Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[Lukke]

Hello. There is a message Catalyst 15.12 is REQUIRED. But I am unable to install such old version. Running 17.2.1 Crimson ReLive version. Is it ok for this miner or how to install the old version, if is required? Having RX 480 8 GB with 23.3 MH default or 24.1 MH with 1065/2250. Anyone help please?

[hzavarce]

Hi guys

First wanted to thank Claymore for awesome miner, been mining stable ETH+DCR for a while with no issues( after modding everything to the point im satisfied)

Want to share an issue that don't know why its happening, yesterday decided to give it a go to the new 9.0v to see if I can mine faster DCR while maintaining my current hash rate for ETH, it managed to double my hash rate for DCR while keeping my same hash rate on ETH but I get too many bad shares on DCR and the pool disconnects me, has anyone had the same issue? I placed the same command line i was using in 8.1v (Im doing all of this on Ubuntu latest version)

Had to revert for the moment to 8.1v again to be able to keep mining stable.

[miner417]

Hello. There is a message Catalyst 15.12 is REQUIRED. But I am unable to install such old version. Running 17.2.1 Crimson ReLive version. Is it ok for this miner or how to install the old version, if is required? Having RX 480 8 GB with 23.3 MH default or 24.1 MH with 1065/2250. Anyone help please?

16.11.5 Is the recommended drivers for most people now, try that instead.

Hi guys

First wanted to thank Claymore for awesome miner, been mining stable ETH+DCR for a while with no issues( after modding everything to the point im satisfied)

Want to share an issue that don't know why its happening, yesterday decided to give it a go to the new 9.0v to see if I can mine faster DCR while maintaining my current hash rate for ETH, it managed to double my hash rate for DCR while keeping my same hash rate on ETH but I get too many bad shares on DCR and the pool disconnects me, has anyone had the same issue? I placed the same command line i was using in 8.1v (Im doing all of this on Ubuntu latest version)

Had to revert for the moment to 8.1v again to be able to keep mining stable.

You have to edit the dcri value to try to find a stable setting in V9.0. While in runtime you can you + and - to change it, find stable values for each of your cards, and then set it in the batch file.

[pornluver]

And cannot be closed.

Not even end task in task bar would be able to close it.

Only in 1 rig and only for claymore run through multipoolhubminer

What happen is multipoolhubminer will try to open another claymore with the same problem



It basically stuck at the initial stage

Restarting the rig works.

But kind of a pain. Also if it happens in the middle of the night I am screwed.


It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.

I am using 16.9.1 because it's the only driver that doesn't require bios check.

[hzavarce]

Hello. There is a message Catalyst 15.12 is REQUIRED. But I am unable to install such old version. Running 17.2.1 Crimson ReLive version. Is it ok for this miner or how to install the old version, if is required? Having RX 480 8 GB with 23.3 MH default or 24.1 MH with 1065/2250. Anyone help please?

16.11.5 Is the recommended drivers for most people now, try that instead.

Hi guys

First wanted to thank Claymore for awesome miner, been mining stable ETH+DCR for a while with no issues( after modding everything to the point im satisfied)

Want to share an issue that don't know why its happening, yesterday decided to give it a go to the new 9.0v to see if I can mine faster DCR while maintaining my current hash rate for ETH, it managed to double my hash rate for DCR while keeping my same hash rate on ETH but I get too many bad shares on DCR and the pool disconnects me, has anyone had the same issue? I placed the same command line i was using in 8.1v (Im doing all of this on Ubuntu latest version)

Had to revert for the moment to 8.1v again to be able to keep mining stable.

You have to edit the dcri value to try to find a stable setting in V9.0. While in runtime you can you + and - to change it, find stable values for each of your cards, and then set it in the batch file.

Tried - to change it going little by little but even when I reached the same speed I had in 8.1v it still gives me invalid shares to the point the pool disconnects, no idea if it is because of my custom bios, 173 MH/s ETH and 2603 Mh/s DCR on 9.0V 173 Mh/s ETH and 4812 Mh/s DCR (without modding) currently at 2600 Mh/s but 50/50 accepted and invalid share ratio so pool disconnects

[TechPark]

And cannot be closed.

Not even end task in task bar would be able to close it.

Only in 1 rig and only for claymore run through multipoolhubminer

What happen is multipoolhubminer will try to open another claymore with the same problem



It basically stuck at the initial stage

Restarting the rig works.

But kind of a pain. Also if it happens in the middle of the night I am screwed.


It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.

I am using 16.9.1 because it's the only driver that doesn't require bios check.

- use DDU to uninstall 16.9.1
- install 16.11.5
- install Claymore 9.0, use -asm 0 first
- do not overlclock
- match the required power with no more than 80% of the limit of your PSU
- do not use multipoolhub

Once stable you can mod parameters one by one

[TechPark]

Hello. There is a message Catalyst 15.12 is REQUIRED. But I am unable to install such old version. Running 17.2.1 Crimson ReLive version. Is it ok for this miner or how to install the old version, if is required? Having RX 480 8 GB with 23.3 MH default or 24.1 MH with 1065/2250. Anyone help please?

16.11.5 Is the recommended drivers for most people now, try that instead.

Hi guys

First wanted to thank Claymore for awesome miner, been mining stable ETH+DCR for a while with no issues( after modding everything to the point im satisfied)

Want to share an issue that don't know why its happening, yesterday decided to give it a go to the new 9.0v to see if I can mine faster DCR while maintaining my current hash rate for ETH, it managed to double my hash rate for DCR while keeping my same hash rate on ETH but I get too many bad shares on DCR and the pool disconnects me, has anyone had the same issue? I placed the same command line i was using in 8.1v (Im doing all of this on Ubuntu latest version)

Had to revert for the moment to 8.1v again to be able to keep mining stable.

You have to edit the dcri value to try to find a stable setting in V9.0. While in runtime you can you + and - to change it, find stable values for each of your cards, and then set it in the batch file.

Tried - to change it going little by little but even when I reached the same speed I had in 8.1v it still gives me invalid shares to the point the pool disconnects, no idea if it is because of my custom bios, 173 MH/s ETH and 2603 Mh/s DCR on 9.0V 173 Mh/s ETH and 4812 Mh/s DCR (without modding) currently at 2600 Mh/s but 50/50 accepted and invalid share ratio so pool disconnects

use -asm 0

[scryptr]

A GTX 550TI IS TOO OLD--

It  can not mine Ethereum.  There is not enough memory.  It may mine other algorithms, but it would cost more in electricity to mine the coin than the coin is worth.  If your electricity is free, it is still too slow for practical use.       --scryptr

Claymore 7.4 have cuda suuport

With claymore 7.4 im have this error



im can resolv this?

thanks
Almir

im can mining xmr with gtx550 ?

Dear Friends

how im can  miner ethereum with GTX 550TI ?

Thanks
Almir

A GTX 550TI DOES NOT HAVE ENOUGH MEMORY FOR ETHEREUM MINING--

It is an obsolete card for the purposes of mining.  I earned a LiteCoin (scrypt algo) with one in early 2014, it took several weeks and the coin was worth about $20.       --scryptr

[vapourminer]

I had the hashrate drop for the gpu connected to the monitor/dummy plug with 470's also. I had to mod my driver to run completely headless for the hashrate drop to go away (If you want to ask how try asking google).

I can confirm. I have 6 rigs and one GPU connected to the monitor drops the hash rate and hangs often when using 9.0. Using ASM=0 - no issues.

sounds like what i have, the 470 connected to the kvm gets ~10% lower hashrate. 26 mhs vs the other 470 at 29.x mhs. . asm is on, and -dcri is 30 on both cards.

both ran the same on 8.1

only difference in the 470s is the memory, one samsung, one hynix. both are strap modded.

i am dual mining dcr if that makes any difference

os is windows 7

[miner582]

He's getting better - I ran a test at 1150/2100 with just copied timings quick - his ASM kernel does 29.188 Mh/s. My ASM kernel does 29.72Mh/s (avg 29.65 or so), which is now closer than I'd like...

Wolf,

How to run your kernel? -asm wolf with the price of dcr today dualmining rocks unfortunately the new kernel is not working as it should with the rx470/480 gpus because 800-1000 for each gpu are a huge difference.

Claymore, run some test on rx480 to fix the fluctuation problem on rx480 cards.

Thanks

[hzavarce]

Hello. There is a message Catalyst 15.12 is REQUIRED. But I am unable to install such old version. Running 17.2.1 Crimson ReLive version. Is it ok for this miner or how to install the old version, if is required? Having RX 480 8 GB with 23.3 MH default or 24.1 MH with 1065/2250. Anyone help please?

16.11.5 Is the recommended drivers for most people now, try that instead.

Hi guys

First wanted to thank Claymore for awesome miner, been mining stable ETH+DCR for a while with no issues( after modding everything to the point im satisfied)

Want to share an issue that don't know why its happening, yesterday decided to give it a go to the new 9.0v to see if I can mine faster DCR while maintaining my current hash rate for ETH, it managed to double my hash rate for DCR while keeping my same hash rate on ETH but I get too many bad shares on DCR and the pool disconnects me, has anyone had the same issue? I placed the same command line i was using in 8.1v (Im doing all of this on Ubuntu latest version)

Had to revert for the moment to 8.1v again to be able to keep mining stable.

You have to edit the dcri value to try to find a stable setting in V9.0. While in runtime you can you + and - to change it, find stable values for each of your cards, and then set it in the batch file.

Tried - to change it going little by little but even when I reached the same speed I had in 8.1v it still gives me invalid shares to the point the pool disconnects, no idea if it is because of my custom bios, 173 MH/s ETH and 2603 Mh/s DCR on 9.0V 173 Mh/s ETH and 4812 Mh/s DCR (without modding) currently at 2600 Mh/s but 50/50 accepted and invalid share ratio so pool disconnects

use -asm 0

thanks for the quick response, but just tried it, its still the same, same ammount of valid and incorrect shares

[Claymore]

Claymore, run some test on rx480 to fix the fluctuation problem on rx480 cards.

I use stock cards for tests. Yes at some dcri value I can see memory controller load deviations in GPU-Z, it's about 90% but then it's 65% for a few seconds. For my Nitro+ 480 I see it at "-dcri 47". Try to increase -dcri value a bit, for me "-dcri 50" is stable.
Of course your values will be different if you use different card/bios/clocks.

[KL0nLutiy]

Claymore, run some test on rx480 to fix the fluctuation problem on rx480 cards.

I use stock cards for tests. Yes at some dcri value I can see memory controller load deviations in GPU-Z, it's about 90% but then it's 65% for a few seconds. For my Nitro+ 480 I see it at "-dcri 47". Try to increase -dcri value a bit, for me "-dcri 50" is stable.
Of course your values will be different if you use different card/bios/clocks.

But how to do it stable with dcri 30, when memory controller load can drop to 90 or 65. I think it happend every 5-10 seconds. And also there is a problem, when one card drops hash rate, when teamviewer is working  or monitor is plug on.

[fittsy]

thanks for the quick response, but just tried it, its still the same, same ammount of valid and incorrect shares

Stop. Breathe deep.

Is this suprnova? If so, let it reject 10-20 shares and disconnect you.  It will pause for 20 seconds. Then reconnect.  It should start mining fine after it reconnects.

[pornluver]

And cannot be closed.

Not even end task in task bar would be able to close it.

Only in 1 rig and only for claymore run through multipoolhubminer

What happen is multipoolhubminer will try to open another claymore with the same problem



It basically stuck at the initial stage

Restarting the rig works.

But kind of a pain. Also if it happens in the middle of the night I am screwed.


It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.

I am using 16.9.1 because it's the only driver that doesn't require bios check.

- use DDU to uninstall 16.9.1
- install 16.11.5
- install Claymore 9.0, use -asm 0 first
- do not overlclock
- match the required power with no more than 80% of the limit of your PSU
- do not use multipoolhub

Once stable you can mod parameters one by one

It rarely happens though. So 16.11.5 That means bios check. I got to bypass signature check. I forget how to do so. But I think I can do that. Are you sure this is the issue? Anyone else have similar problem with I do?

[LoveCaptcha]

I'm a total noob and I don't know how to set up this software stuff at all. can anyone help me do this? 

[Teress]

I'm a total noob and I don't know how to set up this software stuff at all. can anyone help me do this? 

On each pool there is some help with miner settings included, folow it...

[miner417]

It rarely happens though. So 16.11.5 That means bios check. I got to bypass signature check. I forget how to do so. But I think I can do that. Are you sure this is the issue? Anyone else have similar problem with I do?

I'm using 16.11.5 with modded strap bios with no issues. I don't know if it's only a difference if you're only modding the straps or not, but it works.

[TechPark]

Hello. There is a message Catalyst 15.12 is REQUIRED. But I am unable to install such old version. Running 17.2.1 Crimson ReLive version. Is it ok for this miner or how to install the old version, if is required? Having RX 480 8 GB with 23.3 MH default or 24.1 MH with 1065/2250. Anyone help please?

16.11.5 Is the recommended drivers for most people now, try that instead.

Hi guys

First wanted to thank Claymore for awesome miner, been mining stable ETH+DCR for a while with no issues( after modding everything to the point im satisfied)

Want to share an issue that don't know why its happening, yesterday decided to give it a go to the new 9.0v to see if I can mine faster DCR while maintaining my current hash rate for ETH, it managed to double my hash rate for DCR while keeping my same hash rate on ETH but I get too many bad shares on DCR and the pool disconnects me, has anyone had the same issue? I placed the same command line i was using in 8.1v (Im doing all of this on Ubuntu latest version)

Had to revert for the moment to 8.1v again to be able to keep mining stable.

You have to edit the dcri value to try to find a stable setting in V9.0. While in runtime you can you + and - to change it, find stable values for each of your cards, and then set it in the batch file.

Tried - to change it going little by little but even when I reached the same speed I had in 8.1v it still gives me invalid shares to the point the pool disconnects, no idea if it is because of my custom bios, 173 MH/s ETH and 2603 Mh/s DCR on 9.0V 173 Mh/s ETH and 4812 Mh/s DCR (without modding) currently at 2600 Mh/s but 50/50 accepted and invalid share ratio so pool disconnects

use -asm 0

thanks for the quick response, but just tried it, its still the same, same ammount of valid and incorrect shares

what is your config/bat file? what re the parameters of OS, cards and PSU?

[TechPark]

And cannot be closed.

Not even end task in task bar would be able to close it.

Only in 1 rig and only for claymore run through multipoolhubminer

What happen is multipoolhubminer will try to open another claymore with the same problem



It basically stuck at the initial stage

Restarting the rig works.

But kind of a pain. Also if it happens in the middle of the night I am screwed.


It's always at the initial stage. Happens very rarely. However, the way multipoolhub did is that it sometimes restart the whole thing.

I am using 16.9.1 because it's the only driver that doesn't require bios check.

- use DDU to uninstall 16.9.1
- install 16.11.5
- install Claymore 9.0, use -asm 0 first
- do not overlclock
- match the required power with no more than 80% of the limit of your PSU
- do not use multipoolhub

Once stable you can mod parameters one by one

It rarely happens though. So 16.11.5 That means bios check. I got to bypass signature check. I forget how to do so. But I think I can do that. Are you sure this is the issue? Anyone else have similar problem with I do?

Man, you provided info and asked for advice. It was given. Try it before questioning integrity. At least try to google for a minute...