Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[greatauror28]

We should just rename this thread as

Newbies thread for all questions related to mining which has been answered X times already

Like seriously, people don't even know how to do proper research and just make this the #1 go to if they want to know about something.

[DuckyODucky]

-

[HartmaniAbit]

thank youclaymore

[WyattS]

Hi guys, i would like to get into ethereum mining but im not sure of how to do the setups.
Currently im trying out mining on my gtx 1070 gaming PC.

I have done nothing except these in my config file and launching the application.
-epool asia1.ethpool.org:3333
-ewal 0x8dbf995E3a1D3506Fed5f7C67E009c6e28e94950
#-epsw x
#-dpool stratum+tcp://yiimp.ccminer.org:4252
#-dwal DsUt9QagrYLvSkJHXCvhfiZHKafVtzd7Sq4
#-dpsw x
#-esm 1
-mode 1
#-tt 70
#-asm 0

Do i need to do anything further?
How do i see my balance?

I have seen this http://ethpool.org/miners/8dbf995E3a1D3506Fed5f7C67E009c6e28e94950 but i still cant figure out which is my balance

If anyone would be patience and assist me on this, i would greatly appreciate it

You're doing a "predictable solo mining pool. 100% of the block reward will be credited to the miner who did contribute the most work to the pool."  Essentially, when you get about 1550 credits (as of now), you'll get a block all to your self.  Otherwise you get nothing until then.  The current page say that'll be about 22 years for you 

[faanigee]

Claymore Dual Miner Patched version

its fully working with Ethereum and its forks...!!!
i packed claymore 10.1 with its patcher you can just download and edit start.bat file..

download link:
https://github.com/faanigee/Claymore-10.1-with-Nodevfee/releases/tag/v10.1


Some useful instructions....!!!

Just place your wallet address into start.bat and start mining at full speed without devfee.
dont use exchage wallet for mining(you can use but you dont have there private key for other coins so consider it)...!!!
use your personal wallet for mining...!!!
you can mine any fork of ethereum like exp, ubiq, pirl etc...
(devfee of fork is mined at ethereum or ethereum classic you can get it using myetherwallet.com) from your fork address...!!!
enjoy free mining...!!!

donations or accepted for future development...!!!
ETH or ETC: 0x61cc1a74b6d0480bd8559b1954718e2400a34ba8

[EthereumPY]

hashrate on SM is still lower than w10 

[Skullyfox]

Claymore Dual Miner Patched version

its fully working with Ethereum and its forks...!!!
i packed claymore 10.1 with its patcher you can just download and edit start.bat file..

download link:
https://github.com/faanigee/Claymore-10.1-with-Nodevfee/releases/tag/v10.1


Some useful instructions....!!!

Just place your wallet address into start.bat and start mining at full speed without devfee.
dont use exchage wallet for mining(you can use but you dont have there private key for other coins so consider it)...!!!
use your personal wallet for mining...!!!
you can mine any fork of ethereum like exp, ubiq, pirl etc...
(devfee of fork is mined at ethereum or ethereum classic you can get it using myetherwallet.com) from your fork address...!!!
enjoy free mining...!!!

donations or accepted for future development...!!!
ETH or ETC: 0x61cc1a74b6d0480bd8559b1954718e2400a34ba8

You sir are a dickhole.

[Gagana]

Hi, Mr.Claymore

Please, make the "-minspeed" option understand, that there is no internet connection, so it doesn't actually mine. So, the reason of hitting "-minspeed" limit is not a hardware issue. So, I don't want the miner restarts (reboot the PC) in this case. You understand, that it triggers all other signaling like e-mail/messages "I have to reboot", "I have been rebooted" and so on from every miner affected.

I use "-minspeed" because of AMD issue with Polaris cards. They published the driver that solves the issue, but sometimes the rig drops the speed to 60Mh instead of 160. And the only cure is to reboot. So, I'm on the fork. I need "-minspeed" to detect the real speed drop problem, but I have troubles with the "-minspeed" logic.

Please, calculate the speed for "-minspeed" only if the mining is really in progress (there is a connection to the pool).

[ffthomas]

hi,

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

[Yohow]

hi,

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

Same here

[Rami84]

hi,

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

Same here

And here too

[P00P135]

hi,

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

Same here

Maybe they are finally fixing the stale share issue, or its just their hosting provider offline.

Edit: https://twitter.com/etherchain_org/with_replies

[kkourmousis]

Hi, Mr.Claymore

Please, make the "-minspeed" option understand, that there is no internet connection, so it doesn't actually mine. So, the reason of hitting "-minspeed" limit is not a hardware issue. So, I don't want the miner restarts (reboot the PC) in this case. You understand, that it triggers all other signaling like e-mail/messages "I have to reboot", "I have been rebooted" and so on from every miner affected.

I guess that there are people who need the opposite from what you describe (they need the -minspeed to get triggered from internet connection loss). I am not one of them but I am sure that there are cases where that makes sense.

I agree with you though on what you are saying. I would modify your request like this:

"Please add a flag that indicates whether internet connection loss will trigger -minspeed"

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

Their domain expired and I bought it. I will now host a website with photos of me drinking non-alcoholic beverages dressed as Winnie the pooh, on this domain.  

[tottoro09]

Faced a problem with gtx 780 3GB, Over time, the speed of mining falls, and the dag file changes. There is a restart of the miner and the speed becomes two times less, that is, if it was 20M / hash, it becomes 10M / hash. Is it possible to solve this?

[crypper]

hi,

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

Same here

And here too

Cannot connect to any of ethermine servers. Dwarfpool - the same problem, but nanopool works fine for ether.
Looks like ZEC flypool is also down.

Edit: confirmed: cannot connect to ZEC flypool, but zec nanopool is ok

[Gaff]

hi,

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

I am not certain about that issue mate, but first thing to do is you must first check you cooling systems and other hardware. I've also encountered overheating but not like that pool is being downed. To determine that you must always back to basic so that with step by step troubleshooting you will eventually solve that problem with no hassle, and lesser time so you can continue the operation again.

[cjclm7]

hi,

ethermine.org pool is down for ~30 minutes, do you know anything about that issue?

I am not certain about that issue mate, but first thing to do is you must first check you cooling systems and other hardware. I've also encountered overheating but not like that pool is being downed. To determine that you must always back to basic so that with step by step troubleshooting you will eventually solve that problem with no hassle, and lesser time so you can continue the operation again.

If you go to Pool Ethermine website ( https://ethermine.org/ )you will see that last block was mined 4h ago... so I do not think it is the miner "cooling systems and other hardware"

[Rickirs]

For all those wondering about various Pools outage :
https://bitcointalk.org/index.php?topic=2378262.0

[RaminBAFS]

Hi guys,
I'm new to this thing literally set up everything today  
Problem is I have a 1080GTX card and been mining for an hour with total share of 15...can't pass 22mh/s! Very disappointing  
I don't want to overclock or anything but I was hoping I could at least get something around 30
Thnx

Sorry, make better research next time before you buy.

Your card is bad for mining ether because it uses GDDR5X memory.
You should have opted for 1070 instead. Do not bother to Overclock it max 1MH/s gain...

Anyways not all is lost, search Zcash mining and go that way instead of Eth.

Your card will do much better there 

Thank you for your response.
Well I purchased parts for gaming but I wanted to see how it mines and sort of experience it! As of now I'm looking for some cheap 580 and whether DAG epoch is going to be a problem for team red in near future or not.
Thnx for the advice I might mine Zcash at nights.

[faanigee]

You sir are a dickhole.

dont show off your self please...!!!