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal BTCADDR.WORKER -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://pascal.eu.nicehash.com:3358 -dwal BTCADDR.WORKER -mode 0 -dcoin pasc

Best regards,
NiceHash team.

Thanks, I needed this. 

[AzzAz]

Anybody know how can I change color ( from purple ) of temp/fan line?
No color of text or background, just that line?

[marvykkio]

hi all.
I have a problem with the dual miner. etherium in mod 1 is working fine. if I run dual miner, I get an error open CL.
 please help.

virtaul memory 16Gb?

yes.
p.s. I have this problem on different GPU

Batch file config?

EthDcrMiner64.exe -epool stratum+tcp://daggerhashimoto.eu.nicehash.com:3353 -ewal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://pascal.eu.nicehash.com:3358 -dwal 1DrxTn6Nn9NDjkBoy7Ug9w5LXWvGjKbe4j.voron -mode 0 -dcoin pasc
or
#EthDcrMiner64.exe -etha 1 -epool eth-eu1.nanopool.org:9999 -ewal 0x11f6567eacf4acd044995cb3076b8bb513204cf0 -epsw x -dpool stratum+tcp://pasc-eu1.nanopool.org:15555 -dwal 86646-64.b73764e3de6b9758.voron/312@gmail.com -dpsw x -dcoin pasc -dcri 15 -allpools 1 -allcoins 1

I tried a lot of options

-esm 0

[miner417]

When I dual mine, my Eth mining works fine, but my DCR mining just constantly times out, and never actually does anything. I can't figure out why. Here's my batch file, and a screen shot of it happening.

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xB85617504b4AC73fC3236e737436a8F40d29F11c.Rigname -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal 56da2943-ba93-482a-a53b-31ef9b89f8a4 -dcoin dcr -dpsw x

http://imgur.com/a/Q4jTJ

Anyone have any ideas?

[GabryRox]

When I dual mine, my Eth mining works fine, but my DCR mining just constantly times out, and never actually does anything. I can't figure out why. Here's my batch file, and a screen shot of it happening.

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xB85617504b4AC73fC3236e737436a8F40d29F11c.Rigname -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal 56da2943-ba93-482a-a53b-31ef9b89f8a4 -dcoin dcr -dpsw x

http://imgur.com/a/Q4jTJ

Anyone have any ideas?

ummm... is that "yiimp.ccminer" a valid Decred Pool?  I would recommend trying a pool change to see if that fixes your issue. I have been using decredpool.org for about a month and it has been working very well with no issues.

[miner417]

When I dual mine, my Eth mining works fine, but my DCR mining just constantly times out, and never actually does anything. I can't figure out why. Here's my batch file, and a screen shot of it happening.

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal 0xB85617504b4AC73fC3236e737436a8F40d29F11c.Rigname -epsw x -dpool stratum+tcp://yiimp.ccminer.org:4252 -dwal 56da2943-ba93-482a-a53b-31ef9b89f8a4 -dcoin dcr -dpsw x

http://imgur.com/a/Q4jTJ

Anyone have any ideas?

ummm... is that "yiimp.ccminer" a valid Decred Pool?  I would recommend trying a pool change to see if that fixes your issue. I have been using decredpool.org for about a month and it has been working very well with no issues.

I'm retarded on that sense, I copied the tutorial one he has in the readme, and completely forgot to change the pool. Even after that though, I can't seem to get it to work. Can you show me what your batch looks like for it? (Don't show me anything personal of course, just the outline)