Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Bones972]

So I have been mining using Claymore Dual V8 but could never get anything other than ETH to work.
 
I tried to switch to Claymore V9 today to see if I could get it up and running.  I tried just ETH but as soon as the mining window opens and starts to scroll, the miner shuts down and closes the window.

There are no logs to view and it happens so fast that I can not even tell what script says in the window before closing. 

Anyone have any suggestions?

Thanks
Bones

[AltScope]

@Claymore,

Could you please check memory controller load? As others stated some cards randomly gets lower load on memory controller and this causes decreased hashrate.

For instance, my average hash rate should be around 264,5 MH/s for my 9 gpu rig. But it displays effective hourly rate around 205.0 MH/s.

I have tested this for more than 7 hours and this is the case for me. Even on ETH only mining using fine tuning and low power bios.

I have exacty the same behaviour. Hashrate reduces randomly when mining decred. Lower -dcri doesnt setting does not help it.

I think this problem is from your settings or pool where you mine. Thats why you have hash rate drop

Its not the pool. Miners shows the hashrate drops too.

It is not the pool is the miner. I reported twice that the hashrate flutuate from 29-24 and 24-29 on each gpu randomly and total average hashrate is lower, back to asm 0 (I have 6xRX480) the dcr is around 500 not 800 but hashrate is stable. Confirm -asm (new kernel) is not stable for RX480

my 480's also fluctuate mildly on the new version dropping from 47 to 36 for a few seconds at a time Im running 2 RX480's at first i thought it was the dcri settings so spent some time adjusting it but regardless of the value it still fluctuates. average hashrate still seems ok though the decred improvements are pretty dam great though

So I have been mining using Claymore Dual V8 but could never get anything other than ETH to work.
 
I tried to switch to Claymore V9 today to see if I could get it up and running.  I tried just ETH but as soon as the mining window opens and starts to scroll, the miner shuts down and closes the window.

There are no logs to view and it happens so fast that I can not even tell what script says in the window before closing. 

Anyone have any suggestions?

Thanks
Bones

put pause on a new line at the end of your script (windows) and see what error you get

[BogdanCo]

So I have been mining using Claymore Dual V8 but could never get anything other than ETH to work.
 
I tried to switch to Claymore V9 today to see if I could get it up and running.  I tried just ETH but as soon as the mining window opens and starts to scroll, the miner shuts down and closes the window.

There are no logs to view and it happens so fast that I can not even tell what script says in the window before closing. 

Anyone have any suggestions?

Thanks
Bones

Open a cmd window and then go to the miner folder and run the bat... the cmd window will stay open and you can see the error.

[Bones972]

@Claymore,

Could you please check memory controller load? As others stated some cards randomly gets lower load on memory controller and this causes decreased hashrate.

For instance, my average hash rate should be around 264,5 MH/s for my 9 gpu rig. But it displays effective hourly rate around 205.0 MH/s.

I have tested this for more than 7 hours and this is the case for me. Even on ETH only mining using fine tuning and low power bios.

I have exacty the same behaviour. Hashrate reduces randomly when mining decred. Lower -dcri doesnt setting does not help it.

I think this problem is from your settings or pool where you mine. Thats why you have hash rate drop

Its not the pool. Miners shows the hashrate drops too.

It is not the pool is the miner. I reported twice that the hashrate flutuate from 29-24 and 24-29 on each gpu randomly and total average hashrate is lower, back to asm 0 (I have 6xRX480) the dcr is around 500 not 800 but hashrate is stable. Confirm -asm (new kernel) is not stable for RX480

my 480's also fluctuate mildly on the new version dropping from 47 to 36 for a few seconds at a time Im running 2 RX480's at first i thought it was the dcri settings so spent some time adjusting it but regardless of the value it still fluctuates. average hashrate still seems ok though the decred improvements are pretty dam great though

So I have been mining using Claymore Dual V8 but could never get anything other than ETH to work.
 
I tried to switch to Claymore V9 today to see if I could get it up and running.  I tried just ETH but as soon as the mining window opens and starts to scroll, the miner shuts down and closes the window.

There are no logs to view and it happens so fast that I can not even tell what script says in the window before closing.  

Anyone have any suggestions?

Thanks
Bones

put pause on a new line at the end of your script (windows) and see what error you get

Still getting the error... says  
ETH Job timeout, disconnect, retry in 20 sec...
Just continues to run timeout error until I stop.  I can go into single mode and run Eth no problem. (V8 not V9)


Ok.... Got the pause to work.  It is saying that "EthDcrMiner64.exe" is not recognized as an internal or external command?

[Xardas2014]

~snip


Ok.... Got the pause to work.  It is saying that "EthDcrMiner64.exe" is not recognized as an internal or external command?

Look in your folder to see if the exe is still there. I've had my A/V delete it and then the bat opens and insta-closes.

[AltScope]

Still getting the error... says  
ETH Job timeout, disconnect, retry in 20 sec...
Just continues to run timeout error until I stop.  I can go into single mode and run Eth no problem. (V8 not V9)

Ok.... Got the pause to work.  It is saying that "EthDcrMiner64.exe" is not recognized as an internal or external command?

Look in your folder to see if the exe is still there. I've had my A/V delete it and then the bat opens and insta-closes.

pita when that happens  

the eth job timeout could just be down to not setting the correct mode for the pool i think thats what kept happening to me when i switched from nicehash to ethpool a few months back, im a bit confused as to how your getting that error if ethdcrminer64 cant be found the bats in the same folder right?

[Xardas2014]

@Claymore I know you have probs with google drive and mega is a pain in our asses. Why don't you just release using torrents? Or at least add a torrent option.

[Bones972]

~snip


Ok.... Got the pause to work.  It is saying that "EthDcrMiner64.exe" is not recognized as an internal or external command?

Look in your folder to see if the exe is still there. I've had my A/V delete it and then the bat opens and insta-closes.

Wow you're right... It did delete it.  Ok so now I can run V9 but still only single mining mode for Eth.  Still getting timeout issue on Dual mode.  Here is a cut of the end of the log after running for a couple of minutes.

15:32:51:495   32f8   ETH: Job timeout, disconnect, retry in 20 sec...
15:32:57:451   11a4   got 397 bytes
15:32:57:463   11a4   buf: {"params":["0000001279f63d32","67335d7ce643497aa3a10f0d6600699b54785293e8283d500000010600000000","003047ba0e2fb6a61eb18da56e3b3caa8fba5fa882313f39e632b85bc6e3e88c0fb726bf1ca83c8 3fba58957b8fea74e0fe8d0edbb0153368e5db7b9a2ce6ecf0100642708c585de0500000066a800 00304f041acc83227e0200000098de0100361300006fe9e75800000000","",[],"03000000","1a044f30","58e7e96f",true],"id":null,"method":"mining.notify"}

15:32:57:474   11a4   parse packet: 396
15:32:57:485   11a4   new buf size: 0
15:32:57:493   11a4    DCR: 04/07/17-15:32:57 - New job from decred.eu.nicehash.com:3354
15:32:57:499   11a4   target: 0x000000003fffc000 (diff: 17GH), block #122520
15:33:11:498   32f8   ETH: Stratum - connecting to 'us1.ethermine.org' <149.56.26.221> port 4444
15:33:11:560   32f8   send: {"id": 1, "method": "mining.subscribe", "params": ["MinerName/1.0.0", "EthereumStratum/1.0.0"]}

15:33:11:571   32f8   send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

15:33:11:582   32f8   send: {"id": 2, "method": "mining.authorize", "params": ["0x4645E5bC4bBfA977F5ef4679532Ea24C8405D5F5.Caprica","x"]}

15:33:11:591   32f8   ETH: Stratum - Connected (us1.ethermine.org:4444)
15:33:11:617   32f8   got 39 bytes
15:33:11:621   32f8   buf: {"id":1,"jsonrpc":"2.0","result":true}

15:33:11:623   32f8   parse packet: 38
15:33:11:626   32f8   new buf size: 0
15:33:11:650   32f8   got 74 bytes
15:33:11:654   32f8   buf: {"id":5,"jsonrpc": "2.0","result": false,"error": "Miner not registered"}

15:33:11:656   32f8   parse packet: 68
15:33:11:659   32f8   new buf size: 0
15:33:11:662   32f8   socket was closed remotely
15:33:11:664   32f8   ETH: Job timeout, disconnect, retry in 20 sec...
15:33:19:457   2300   GPU0 t=38C fan=89%
15:33:19:469   2300   em hbt: 7968, dm hbt: 0, fm hbt: 93,
15:33:19:480   2300   watchdog - thread 0, hb time 15
15:33:19:486   2300   watchdog - thread 1, hb time 62
15:33:19:492   2300   watchdog - thread 2, hb time 31
15:33:19:497   2300   watchdog - thread 3, hb time -16

[Bones972]

~snip


Ok.... Got the pause to work.  It is saying that "EthDcrMiner64.exe" is not recognized as an internal or external command?

Look in your folder to see if the exe is still there. I've had my A/V delete it and then the bat opens and insta-closes.

Wow you're right... It did delete it.  Ok so now I can run V9 but still only single mining mode for Eth.  Still getting timeout issue on Dual mode.  Here is a cut of the end of the log after running for a couple of minutes.

15:32:51:495   32f8   ETH: Job timeout, disconnect, retry in 20 sec...
15:32:57:451   11a4   got 397 bytes
15:32:57:463   11a4   buf: {"params":["0000001279f63d32","67335d7ce643497aa3a10f0d6600699b54785293e8283d500000010600000000","003047ba0e2fb6a61eb18da56e3b3caa8fba5fa882313f39e632b85bc6e3e88c0fb726bf1ca83c8 3fba58957b8fea74e0fe8d0edbb0153368e5db7b9a2ce6ecf0100642708c585de0500000066a800 00

Here is my bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress.Caprica -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal Myaddress.Caprica
pause

can you guys see anything wrong in there?

[Xardas2014]

~snip


Ok.... Got the pause to work.  It is saying that "EthDcrMiner64.exe" is not recognized as an internal or external command?

Look in your folder to see if the exe is still there. I've had my A/V delete it and then the bat opens and insta-closes.

Wow you're right... It did delete it.  Ok so now I can run V9 but still only single mining mode for Eth.  Still getting timeout issue on Dual mode.  Here is a cut of the end of the log after running for a couple of minutes.

15:32:51:495   32f8   ETH: Job timeout, disconnect, retry in 20 sec...
15:32:57:451   11a4   got 397 bytes
15:32:57:463   11a4   buf: {"params":["0000001279f63d32","67335d7ce643497aa3a10f0d6600699b54785293e8283d500000010600000000","003047ba0e2fb6a61eb18da56e3b3caa8fba5fa882313f39e632b85bc6e3e88c0fb726bf1ca83c8 3fba58957b8fea74e0fe8d0edbb0153368e5db7b9a2ce6ecf0100642708c585de0500000066a800 00

Here is my bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress.Caprica -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal Myaddress.Caprica
pause

can you guys see anything wrong in there?

-dpsw x -dcoin dcr

[simsim31]

hello,

please how can i use claymore on coinmine.pl ?

[WhyMe]

hello,

please how can i use claymore on coinmine.pl ?

By reading the readme.txt or the first post ?

[simsim31]

hello,

please how can i use claymore on coinmine.pl ?

By reading the readme.txt or the first post ?

please show me where, i'm new here.

[ofpcarnage]

Currently trying to mine on
http://ubiqminers.org/#

I'm using claymores miner v9
But for whatever reason I keep getting this error and the miner is not running stable at all.
This is on my test rig. I normally set up a bat file on this when everything is stable I roll it out.

My Bat file is as follows
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool pool.ubiqminers.org:8008 -ewal 0xxxxxxxxxxxxxxxxxxxxxxxxxxxxxa7 -eworker rig-5 -epsw x -etha 0 -r 1 -ttli 69 -tstop 72 -ethi 16 -mode 1 -allcoins 1 -esm 0 -allpools 1 -asm 1 -dcri 6

[Trimegistus]

Here is my bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress.Caprica -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal Myaddress.Caprica
pause

can you guys see anything wrong in there?

In ethermine.org you should use -esm 0 or -esm 1

I believe you won't be able to connect properly if you use the wrong stratum mode

[isma]

Nvidia 660 GTX 2Gb works with this version?

[pajche]

Here is my bat file
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100

EthDcrMiner64.exe -epool us1.ethermine.org:4444 -ewal Myaddress.Caprica -epsw x -esm 3 -allpools 1 -estale 0 -dpool stratum+tcp://decred.eu.nicehash.com:3354 -dwal Myaddress.Caprica
pause

can you guys see anything wrong in there?

In ethermine.org you should use -esm 0 or -esm 1

I believe you won't be able to connect properly if you use the wrong stratum mode

remove -esm . Its 0 by deafult. For me it works perfect without that command.

[tuni]

When I setup run dual coin Ethereum + Decred in Claymore 9.0 with "-dcri 20" is the best MH : 157-166MH/s, 3250DRC ?
HOW TO SPEED ALWAYS ~>166MH/s
I use 6 * POWER COLOR 470 4G.  + MSI After bunner :  -48 +5 90 1150 1980 70

[olencore]

Is it possible to dual mine zcash and eth ?

[aarons6]

is there a way to mine on nicehash with ethermine as a backup?

since nicehash needs esm 3 and ethermine needs esm 0?


edit i think i figured it out, in the dpools and epools text.