Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[vudoto]

Hello guys, i have this problem, when i start the miner the speed is 29.5, but after 20-30sec my speed drop about 24-25 and i can't increase ..... Please someone help me. My card is Sapphire 580 nitro+ 4gb Elpida memory

You should decrese your memory clock. had the same problem, with my 5*580 Rig. Now is stable around 13h.  Try decrese memclock and you will need check HWInfo memory errors.  had a lot of it.

This is happened when i copy 1500 to 2000 timings in bios! What is your speed?

This is happened only with my Asus Dual 8GB with samsung memory. When i wrote UberMix Timing - very unstable at just 2000MHz , much memory errors. Then, i copied 1750 to 2000, that more stable, but ..... Then, i decresed mem clock card by card.

-cvddc 825,825,850,825,825 -cclock 1146,1146,1146,1146,1146 -mclock 2010,2040,1930,1990,1930

1,2 - Armor with uber mix.
3,4,5 - Dual with 1750.

All of these  - ETH =142MHz with DCR = 4550MHz. 

I think this is very low hashrate for these cards, wtih 1750 my speed is 26.4....

[crypto.bin101]

With 4pcs XFX RX580 8GB mod bios, 1000w psu my rig shutdown after a minute when dual mine with decred.

Claymore version: latest
Environment variable: 16000 and try 24000
Win10 64x

BAT file command string:

Code:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal myethwallet.worker100 -epsw x -r 1 -gser 2 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mydcrwallet.worker -dpsw 12345

[SummersideGuy]

With 4pcs XFX RX580 8GB mod bios, 1000w psu my rig shutdown after a minute when dual mine with decred.

Claymore version: latest
Environment variable: 16000 and try 24000
Win10 64x

BAT file command string:

Code:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal myethwallet.worker100 -epsw x -r 1 -gser 2 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mydcrwallet.worker -dpsw 12345

Are you undervolting? Dual mining with these cards with no undervolt would pull about 700-750w just for the GPU's alone. If you undervolt you should able to reduce that to 500. I am not sure if you are as  do not see the settings in your Claymore. but perhaps you are using AB

[crypto.bin101]

With 4pcs XFX RX580 8GB mod bios, 1000w psu my rig shutdown after a minute when dual mine with decred.

Claymore version: latest
Environment variable: 16000 and try 24000
Win10 64x

BAT file command string:

Code:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal myethwallet.worker100 -epsw x -r 1 -gser 2 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mydcrwallet.worker -dpsw 12345

Are you undervolting? Dual mining with these cards with no undervolt would pull about 700-750w just for the GPU's alone. If you undervolt you should able to reduce that to 500. I am not sure if you are as  do not see the settings in your Claymore. but perhaps you are using AB

My AB v4.4 Beta settings works perfectly stable:
Power: 0
Temp: 90
Core: 1165
Memory: 2165
Fan: Auto

Power consumption: 117w Max
Can you suggest AB undervolt settings that will work with DCR dual mining. TIA.

[Ursul0]

having some wild rate fluctuations ( 5+%) on ASrock H110 Pro BTC+ with 12 cards (8*570+4*1060)

[VladimirT]

Hello guys, i have this problem, when i start the miner the speed is 29.5, but after 20-30sec my speed drop about 24-25 and i can't increase ..... Please someone help me. My card is Sapphire 580 nitro+ 4gb Elpida memory

You should decrese your memory clock. had the same problem, with my 5*580 Rig. Now is stable around 13h.  Try decrese memclock and you will need check HWInfo memory errors.  had a lot of it.

This is happened when i copy 1500 to 2000 timings in bios! What is your speed?

This is happened only with my Asus Dual 8GB with samsung memory. When i wrote UberMix Timing - very unstable at just 2000MHz , much memory errors. Then, i copied 1750 to 2000, that more stable, but ..... Then, i decresed mem clock card by card.

-cvddc 825,825,850,825,825 -cclock 1146,1146,1146,1146,1146 -mclock 2010,2040,1930,1990,1930

1,2 - Armor with uber mix.
3,4,5 - Dual with 1750.

All of these  - ETH =142MHz with DCR = 4550MHz. 

I think this is very low hashrate for these cards, wtih 1750 my speed is 26.4....

I don't think so.
28.1 , 28,75 , 28.2 , 29.2, 28.25 - ETH
895,920,900,930,900 - DCR

if i try to get higher mem clock - lot of errors, hashrate slowdown , very unstable rig .  Maby i can do 1,2 cards get higher over 145-146MHz, but i don't want right now, i need time to relax ))) And another one, i had only one psu RM850X Corsair and i don't want to increse vddc .

[SummersideGuy]

With 4pcs XFX RX580 8GB mod bios, 1000w psu my rig shutdown after a minute when dual mine with decred.

Claymore version: latest
Environment variable: 16000 and try 24000
Win10 64x

BAT file command string:

Code:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal myethwallet.worker100 -epsw x -r 1 -gser 2 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mydcrwallet.worker -dpsw 12345

Are you undervolting? Dual mining with these cards with no undervolt would pull about 700-750w just for the GPU's alone. If you undervolt you should able to reduce that to 500. I am not sure if you are as  do not see the settings in your Claymore. but perhaps you are using AB

My AB v4.4 Beta settings works perfectly stable:
Power: 0
Temp: 90
Core: 1165
Memory: 2165
Fan: Auto

Power consumption: 117w Max
Can you suggest AB undervolt settings that will work with DCR dual mining. TIA.

I have the following in my start.bat to undervolt my 570's and 580's  -cvddc 900,900,925,925 -mvddc 900,900,900,900   -cclock 1175,1175,1275,1275 -mclock 2050,2100,2050,2050

I have one 570 that can get 2100+ the rest 570's and 580's are only stable at 2050. for cvddc I put as low as I can get stable and above is what I was able to achieve may be different for you. The cvddc above will drastically lower your cards power consumption. Also I use Claymore to clock my cards as I find it is more stable then AB for some reason I am using Claymore 10. but note I am not using Beta drivers as my rigs run Windows 7 and beta does not work with Claymore on Windows 7. I mine Alt Ethash coins currently getting 29.3 with 1 570, the other at 2100 gets me 30, the 2 580's get me 29.95 at 2050 wish i could push the memory more on those but they crash the amd driver if I do.

[crypto.bin101]

With 4pcs XFX RX580 8GB mod bios, 1000w psu my rig shutdown after a minute when dual mine with decred.

Claymore version: latest
Environment variable: 16000 and try 24000
Win10 64x

BAT file command string:

Code:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal myethwallet.worker100 -epsw x -r 1 -gser 2 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mydcrwallet.worker -dpsw 12345

Are you undervolting? Dual mining with these cards with no undervolt would pull about 700-750w just for the GPU's alone. If you undervolt you should able to reduce that to 500. I am not sure if you are as  do not see the settings in your Claymore. but perhaps you are using AB

My AB v4.4 Beta settings works perfectly stable:
Power: 0
Temp: 90
Core: 1165
Memory: 2165
Fan: Auto

Power consumption: 117w Max
Can you suggest AB undervolt settings that will work with DCR dual mining. TIA.

I have the following in my start.bat to undervolt my 570's and 580's  -cvddc 900,900,925,925 -mvddc 900,900,900,900   -cclock 1175,1175,1275,1275 -mclock 2050,2100,2050,2050

I have one 570 that can get 2100+ the rest 570's and 580's are only stable at 2050. for cvddc I put as low as I can get stable and above is what I was able to achieve may be different for you. The cvddc above will drastically lower your cards power consumption. Also I use Claymore to clock my cards as I find it is more stable then AB for some reason I am using Claymore 10. but note I am not using Beta drivers as my rigs run Windows 7 and beta does not work with Claymore on Windows 7. I mine Alt Ethash coins currently getting 29.3 with 1 570, the other at 2100 gets me 30, the 2 580's get me 29.95 at 2050 wish i could push the memory more on those but they crash the amd driver if I do.

Will definitely try your clock settings. My claymore settings should look like this -cvddc 925 -mvddc 900  -cclock 1275 -mclock 2050, right?

One thing, is it required to reset clocks in AB when clocking through Claymore?

[vudoto]

Hello guys, i have this problem, when i start the miner the speed is 29.5, but after 20-30sec my speed drop about 24-25 and i can't increase ..... Please someone help me. My card is Sapphire 580 nitro+ 4gb Elpida memory

You should decrese your memory clock. had the same problem, with my 5*580 Rig. Now is stable around 13h.  Try decrese memclock and you will need check HWInfo memory errors.  had a lot of it.

This is happened when i copy 1500 to 2000 timings in bios! What is your speed?

This is happened only with my Asus Dual 8GB with samsung memory. When i wrote UberMix Timing - very unstable at just 2000MHz , much memory errors. Then, i copied 1750 to 2000, that more stable, but ..... Then, i decresed mem clock card by card.

-cvddc 825,825,850,825,825 -cclock 1146,1146,1146,1146,1146 -mclock 2010,2040,1930,1990,1930

1,2 - Armor with uber mix.
3,4,5 - Dual with 1750.

All of these  - ETH =142MHz with DCR = 4550MHz. 

I think this is very low hashrate for these cards, wtih 1750 my speed is 26.4....

I don't think so.
28.1 , 28,75 , 28.2 , 29.2, 28.25 - ETH
895,920,900,930,900 - DCR

if i try to get higher mem clock - lot of errors, hashrate slowdown , very unstable rig .  Maby i can do 1,2 cards get higher over 145-146MHz, but i don't want right now, i need time to relax ))) And another one, i had only one psu RM850X Corsair and i don't want to increse vddc .

Thank you man, i mod bios with 1500 and i decrease the memory clock to 2030 and my speed is 29.3 now

[SummersideGuy]

With 4pcs XFX RX580 8GB mod bios, 1000w psu my rig shutdown after a minute when dual mine with decred.

Claymore version: latest
Environment variable: 16000 and try 24000
Win10 64x

BAT file command string:

Code:

EthDcrMiner64.exe -epool eu1.ethermine.org:4444 -ewal myethwallet.worker100 -epsw x -r 1 -gser 2 -dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mydcrwallet.worker -dpsw 12345

Are you undervolting? Dual mining with these cards with no undervolt would pull about 700-750w just for the GPU's alone. If you undervolt you should able to reduce that to 500. I am not sure if you are as  do not see the settings in your Claymore. but perhaps you are using AB

My AB v4.4 Beta settings works perfectly stable:
Power: 0
Temp: 90
Core: 1165
Memory: 2165
Fan: Auto

Power consumption: 117w Max
Can you suggest AB undervolt settings that will work with DCR dual mining. TIA.

I have the following in my start.bat to undervolt my 570's and 580's  -cvddc 900,900,925,925 -mvddc 900,900,900,900   -cclock 1175,1175,1275,1275 -mclock 2050,2100,2050,2050

I have one 570 that can get 2100+ the rest 570's and 580's are only stable at 2050. for cvddc I put as low as I can get stable and above is what I was able to achieve may be different for you. The cvddc above will drastically lower your cards power consumption. Also I use Claymore to clock my cards as I find it is more stable then AB for some reason I am using Claymore 10. but note I am not using Beta drivers as my rigs run Windows 7 and beta does not work with Claymore on Windows 7. I mine Alt Ethash coins currently getting 29.3 with 1 570, the other at 2100 gets me 30, the 2 580's get me 29.95 at 2050 wish i could push the memory more on those but they crash the amd driver if I do.

Will definitely try your clock settings. My claymore settings should look like this -cvddc 925 -mvddc 900  -cclock 1275 -mclock 2050, right?

One thing, is it required to reset clocks in AB when clocking through Claymore?

If you clock through Claymore it will override anything you do in AB

[greatauror28]

Since building my first rig last June, i've always had this rock-stable settings for six of my Asus Dual OC 580s 8GB Samsung memory

-cclock 1260
-mclock 2050
-cvddc 925mV
-mvddc 925mV

This yields me a constant 29.1 to 29.3 across all cards (175 total) and pulls about 1175 up to 1200w. High, I know but they go for weeks until needing a restart.

Earlier this week, I played with them again to squeeze in few more Mh. These are my settings:
-cclock 1140
-mclock 2075
-cvddc 875
-mvddc 875

They average a total of 177.5 now and cards hashes from 29.5 up to 30.0. But the best thing is they now only pull 1035w dual-mining with DCR.

[delle54]

See first post or readme.txt (-di command).

[TunerDude007]

Wondering if you guys can help me. I've been mining for a while and am pretty good at trouble shooting but this one has me stumped.
On my first rig of all Rx 480's I was able to get them back up to 30+ mg/h each once I installed the blockchain driver.
Now my second rig which is an asus prime z270-A has 5 Rx 580's all 8gb. When i first set it up and it was all stock one card would hash at 23 and the 4 would hash at 21. Once I installed blockchain drivers and AB, the one that hashed at 23 now does 27 and the other ones around 23.
Heres the weird part, I cant get the 4 that are stuck 23 any higher, in fact when I turn up the settings in AB I actually loose hashing power from those 4 cards, they go down to 21. While the other card doesn't mind.

Any suggestions? I'd appreciate it

[Swiped]

Wondering if you guys can help me. I've been mining for a while and am pretty good at trouble shooting but this one has me stumped.
On my first rig of all Rx 480's I was able to get them back up to 30+ mg/h each once I installed the blockchain driver.
Now my second rig which is an asus prime z270-A has 5 Rx 580's all 8gb. When i first set it up and it was all stock one card would hash at 23 and the 4 would hash at 21. Once I installed blockchain drivers and AB, the one that hashed at 23 now does 27 and the other ones around 23.
Heres the weird part, I cant get the 4 that are stuck 23 any higher, in fact when I turn up the settings in AB I actually loose hashing power from those 4 cards, they go down to 21. While the other card doesn't mind.

Any suggestions? I'd appreciate it

Which blockchain driver did you use?  I have not found any of them to be stable.  Also, I have had the same results with the Sapphire rx 580 8g cards when changing the bios.  I can't get them to hash as the 480 8g rates that I can get with a simple bios mod.  Always lower, and some of the cards are lower just because and I can't seem to do anything that affects them for the good, and any increase in clock speeds seems to just slow them down.

[VladimirT]

Hello guys, i have this problem, when i start the miner the speed is 29.5, but after 20-30sec my speed drop about 24-25 and i can't increase ..... Please someone help me. My card is Sapphire 580 nitro+ 4gb Elpida memory

You should decrese your memory clock. had the same problem, with my 5*580 Rig. Now is stable around 13h.  Try decrese memclock and you will need check HWInfo memory errors.  had a lot of it.

This is happened when i copy 1500 to 2000 timings in bios! What is your speed?

This is happened only with my Asus Dual 8GB with samsung memory. When i wrote UberMix Timing - very unstable at just 2000MHz , much memory errors. Then, i copied 1750 to 2000, that more stable, but ..... Then, i decresed mem clock card by card.

-cvddc 825,825,850,825,825 -cclock 1146,1146,1146,1146,1146 -mclock 2010,2040,1930,1990,1930

1,2 - Armor with uber mix.
3,4,5 - Dual with 1750.

All of these  - ETH =142MHz with DCR = 4550MHz. 

I think this is very low hashrate for these cards, wtih 1750 my speed is 26.4....

I don't think so.
28.1 , 28,75 , 28.2 , 29.2, 28.25 - ETH
895,920,900,930,900 - DCR

if i try to get higher mem clock - lot of errors, hashrate slowdown , very unstable rig .  Maby i can do 1,2 cards get higher over 145-146MHz, but i don't want right now, i need time to relax ))) And another one, i had only one psu RM850X Corsair and i don't want to increse vddc .

Thank you man, i mod bios with 1500 and i decrease the memory clock to 2030 and my speed is 29.3 now

You'r welcome . hmm.... i will try it too later )

[TRexMcStubyArms]

Hey Everyone,

After many failed attempts, I've run out of options that I currently comprehend and ask for your help.  I'm currently successfully mining Musicoin and unsuccessfully mining DCR out of curiosity and obviously not profit.  No matter what I seem to do, 100% of my DCR shares fail.  Here's what I've gathered and attempted based on reading here, watching YouTube, praying to every god I can think of, etc..

1) Turned off MSI Afterburner (I have 2-1070s)
2) Changed my intensity to 80
3) Tried changing port to 3344 as per other earlier posts
4) Changed back to what suprnova states is correct for Claymore

Code:

-dpool stratum+tcp://dcr.suprnova.cc:3252 -dwal mydcrwallet.worker -dpsw 12345

5) I'm running Claymore 10.0
6) I've tried it on 2 separate machines
7) Again, Musicoin mining is succesful
8 )....
9) Drink
10) Not profiting

Here's what I'm seeing on Claymore

ETH: 10/03/17-21:45:25 - New job from eth-us-east1.nanopool.org:9999
 DCR: 10/03/17-21:45:25 - New job from pasc-eu2.nanopool.org:15555
ETH - Total Speed: 30.469 Mh/s, Total Shares: 0, Rejected: 0, Time: 00:01
ETH: GPU0 0.000 Mh/s, GPU1 30.469 Mh/s
 DCR - Total Speed: 304.692 Mh/s, Total Shares: 2, Rejected: 2
 DCR: GPU0 0.000 Mh/s, GPU1 304.692 Mh/s
ETH: 10/03/17-21:45:25 - SHARE FOUND - (GPU 1)
 DCR: 10/03/17-21:45:25 - SHARE FOUND - (GPU 1)
 DCR: 10/03/17-21:45:25 - New job from pasc-eu2.nanopool.org:15555
 DCR: 10/03/17-21:45:25 - SHARE FOUND - (GPU 0)
 DCR: 10/03/17-21:45:25 - SHARE FOUND - (GPU 0)
 DCR: Share rejected (32 ms)!
ETH: Share accepted (219 ms)!
 DCR: Share rejected (172 ms)!
 DCR: 10/03/17-21:45:26 - New job from pasc-eu2.nanopool.org:15555
 DCR: Share rejected (313 ms)!

This is my batch file

Code:

GPU_FORCE_64BIT_PTR 0
GPU_MAX_HEAP_SIZE 100
GPU_USE_SYNC_OBJECTS 1
GPU_MAX_ALLOC_PERCENT 100
GPU_SINGLE_ALLOC_PERCENT 100
EthDcrMiner64.exe -allpools 1 -epool us.gmc.epool.io:8008 -eworker mymcworker -ewal mymcwallet -epsw x 
-dpool dcr.suprnova.cc:3252 -dwal my suprnova worker -dpsw mysuprnova worker pw -dcoin dcr -allpools 1

If there is something glaringly obvious or I've missed something somewhere back, I apologize in advance.  Thanks for your time.

*flame suit on*

[NewbieMiner17]

having some wild rate fluctuations ( 5+%) on ASrock H110 Pro BTC+ with 12 cards (8*570+4*1060)

https://s1.postimg.org/66gmwuy473/gem-b1.png

Yeah I'm also getting wild fluctuations from as low as 86MH back up to 154MH next minute. Seeing a big knock on the calculated hashrate that is being pulled through by nanopool as well... Specially around the time Dev fee kicks in. Claymore said he was working on something that might ease the impact of dev fee?

[TunerDude007]

Wondering if you guys can help me. I've been mining for a while and am pretty good at trouble shooting but this one has me stumped.
On my first rig of all Rx 480's I was able to get them back up to 30+ mg/h each once I installed the blockchain driver.
Now my second rig which is an asus prime z270-A has 5 Rx 580's all 8gb. When i first set it up and it was all stock one card would hash at 23 and the 4 would hash at 21. Once I installed blockchain drivers and AB, the one that hashed at 23 now does 27 and the other ones around 23.
Heres the weird part, I cant get the 4 that are stuck 23 any higher, in fact when I turn up the settings in AB I actually loose hashing power from those 4 cards, they go down to 21. While the other card doesn't mind.

Any suggestions? I'd appreciate it

Which blockchain driver did you use?  I have not found any of them to be stable.  Also, I have had the same results with the Sapphire rx 580 8g cards when changing the bios.  I can't get them to hash as the 480 8g rates that I can get with a simple bios mod.  Always lower, and some of the cards are lower just because and I can't seem to do anything that affects them for the good, and any increase in clock speeds seems to just slow them down.

Exact same problem here... My 580's are also sapphires.. I'm using latest Blockchain drivers. Anyone else here getting loss in hashing when turning settings up in AB?

[dj--alex]

While using Claymore miner i cannot see Youtube  (im using Linux Mint )

VLC or others player can be used
If i play Castlevania LOS (wine) it plays normally on GTX 1060.
but problem with youtube

One of ways - download any videos from youtube unfortunately is uneasy

P.s.
Please add option for summ to for ONE card only, DevFee to 5%
I think it boost Mh/s for all .

[Mini_Miner]

Thank fo miner. I understand the potential Nvidia not yet been revealed?