Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v15.0 (Windows/Linux)

[hiramofTyre]

Hey guys I need help.. When I first ran my gpu miner at oc settings it was running fine, until there was a power outage.  When the power came back I turned the miner on and then after one hour it crashes.  I tried to turn it off then remove from the riser and put it back then it would stabilize.  Then the power again, turned it on then it crashes again.

Can anyone help me with this? the error says: NVML: cannot get current temperature, error 999 (an internal driver error occurred)

[Victorio]

Can anyone help me with this? the error says: NVML: cannot get current temperature, error 999 (an internal driver error occurred)

Does the miner work 100% OK at stock settings?

[MikeGR7]

Hi Guys

I'm wondering if you can help me with this.

my rig keeps rebooting shortly after the miner starts on this and I cant figure out why.

I'm using 4 x vegas
1200w PSU
latest blockchain drivers
32gb virtual mem
8gb ram

I've got the fans set manually it wattman to 3000rpm min
I've disabled all other over / underclocking and am just trying to run this as a baseline test before I start playing with the other settings

The miner starts up, runs for a few seconds and then the rig just resets and wattman resets everything.

The rig works brilliantly on cryptonote but I fancied giving some eth dual mining a try for a while.

Anything that would normally cause this type of behaviour?

May i ask your PSU model?

Do not take for granted that since cryptonote runs fine so will Eth cause different algorithms have different electrical behavior and requirements.

I suggest you try to mine only Etherium without second coin.
If it's stable, please measure your power consumption in the wall and tell us how many watts it takes.
If it's not stable even with single Eth, then run Cryptonote and report the power consumption in that case.

We can draw better conclusions with the above data.

[chanyewhau]

The memory size is 6144 MB, memory type is Hynix.
My current OC setting is Power Limit 75%, Core Clock +50, Memory Clock +300, Fan Speed 65%.
With the current OC setting, the cards are running at GPU Clock 1566 MHz, Memory 2152 Mhz. (Based on GPU-Z)
The default clock is 1506 Mhz, Memory 2002 Mhz.

The problematic fan that runs at 100% automatically has the lowest temperature even it is running at 65% like the other cards.
So i dont think the fan switch to 100% due to overheat.

I Got 4 1060 6gb Aorus with samsungs.

I was beating about 3 weeks with strange instabilty wit h my rig. It works OK then BAM! cpu gets loaded up to 80-90% and hash rate drops. Cards seemed ok.
I reinstalled win 7 and win 10 dozens of times. tryed dozens of drves versions and settings.

The problem was EASY - too much overclock!
If you are used to artifacts and freezes due to ooverclock - so in in mining it is strange instabilty. First  sign is MSI AB or any system proces start to use 60-80% of CPU even if miner is stoped! Reboot and lower OC by 5 pints  backwards. watch your rig again until it is stable. then do another -5 and this is you stable OC.

Second sign of GPU error - fan speed in Claymore i 0% i logs.


And dont OC the CORE. ETH needs only Memory OC. Core can be undeclocked for coolnes..

I got 50% power limit, -200 core, +765 Memory. I get 98.2mh by x4 GTX1060 rig power consumtion it 472wh!

You're so on point !
I started to wonder, how come everytime i launch my AF, even with my claymore closed, it takes forever to launch the AF.

Let me try your OC setting. I will come back with the updates.

Thanks alot !

Hello everyone, unfortunately my cards are pretty bad.

Whenever i try to downclock the core, the miner stuck at the 6 cards detected.

So my current setting is 0 core, +300 memory. reaching to about 20.5 MHz per card. Power consumption about 622 watt for 6 cards.

The miner still crash sometimes, but will auto restart.

Is this a good OC setting ?

[unkn0wn0x]

Since today, I am running into problems:

I start the miner, it sets the epoch for all 6 GPUs and then instantly crashes. Does anyone have similar issues? It was working for months now.
Also, I have removed all overclocks and undervolts from the config file, tried ETH only and dual mining. It crashes all the time and I have to manually reboot the rig. The log file always ends after the json line.


Any advice?

[Victorio]

chanyewhau,
Do you understand that 4 or 5 of your GPUs work OK with a +300 MHz memclk increase, while the 5th or the 6th does not? That one crashes the entire mining.
Set all GPUs to stock settings and raise memclk one GPU at a time. Say 1-5 hold +300 MHz, 6 does not hold even +50 MHz. You set +300 MHz for 1 to 5 and 0 MHz for 6.

unkn0wn0x,
That's a banal idea - remove the drivers via DDU and perform a fresh driver install. Perhaps some driver component is corrupt.

[Call_Me_Bambi]

Since today, I am running into problems:

I start the miner, it sets the epoch for all 6 GPUs and then instantly crashes. Does anyone have similar issues? It was working for months now.
Also, I have removed all overclocks and undervolts from the config file, tried ETH only and dual mining. It crashes all the time and I have to manually reboot the rig. The log file always ends after the json line.

Any advice?

If it has been working for months without any problems, and you have not made any changes, then it could be a hardware fault.
I would first check that the power cables into the risers have not started to burn out (I've had a few do this).
The next thing would be the usual, test each card individually, then add the cards back one-at-a-time.

[TheMiner69]

Why is the version not updated on the official GitHub?

https://github.com/nanopool/Claymore-Dual-Miner/releases

Please advise...

[BSAlex]

Got issue running Claymore's Dual Ethereum AMD+NVIDIA GPU Miner v10.1 (Windows 8 64x, latest driver), GTX 970 GPU. Without any changes I am randomly getting two kinds of hashrate: about 21 MH/s|200Mh dual or 9 MH/s and 95 MH/s dual, similar for different coins. Claymore is used via NiceHash 1.8.1.5 aggregator. Anybody experience similar problem? Any ideas how to troubleshoot?

[kkourmousis]

Since today, I am running into problems:

I start the miner, it sets the epoch for all 6 GPUs and then instantly crashes. Does anyone have similar issues? It was working for months now.
Also, I have removed all overclocks and undervolts from the config file, tried ETH only and dual mining. It crashes all the time and I have to manually reboot the rig. The log file always ends after the json line.


Any advice?

Check if any windows updates got installed on the date that your problems began

[TigTex]

Why is the version not updated on the official GitHub?

https://github.com/nanopool/Claymore-Dual-Miner/releases

Please advise...

Do you see the name "nanopool" on the link you posted? That's not the official url to get the miner. Always check the 1st page for the latest release

[unkn0wn0x]

Check if any windows updates got installed on the date that your problems began

If it has been working for months without any problems, and you have not made any changes, then it could be a hardware fault.
I would first check that the power cables into the risers have not started to burn out (I've had a few do this).
The next thing would be the usual, test each card individually, then add the cards back one-at-a-time.

After yet another restart, the problems were resolved. No windows updates either.

Just in case you guys can find anything: Those are the log files when it crashed:

Code:

19:25:42:102	11d4	Check and remove old log files...
19:25:42:116	11d4	args: -epool *deleted by me* -ewal *deleted by me* -epsw x -esm 0 -estale 0 -mode 0 -asm 1 -dcri 20 -cclock 1125 -mvddc 900 -cvddc 900 -mclock 2200,2150,2150,2100,2200,2125 -dcoin lbc -dpool *deleted by me* -dwal *deleted by me* -dpsw *deleted by me* -allpools 1 -ethi 12 

19:25:42:116	11d4	
19:25:42:117	11d4	ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
19:25:42:117	11d4	º     Claymore's Dual ETH + DCR/SC/LBC/PASC GPU Miner v10.1      º
19:25:42:118	11d4	ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
19:25:42:118	11d4	
19:25:42:320	11d4	ETH: 1 pool is specified
19:25:42:321	11d4	Main Ethereum pool is *deleted by me*
19:25:42:321	11d4	LBC: 1 pool is specified
19:25:42:322	11d4	Main LBRY pool is *deleted by me*
19:25:43:362	11d4	OpenCL platform: Intel(R) OpenCL
19:25:43:362	11d4	OpenCL platform: AMD Accelerated Parallel Processing
19:25:43:365	11d4	OpenCL initializing...

19:25:43:365	11d4	AMD Cards available: 6 
19:25:43:366	11d4	GPU #0: Ellesmere, 8192 MB available, 36 compute units
19:25:43:367	11d4	GPU #0 recognized as Radeon RX 480/580
19:25:43:367	11d4	GPU #1: Ellesmere, 8192 MB available, 36 compute units
19:25:43:368	11d4	GPU #1 recognized as Radeon RX 480/580
19:25:43:368	11d4	GPU #2: Ellesmere, 8192 MB available, 36 compute units
19:25:43:369	11d4	GPU #2 recognized as Radeon RX 480/580
19:25:43:369	11d4	GPU #3: Ellesmere, 8192 MB available, 36 compute units
19:25:43:370	11d4	GPU #3 recognized as Radeon RX 480/580
19:25:43:370	11d4	GPU #4: Ellesmere, 8192 MB available, 36 compute units
19:25:43:371	11d4	GPU #4 recognized as Radeon RX 480/580
19:25:43:373	11d4	GPU #5: Ellesmere, 8192 MB available, 36 compute units
19:25:43:374	11d4	GPU #5 recognized as Radeon RX 480/580
19:25:43:374	11d4	POOL/SOLO version
19:25:43:375	11d4	b421 
19:25:43:375	11d4	Platform: Windows
19:25:43:414	11d4	start building OpenCL program for GPU 0...
19:25:43:967	11d4	done
19:25:44:171	11d4	start building OpenCL program for GPU 1...
19:25:44:554	11d4	done
19:25:44:757	11d4	start building OpenCL program for GPU 2...
19:25:45:123	11d4	done
19:25:45:325	11d4	start building OpenCL program for GPU 3...
19:25:45:684	11d4	done
19:25:45:886	11d4	start building OpenCL program for GPU 4...
19:25:46:229	11d4	done
19:25:46:431	11d4	start building OpenCL program for GPU 5...
19:25:46:773	11d4	done
19:25:46:997	11d4	GPU #0: algorithm ASM
19:25:47:020	11d4	GPU #1: algorithm ASM
19:25:47:051	11d4	GPU #2: algorithm ASM
19:25:47:079	11d4	GPU #3: algorithm ASM
19:25:47:107	11d4	GPU #4: algorithm ASM
19:25:47:140	11d4	GPU #5: algorithm ASM
19:25:47:141	11d4	cudaGetDeviceCount failed (35, CUDA driver version is insufficient for CUDA runtime version), probably no CUDA devices
19:25:47:142	11d4	No NVIDIA CUDA GPUs detected.
19:25:47:142	11d4	Total cards: 6 
19:25:47:571	11d4	No NVIDIA cards in the list, NVML library will not be used.
19:25:47:586	1114	Cannot resolve '*deleted by me*'
19:25:47:588	1114	ETH: Stratum - Cannot connect to *deleted by me*
19:25:47:588	1114	ETH: Stratum - Failed to connect, retry in 20 sec...
19:25:47:677	11d4	DUAL MINING MODE ENABLED: ETHEREUM+LBRY

19:25:47:678	11d4	ETH: eth-proxy stratum mode
19:25:47:678	11d4	"-allpools" option is set, default pools can be used for devfee, check "Readme" file for details.
19:25:47:678	11d4	Watchdog enabled
19:25:47:679	11d4	Remote management (READ-ONLY MODE) is enabled on port 3333
19:25:47:679	11d4	

19:25:47:716	6a0	 LBC: Stratum - connecting to *deleted by me*
19:25:47:786	6a0	send: {"id": 1, "method": "mining.subscribe", "params": ["dual 1.0"]}

19:25:47:786	6a0	send: {"id": 5, "method": "mining.extranonce.subscribe", "params": []}

19:25:47:786	6a0	send: {"id": 2, "method": "mining.authorize", "params": [*deleted by me*}

19:25:47:786	6a0	 LBC: Stratum - Connected (*deleted by me*)
19:25:47:828	6a0	got 162 bytes
19:25:47:828	6a0	buf: {"id":1,"result" *deleted by me*" ,"error":null}

19:25:47:829	6a0	parse packet: 161
19:25:47:829	6a0	new buf size: 0
19:25:47:881	6a0	got 514 bytes
19:25:47:881	6a0	buf: {"id":null,"method":"mining.set_difficulty","params":[256]}
{"id":null,"method":"mining.notify","params": *deleted by me*

19:25:47:881	6a0	parse packet: 59
19:25:47:881	6a0	remove first packet 454
19:25:47:882	6a0	new buf size: 454
19:25:47:882	6a0	parse packet: 453
19:25:47:882	6a0	new buf size: 0
19:25:47:955	6a0	got 36 bytes
19:25:47:955	6a0	buf: {"id":2,"result":true,"error":null}

19:25:47:955	6a0	parse packet: 35
19:25:47:955	6a0	 LBC: Authorized
19:25:47:956	6a0	new buf size: 0

[unkn0wn0x]

Also, a general question:

What does your startup file look like (besides the usual parameters, maybe a pause?) and how often do you restart your mining rig (if it all)?
My rig seems to be only crashing after new startups now.

[NewbieMiner17]

But for some reason now I can't run my rig for more than 5 minutes without it getting a hard crash... I've tried running V10 but that also seems to be crashing now. Not really sure what could or might have changed to be causing it to crash now.

Post the last lines of your log files.

ETH only i have 98mh\s on a rig
ETH + DCR (- decri 5 as lowest) i get 94.7 mhs + 159 h/s

Try "-ethi 16 -dcri 15" and "-ethi 16 -dcri 30". Post here the result.
If your electricity cost exceeds 0.10 USD/kWh, dual mining has a slight profitability edge over single mining on nVidia GPUs at the moment. For me, it's not worth the increased power consumption and hardware wear.

hey it finally crashed after about 12 hours... weird though as machine has been solid for so long... sorry I don't know how to paste the log in different format


21:58:45:609   16dc   ETH: GPU0 28.525 Mh/s, GPU1 28.566 Mh/s, GPU2 28.520 Mh/s, GPU3 28.541 Mh/s, GPU4 28.569 Mh/s, GPU5 28.528 Mh/s
21:58:45:609   16dc    LBC - Total Speed: 620.775 Mh/s, Total Shares: 5016, Rejected: 28
21:58:45:609   16dc    LBC: GPU0 103.404 Mh/s, GPU1 103.551 Mh/s, GPU2 103.386 Mh/s, GPU3 103.460 Mh/s, GPU4 103.561 Mh/s, GPU5 103.413 Mh/s
21:58:46:390   12b8   got 599 bytes
21:58:46:390   12b8   buf: {"params":["000000334ca40ca0","e21bac3855471fcc93932b50c0a57dd64a8d1e6ecd6f60649178d1f5bb7ce93b","0a9fc81cc1d69f7df686025d1f291f042a1e2689b7ea83d23cbce20db0a0bd4c","01000000010000000000000000000000000000000000000000000000000000000000000000fffff fff2003272f0404935b0f5a08","0d2f6e6f64655374726174756d2f00000000013cd5d1f0080000001976a914cfab870d6deea54ca 94a41912a75484649e52f2088ac00000000",["d16c686ffe33c0f69ba717c31db65024fc22e0b964382d29b3a5043229e4519a","0aafd3fbcd43ea0eb13f7bf0627366493e5765b461148fe50f3e2b515f53b5c7"],"20000000","1a3cc6b3","5a0f5b93",true],"id":null,"method":"mining.notify"}

21:58:46:390   12b8   parse packet: 598
21:58:46:390   12b8   new buf size: 0
21:58:46:390   12b8    LBC: 11/17/17-21:58:46 - New job from lbry.eu.nicehash.com:3356
21:58:46:390   12b8   target: 0x00000000ffff0000 (diff: 4295MH)
21:58:51:516   16dc   got 206 bytes
21:58:51:516   16dc   buf: {"params":["0000002ed2a7f014","71d6fd365fbfdb38fb35d013e70699b5d49fcca6b24a8dc66f22693d0aaacc7d","0bc36498519244d06d5ad439b514b43ceff6e99210d0e1cfa3d417948df455ab",true],"id":null,"method":"mining.notify"}

21:58:51:516   16dc   parse packet: 205
21:58:51:516   16dc   ETH: job changed
21:58:51:516   16dc   new buf size: 0
21:58:51:516   16dc   ETH: 11/17/17-21:58:51 - New job from daggerhashimoto.eu.nicehash.com:3353
21:58:51:516   16dc   target: 0x0000000112e0be82 (diff: 4000MH), epoch 152(2.19GB)
21:58:51:516   16dc   ETH - Total Speed: 171.260 Mh/s, Total Shares: 1823, Rejected: 1, Time: 10:12
21:58:51:516   16dc   ETH: GPU0 28.554 Mh/s, GPU1 28.556 Mh/s, GPU2 28.534 Mh/s, GPU3 28.534 Mh/s, GPU4 28.549 Mh/s, GPU5 28.532 Mh/s
21:58:51:516   16dc    LBC - Total Speed: 620.813 Mh/s, Total Shares: 5016, Rejected: 28
21:58:51:516   16dc    LBC: GPU0 103.509 Mh/s, GPU1 103.517 Mh/s, GPU2 103.434 Mh/s, GPU3 103.436 Mh/s, GPU4 103.488 Mh/s, GPU5 103.429 Mh/s
21:58:59:907   16dc   got 206 bytes
21:58:59:907   16dc   buf: {"params":["0000002ed2a86a0c","71d6fd365fbfdb38fb35d013e70699b5d49fcca6b24a8dc66f22693d0aaacc7d","97247466e524be056ee21946557ea17a0a932c2dfd166c58c5416a249289af45",true],"id":null,"method":"mining.notify"}

21:58:59:907   16dc   parse packet: 205
21:58:59:907   16dc   ETH: job changed
21:58:59:907   16dc   new buf size: 0
21:58:59:907   16dc   ETH: 11/17/17-21:58:59 - New job from daggerhashimoto.eu.nicehash.com:3353
21:58:59:907   16dc   target: 0x0000000112e0be82 (diff: 4000MH), epoch 152(2.19GB)
21:58:59:907   16dc   ETH - Total Speed: 170.926 Mh/s, Total Shares: 1823, Rejected: 1, Time: 10:12
21:58:59:907   16dc   ETH: GPU0 28.506 Mh/s, GPU1 28.486 Mh/s, GPU2 28.468 Mh/s, GPU3 28.485 Mh/s, GPU4 28.472 Mh/s, GPU5 28.508 Mh/s
21:58:59:907   16dc    LBC - Total Speed: 619.602 Mh/s, Total Shares: 5016, Rejected: 28
21:58:59:907   16dc    LBC: GPU0 103.334 Mh/s, GPU1 103.260 Mh/s, GPU2 103.197 Mh/s, GPU3 103.259 Mh/s, GPU4 103.210 Mh/s, GPU5 103.342 Mh/s
21:59:03:360   16dc   got 206 bytes
21:59:03:360   16dc   buf: {"params":["0000002ed2a89bd3","71d6fd365fbfdb38fb35d013e70699b5d49fcca6b24a8dc66f22693d0aaacc7d","f9f272e7dbf8b8427824037de73ecee331201530cecc72c9f361e70f6244e452",true],"id":null,"method":"mining.notify"}

21:59:03:360   16dc   parse packet: 205
21:59:03:360   16dc   ETH: job changed
21:59:03:360   16dc   new buf size: 0
21:59:03:360   16dc   ETH: 11/17/17-21:59:03 - New job from daggerhashimoto.eu.nicehash.com:3353
21:59:03:360   16dc   target: 0x0000000112e0be82 (diff: 4000MH), epoch 152(2.19GB)
21:59:03:360   16dc   ETH - Total Speed: 167.102 Mh/s, Total Shares: 1823, Rejected: 1, Time: 10:12
21:59:03:360   16dc   ETH: GPU0 24.708 Mh/s, GPU1 28.459 Mh/s, GPU2 28.499 Mh/s, GPU3 28.481 Mh/s, GPU4 28.488 Mh/s, GPU5 28.467 Mh/s
21:59:03:360   16dc    LBC - Total Speed: 605.743 Mh/s, Total Shares: 5016, Rejected: 28
21:59:03:360   16dc    LBC: GPU0 89.566 Mh/s, GPU1 103.162 Mh/s, GPU2 103.310 Mh/s, GPU3 103.243 Mh/s, GPU4 103.269 Mh/s, GPU5 103.193 Mh/s
21:59:05:141   12b8   got 532 bytes
21:59:05:141   12b8   buf: {"params":["000000334ca44f8e","ccbcf0be009bef65798d545fb2326294908052e81e287ee8a0d851fc295d9875","0a9fc81cc1d69f7df686025d1f291f042a1e2689b7ea83d23cbce20db0a0bd4c","01000000010000000000000000000000000000000000000000000000000000000000000000fffff fff2003282f0404a65b0f5a08","0d2f6e6f64655374726174756d2f0000000001b4a8d1f0080000001976a914cfab870d6deea54ca 94a41912a75484649e52f2088ac00000000",["294e9078e749764191cf69c2b1563f3d74d2f4b0a2eeb376015a312733d0d494"],"20000000","1a3f350c","5a0f5ba6",true],"id":null,"method":"mining.notify"}

21:59:05:141   12b8   parse packet: 531
21:59:05:141   12b8   new buf size: 0
21:59:05:141   12b8    LBC: 11/17/17-21:59:05 - New job from lbry.eu.nicehash.com:3356
21:59:05:141   12b8   target: 0x00000000ffff0000 (diff: 4295MH)
21:59:10:860   1184   GPU0 t=58C fan=78%, GPU1 t=59C fan=78%, GPU2 t=55C fan=80%, GPU3 t=53C fan=74%, GPU4 t=51C fan=73%, GPU5 t=49C fan=70%
21:59:10:860   1184   em hbt: 0, dm hbt: 0, fm hbt: 47,
21:59:10:860   1184   watchdog - thread 0 (gpu0), hb time 157
21:59:10:860   1184   watchdog - thread 1 (gpu0), hb time 63
21:59:10:860   1184   watchdog - thread 2 (gpu1), hb time 188
21:59:10:860   1184   watchdog - thread 3 (gpu1), hb time 94
21:59:10:860   1184   watchdog - thread 4 (gpu2), hb time 157
21:59:10:860   1184   watchdog - thread 5 (gpu2), hb time 63
21:59:10:860   1184   watchdog - thread 6 (gpu3), hb time 203
21:59:10:860   1184   watchdog - thread 7 (gpu3), hb time 110
21:59:10:860   1184   watchdog - thread 8 (gpu4), hb time 63
21:59:10:860   1184   watchdog - thread 9 (gpu4), hb time 157
21:59:10:860   1184   watchdog - thread 10 (gpu5), hb time 157
21:59:10:860   1184   watchdog - thread 11 (gpu5), hb time 63
21:59:11:376   16dc   got 206 bytes
21:59:11:376   16dc   buf: {"params":["0000002ed2a8ff9b","71d6fd365fbfdb38fb35d013e70699b5d49fcca6b24a8dc66f22693d0aaacc7d","aa892fe2827a621cc42e2efddfd86570208a2819b9c27a3d67c88d0606d2acdf",true],"id":null,"method":"mining.notify"}

21:59:11:376   16dc   parse packet: 205
21:59:11:376   16dc   ETH: job changed
21:59:11:376   16dc   new buf size: 0
21:59:11:376   16dc   ETH: 11/17/17-21:59:11 - New job from daggerhashimoto.eu.nicehash.com:3353
21:59:11:376   16dc   target: 0x0000000112e0be82 (diff: 4000MH), epoch 152(2.19GB)
21:59:11:376   16dc   ETH - Total Speed: 169.820 Mh/s, Total Shares: 1823, Rejected: 1, Time: 10:13
21:59:11:376   16dc   ETH: GPU0 28.452 Mh/s, GPU1 28.493 Mh/s, GPU2 27.483 Mh/s, GPU3 28.478 Mh/s, GPU4 28.466 Mh/s, GPU5 28.449 Mh/s
21:59:11:376   16dc    LBC - Total Speed: 615.594 Mh/s, Total Shares: 5016, Rejected: 28
21:59:11:376   16dc    LBC: GPU0 103.138 Mh/s, GPU1 103.287 Mh/s, GPU2 99.624 Mh/s, GPU3 103.232 Mh/s, GPU4 103.188 Mh/s, GPU5 103.125 Mh/s
21:59:12:376   1740   LBC: put share nonce 659d33 enonce 1ed
21:59:12:376   1740   LBC round found 1 shares
21:59:12:392   12b8    LBC: 11/17/17-21:59:12 - SHARE FOUND - (GPU 0)
21:59:12:392   12b8   send: {"params": ["1JmQkyDMNYxAA8AMUX9sqLpoVQen4k4E9N", "000000334ca44f8e", "ed0100", "5a0f5ba6", "00659d33"], "id": 10, "method": "mining.submit"}

21:59:12:407   1638   ETH: put share nonce 5615c35556c761da
21:59:12:423   1638   ETH round found 1 shares
21:59:12:438   16dc   ETH: 11/17/17-21:59:12 - SHARE FOUND - (GPU 2)
21:59:12:438   16dc   send: {"id": 12, "method": "mining.submit", "params": ["1JmQkyDMNYxAA8AMUX9sqLpoVQen4k4E9N","0000002ed2a8ff9b","5556c761da"]}

21:59:12:548   16dc   got 37 bytes
21:59:12:548   12b8   got 37 bytes
21:59:12:548   16dc   buf: {"id":12,"result":true,"error":null}

21:59:12:548   12b8   buf: {"id":10,"result":true,"error":null}

21:59:12:548   16dc   parse packet: 36
21:59:12:548   12b8   parse packet: 36
21:59:12:548   16dc   ETH: Share accepted (109 ms)!

21:59:12:548   12b8    LBC: Share accepted (156 ms)!
21:59:12:548   16dc   new buf size: 0
21:59:12:548   12b8   new buf size: 0
21:59:14:470   16dc   got 206 bytes
21:59:14:470   16dc   buf: {"params":["0000002ed2a972ef","71d6fd365fbfdb38fb35d013e70699b5d49fcca6b24a8dc66f22693d0aaacc7d","a3c28458edc3cffd2c2ebcc4c3585ee92ed2bcf44091c67da8920e7a5c80861c",true],"id":null,"method":"mining.notify"}

21:59:14:470   16dc   parse packet: 205
21:59:14:470   16dc   ETH: job changed
21:59:14:470   16dc   new buf size: 0
21:59:14:470   16dc   ETH: 11/17/17-21:59:14 - New job from daggerhashimoto.eu.nicehash.com:3353
21:59:14:470   16dc   target: 0x0000000112e0be82 (diff: 4000MH), epoch 152(2.19GB)
21:59:14:470   16dc   ETH - Total Speed: 170.680 Mh/s, Total Shares: 1824, Rejected: 1, Time: 10:13
21:59:14:470   16dc   ETH: GPU0 28.512 Mh/s, GPU1 28.529 Mh/s, GPU2 28.360 Mh/s, GPU3 28.534 Mh/s, GPU4 28.410 Mh/s, GPU5 28.335 Mh/s
21:59:14:470   16dc    LBC - Total Speed: 618.713 Mh/s, Total Shares: 5017, Rejected: 28
21:59:14:470   16dc    LBC: GPU0 103.355 Mh/s, GPU1 103.417 Mh/s, GPU2 102.804 Mh/s, GPU3 103.436 Mh/s, GPU4 102.987 Mh/s, GPU5 102.714 Mh/s
21:59:17:782   17e8   ETH: put share nonce 5615c32aaff3bb49
21:59:17:782   17e8   ETH round found 1 shares
21:59:17:798   16dc   ETH: 11/17/17-21:59:17 - SHARE FOUND - (GPU 1)
21:59:17:798   16dc   send: {"id": 11, "method": "mining.submit", "params": ["1JmQkyDMNYxAA8AMUX9sqLpoVQen4k4E9N","0000002ed2a972ef","2aaff3bb49"]}

[dunkman23]

Im a beginner Miner.....whats a good GPU to start out with?

[hiramofTyre]

Can anyone help me with this? the error says: NVML: cannot get current temperature, error 999 (an internal driver error occurred)

Does the miner work 100% OK at stock settings?

Yes it does.  But when the power outage comes back the gpu crashes even on default settings..

[MikeGR7]

Im a beginner Miner.....whats a good GPU to start out with?

gtx 1070 or AMD 580

[Victorio]

hey it finally crashed after about 12 hours... weird though as machine has been solid for so long... sorry I don't know how to paste the log in different format

The log file ends unexpectedly, with no error. I suppose that must be some hardware fault. What are your clocks and voltages? You said that the rig was working flawlessly weeks long. Was it dual mining all the time?

Yes it does.  But when the power outage comes back the gpu crashes even on default settings..

Do you use server PSUs? If yes, what model and what is the rated input voltage on your PSU?

[hiramofTyre]

hey it finally crashed after about 12 hours... weird though as machine has been solid for so long... sorry I don't know how to paste the log in different format

The log file ends unexpectedly, with no error. I suppose that must be some hardware fault. What are your clocks and voltages? You said that the rig was working flawlessly weeks long. Was it dual mining all the time?

Yes it does.  But when the power outage comes back the gpu crashes even on default settings..

Do you use server PSUs? If yes, what model and what is the rated input voltage on your PSU?

Is this what you mean bro? : RAVE 500w aps-rv500-p01 . Input 200-240vac 4a 47-53HZ

[NewbieMiner17]

hey it finally crashed after about 12 hours... weird though as machine has been solid for so long... sorry I don't know how to paste the log in different format

The log file ends unexpectedly, with no error. I suppose that must be some hardware fault. What are your clocks and voltages? You said that the rig was working flawlessly weeks long. Was it dual mining all the time?

Yup! nothing has changed which is why I'm a little surprised. I tried running it back on v10 where it was working for longer but that also crashed. went to the rig last night as well but it was working without problems so I didn’t bother restarting and running it