Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Oakey22]

Anyone else having trouble with this version? hast rate is up and down like a yoyo unfortunately.

[1715544172]

1715544172

[1715544172]

1715544172

[1715544172]

1715544172

[1715544172]

1715544172

[Zulucia]

Is it possible to dual mine zcash and eth ?

NO. ZCash use both core and memory a lot.

[Blkmktinsurance]

Hi. I'm having issues. I've been mining a while and professionally but I'm still a boob.

I powered off a rig tonight, 3 Hawaii, hashing away fine before.

Added a Tonga 380x.

Powered back on. Reinstalled 16.50 (crimson 16.2.2)
Reboot. All recognized by windows 8.1. Open ethminer

Claymore says

No opencl devices found.
No opencl gpu detected.
-doesnt try to set dag-
Crash

Reinstalled drivers. Nothing
Removed card, went back to three Hawaii, nothing
Reinstalled crimson 15.7 , sane crash and message.

I'm rediscovering anger problems I haven't had since I was 17! I'm flaming mad.

Plus the damn mass effect Andromeda update screwed the launcher up so I can't play that either on my other non miner..

Any ideas, anyone else experienced this before?

[zloyneo]

09:19:18:822   6f0   ETH: job changed
09:19:18:822   6f0   new buf size: 0
09:19:18:822   6f0   ETH: 04/08/17-09:19:18 - New job from coinotron.com:3344
09:19:18:822   6f0   target: 0x0000000100000000 (diff: 4294MH), epoch #116
09:19:18:822   6f0   ETH - Total Speed: 150.783 Mh/s, Total Shares: 834, Rejected: 0, Time: 06:52
09:19:18:822   6f0   ETH: GPU0 29.984 Mh/s, GPU1 30.368 Mh/s, GPU2 30.181 Mh/s, GPU3 30.132 Mh/s, GPU4 30.118 Mh/s
09:19:19:322   6c4   GPU 4 failed
09:19:20:885   480   recv: 51
09:19:20:885   480   srv pck: 50
09:19:20:963   480   srv bs: 0
09:19:20:963   480   sent: 203
09:19:22:666   d4   recv: 51
09:19:22:666   d4   srv pck: 50
09:19:22:760   d4   srv bs: 0
09:19:22:760   d4   sent: 203
09:19:25:916   127c   recv: 51
09:19:25:916   127c   srv pck: 50
09:19:26:010   127c   srv bs: 0
09:19:26:010   127c   sent: 203
09:19:27:682   654   recv: 51
09:19:27:682   654   srv pck: 50
09:19:27:775   654   srv bs: 0
09:19:27:775   654   sent: 203
09:19:30:963   568   recv: 51
09:19:30:963   568   srv pck: 50
09:19:31:057   568   srv bs: 0
09:19:31:057   568   sent: 203
09:19:32:682   13e8   recv: 51
09:19:32:682   13e8   srv pck: 50
09:19:32:760   13e8   srv bs: 0
09:19:32:760   13e8   sent: 203
09:19:34:322   6f0   send: {"id":6,"jsonrpc":"2.0","method":"eth_submitHashrate","params":["0x8f72889", "0x00000000000000000000000000000000000000000000000000000000d95c75a6"]}

09:19:35:291   b4c   GPU0 t=64C fan=59%, GPU1 t=64C fan=60%, GPU2 t=67C fan=69%, GPU3 t=69C fan=70%, GPU4 t=55C fan=70%
09:19:35:291   b4c   em hbt: 0, fm hbt: 46,
09:19:35:291   b4c   watchdog - thread 0, hb time 140
09:19:35:291   b4c   watchdog - thread 1, hb time 0
09:19:35:291   b4c   watchdog - thread 2, hb time 31
09:19:35:291   b4c   watchdog - thread 3, hb time 171
09:19:35:291   b4c   watchdog - thread 4, hb time 203
09:19:35:291   b4c   watchdog - thread 5, hb time 62
09:19:35:291   b4c   watchdog - thread 6, hb time 187
09:19:35:291   b4c   watchdog - thread 7, hb time 46
09:19:35:291   b4c   watchdog - thread 8, hb time 16171
09:19:35:291   b4c   watchdog - thread 9, hb time 31
09:19:35:291   b4c   WATCHDOG: GPU error, you need to restart miner
09:19:35:291   b4c   Rebooting





to all: Why in 9.0 watchdog is triggered, if all the cards are working properly ?

[Makdi]

~snip


Ok.... Got the pause to work.  It is saying that "EthDcrMiner64.exe" is not recognized as an internal or external command?

Look in your folder to see if the exe is still there. I've had my A/V delete it and then the bat opens and insta-closes.

Wow you're right... It did delete it.  Ok so now I can run V9 but still only single mining mode for Eth.  Still getting timeout issue on Dual mode.  Here is a cut of the end of the log after running for a couple of minutes.

15:32:51:495   32f8   ETH: Job timeout, disconnect, retry in 20 sec...
15:32:57:451   11a4   got 397 bytes
15:32:57:463   11a4   buf: {"params":["0000001279f63d32","67335d7ce643497aa3a10f0d6600699b54785293e8283d500000010600000000","003047ba0e2fb6a61eb18da56e3b3caa8fba5fa882313f39e632b85bc6e3e88c0fb726bf1ca83c8 3fba58957b8fea74e0fe8d0edbb0153368e5db7b9a2ce6ecf0100642708c585de0500000066a800 00

Here is my bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress.Caprica -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal Myaddress.Caprica
pause

can you guys see anything wrong in there?

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress.Caprica -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal your btc waller

[coinzoid]

Anyone else having trouble with this version? hast rate is up and down like a yoyo unfortunately.

Yes, I've had same issue. See previous pages for my feedback. I'm back to Eth only mining with asm 0.

[matmator]

Hello

What is the command line to put in the remote manager .bat so that it starts automatically with my saved configuration in option?

thank you in advanceBTC

[Dowper]

Wow, you need some undervolt, now your GPU is drawing ~200W from the wall!

That's with -100mV already, lol. https://i.imgur.com/Hn229LH.png -- been playing around in Wattman but can't get much lower without it hanging. Any suggestions?

Set voltage to 900mV.

[Yerba]

Hello

What is the command line to put in the remote manager .bat so that it starts automatically with my saved configuration in option?

thank you in advanceBTC

What operating system?
In Windows:

start - run - shell:startup - ( make shortcut of your bat file there ).

[valev1]

Anyone else having trouble with this version? hast rate is up and down like a yoyo unfortunately.

I have the same problem, with windows, drivers 17.3.3
with 8.1 it was stable ( both rigs 8xRX480 in total )
with 9.0 ETH hashrate goes up and down, dcr is stable, nomatter the -dcri

[Qazo]

Can someone suggest me which core/memory settings is best for my rig?

modified bios - 1750 straps to 2000 only

5x480 nitro OC+
core 1100  , 1000mv
memory 2100, 1000mv
-dcri 35
- asm 1

eth - 135 mhs / dcr-4700 mhs

980w from wall - is this to much for my Corsair RM1000x  ?
which settings should I change to get lower energy consumption from wall?

[Dowper]

Can someone suggest me which core/memory settings is best for my rig?

modified bios - 1750 straps to 2000 only

5x480 nitro OC+
core 1100  , 1000mv
memory 2100, 1000mv
-dcri 35
- asm 1

eth - 135 mhs / dcr-4700 mhs

980w from wall - is this to much for my Corsair RM1000x  ?
which settings should I change to get lower energy consumption from wall?

-dcri 23.

[Qazo]

Can someone suggest me which core/memory settings is best for my rig?

modified bios - 1750 straps to 2000 only

5x480 nitro OC+
core 1100  , 1000mv
memory 2100, 1000mv
-dcri 35
- asm 1

eth - 135 mhs / dcr-4700 mhs

980w from wall - is this to much for my Corsair RM1000x  ?
which settings should I change to get lower energy consumption from wall?

-dcri 23.

it kills ether+dcr hashes bruttaly

i'm using dcri 30, ether is now 143 h/s, dcr 4300 h/s
https://minerstat.xyz/public/coinmaker.html

but i'm worried about wattage, it didn't crashed from morning (last 6 hours). Is it very bad for PSU to be on that much load? it goes from 960-980w

[coinzoid]

Can someone suggest me which core/memory settings is best for my rig?

modified bios - 1750 straps to 2000 only

5x480 nitro OC+
core 1100  , 1000mv
memory 2100, 1000mv
-dcri 35
- asm 1

eth - 135 mhs / dcr-4700 mhs

980w from wall - is this to much for my Corsair RM1000x  ?
which settings should I change to get lower energy consumption from wall?

-dcri 23.

it kills ether+dcr hashes bruttaly

i'm using dcri 30, ether is now 143 h/s, dcr 4300 h/s
https://minerstat.xyz/public/coinmaker.html

but i'm worried about wattage, it didn't crashed from morning (last 6 hours). Is it very bad for PSU to be on that much load? it goes from 960-980w

You are forcing max load limits on your PSU. Consider adding a second PSU.

[XxsmasxX]

Command line does not work for what reason? R9 290x super heating using command -tstop 75 it for mining, what do I need to add in the command to return automatically after set temperature?

-r 1
-tstop 75
-tt ?

[miner582]

Anyone else having trouble with this version? hast rate is up and down like a yoyo unfortunately.

Yes, I've had same issue. See previous pages for my feedback. I'm back to Eth only mining with asm 0.

There is something wrong with the new version (kernel), use -asm 0. I am doing dual ETH+DCR very stable but using -asm 0.  Unfortunately @Claymore said that he didnt see this behaivor in his gpus, but there are many report of fluctuation in this thread with v9.

[Yerba]

Can someone suggest me which core/memory settings is best for my rig?

modified bios - 1750 straps to 2000 only

5x480 nitro OC+
core 1100  , 1000mv
memory 2100, 1000mv
-dcri 35
- asm 1

eth - 135 mhs / dcr-4700 mhs

980w from wall - is this to much for my Corsair RM1000x  ?
which settings should I change to get lower energy consumption from wall?

I have corsair rm1000i and it takes 980w from wall. 6 x rx480, dualmining with 8.1 Consumption is ok, miner is 100+ hr stable.

[Qazo]

I have corsair rm1000i and it takes 980w from wall. 6 x rx480, dualmining with 8.1 Consumption is ok, miner is 100+ hr stable.

core/memory settings please?
you have 1x gpu more than me and same wattage, so probably  I set something wrong

[marvykkio]

This is the first rig, when starting and nancy, then one of GPU power down





This and rig2, and the same thing happens





This and rig3, all right, to be noted that the GPU are all the same, with the memory samsung 470 8gb, with strap 1625 to 2000.

risers are all 007 version sata attack

I can not figure out how to fix this

[Truthchanter]

!!!!!!!
-For everyone saying their hashrate is now fluctuating with v9.0 and asm 1.. try increasing power limit on your cards. at least like 10-15% and let me know if it makes a difference

While mining on ethermine.org, my effective hashrate over 24 hours is always about 10-15 lower than my reported hashrate. Is this normal? And is that the # I'm getting paid off of?

I mine there too and that is normal for me.. i don't know if other eth pools are better

guys how many incorrect shares you have? I got about 1 / 150-200shares

Same for me, usually at least around 1% a few of my gpus are more like 3% tho (maybe have too high OC or undervolt on these)

Can someone suggest me which core/memory settings is best for my rig?

modified bios - 1750 straps to 2000 only

5x480 nitro OC+
core 1100  , 1000mv
memory 2100, 1000mv
-dcri 35
- asm 1

eth - 135 mhs / dcr-4700 mhs

980w from wall - is this to much for my Corsair RM1000x  ?
which settings should I change to get lower energy consumption from wall?

You want to undervolt to lower the energy consumption. Somewhere between 900mv to 950mv should work well. maybe even 880mv if you're lucky. Make sure you reduce both core and mem voltage to same value too

This is the first rig, when starting and nancy, then one of GPU power down





This and rig2, and the same thing happens





This and rig3, all right, to be noted that the GPU are all the same, with the memory samsung 470 8gb, with strap 1625 to 2000.

risers are all 007 version sata attack

I can not figure out how to fix this

Try increasing power limit on those. if that doesn't work, try playing with clocks, voltages, gpu slot, riser, bios