Za1n
Legendary
Offline
Activity: 1078
Merit: 1011
|
|
November 07, 2016, 09:19:32 PM |
|
Added another 5% or so on all my rigs with older cards using the -i 2 switch.
On my Rigs with newer cards, such as the RX series, I actually seen a slight decrease versus version 2.0. I have tried all three intensity levels and even the -i 2 gives a bit less sols and the CPU usage is greater than in version 2.0. I am still playing around as it might have been my lowered clocks, but it seems this version was geared more toward the older cards.
I get about 2-3H/s boost on all my 470s and 480s, 4GB and 8GB versions, most sapphire some others. Just have dual cores, mostly celerons, one APU. You can try setting ZecMiner priority to above normal in task manager, it may help slightly. Also check if other processes are using much CPU. Surely there is more room for improvement on Polaris, but I got boost from 1.1 -> 2.0 -> 2.1 Thanks for the suggestion. I might play around a bit more, but according to Claymore's last post this version was mainly for the older cards anyway. I don't run anything but the miner and VNC on the rigs once I get them dialed in, so I doubt setting the task priority higher will help much, but I will test it out anyway.
|
|
|
|
|
|
The block chain is the main innovation of Bitcoin. It is the
first distributed timestamping system.
|
|
|
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction.
|
|
markus124
|
|
November 07, 2016, 09:26:09 PM |
|
Claymore, maybe u can change the color of the "dev fee shares" from green to blue or something. So people stop asking. Hehe.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 07, 2016, 09:33:41 PM |
|
Claymore, maybe u can change the color of the "dev fee shares" from green to blue or something. So people stop asking. Hehe. I'll think about it, may be it's a good idea. The problem is that as soon as "devfee: connect to..." string is appeared, some people think that devfee mining is started. I don't want to hide any devfee messages, but this misunderstanding is annoying. So may be new color for devfee time is a good idea.
|
|
|
|
dudee
Member
Offline
Activity: 98
Merit: 10
|
|
November 07, 2016, 09:36:21 PM |
|
2x rx470 1080/1880 moded bios, 42/41 h/s 16.10 driver, -i 2 CPU load 70%
|
|
|
|
ghostfaceuk
|
|
November 07, 2016, 09:36:48 PM |
|
Claymore, maybe u can change the color of the "dev fee shares" from green to blue or something. So people stop asking. Hehe. I'll think about it, may be it's a good idea. The problem is that as soon as "devfee: connect to..." string is appeared, some people think that devfee mining is started. I don't want to hide any devfee messages, but this misunderstanding is annoying. So may be new color for devfee time is a good idea. How about yellow to make it really stand out from the rest of the text?
|
|
|
|
e46btc
|
|
November 07, 2016, 09:38:19 PM |
|
Claymore, is this ok that CPU overloaded again in v2.1 with "-i 1 or 2"? CPU exactly, not GPU. And as result higher hashrate at 390x with "-i 0", but not with 1 or 2.
|
|
|
|
arielbit
Legendary
Offline
Activity: 3416
Merit: 1059
|
|
November 07, 2016, 09:38:48 PM Last edit: November 07, 2016, 09:54:30 PM by arielbit |
|
one of my 280x rig won't start mining with "-i 2", just 0 h/s and on and on .. "-i 0" and "-i 1" works
|
|
|
|
xeridea
|
|
November 07, 2016, 09:40:38 PM |
|
Claymore, maybe u can change the color of the "dev fee shares" from green to blue or something. So people stop asking. Hehe. I'll think about it, may be it's a good idea. The problem is that as soon as "devfee: connect to..." string is appeared, some people think that devfee mining is started. I don't want to hide any devfee messages, but this misunderstanding is annoying. So may be new color for devfee time is a good idea. I would leave "Devfee connect..." the same, change color of "Devfee share found", so it is obvious to those who don't read FAQ when it is actually dev mining, and when it is trying to connect.
|
Profitability over time charts for many GPUs - http://xeridea.us/chartsBTC: bc1qr2xwjwfmjn43zhrlp6pn7vwdjrjnv5z0anhjhn LTC: LXDm6sR4dkyqtEWfUbPumMnVEiUFQvxSbZ Eth: 0x44cCe2cf90C8FEE4C9e4338Ae7049913D4F6fC24
|
|
|
carlo_0000
Legendary
Offline
Activity: 1281
Merit: 1003
|
|
November 07, 2016, 09:40:42 PM |
|
22:36:14:490 89c OpenCL error 3 #101 - -61
with 5x sapphire r9 380 2G
also with r9 270 2g, they crash with I 2
but single sapphire r9 380 2G on other computer runs at i2
|
|
|
|
h311m4n
|
|
November 07, 2016, 09:41:02 PM |
|
46S/s on RX470 4Gb 48-50 S/s on RX470 8Gb 56S/s on R390X Thanks claymore
|
|
|
|
alfacro
Member
Offline
Activity: 148
Merit: 10
DigiByte World
|
|
November 07, 2016, 09:43:18 PM |
|
22:36:14:490 89c OpenCL error 3 #101 - -61
with 5x sapphire r9 380 2G
also with r9 270 2g, they crash with I 2
but single sapphire r9 380 2G on other computer runs at i2
same here
|
ETH wallet: 0x12598a2934475aD705DaCd4Bce4d5DDEB519E47C
|
|
|
bardacuda
|
|
November 07, 2016, 09:44:59 PM |
|
I'm getting an extra 5% or so going from 2.0 to 2.1 and using -i 2 on Hawaii cards. CPU usage is only slightly higher and still only seeing partial consistent load across 3 cores on a 3.7GHz Thuban. Uses about 6GB of swapfile instead of 3GB on v2.0. v2.0 (Rock-solid stable for over 19hrs) v2.1 CPU Usage before and after How would you know? You only wrote the program
|
The future will rely on AI. SingularityNET lets anyone create, monetize, and use AI at scale. From the creators of Sophia the Robot.
|
|
|
felixbrucker
|
|
November 07, 2016, 09:50:27 PM |
|
my 7970 went to 47 Sol/s and my 290x to 57 Sol/s, thats some nice improvement (-i 2 used), thanks
|
|
|
|
bit815792215
Member
Offline
Activity: 60
Merit: 10
|
|
November 07, 2016, 09:52:07 PM Last edit: November 07, 2016, 10:59:24 PM by bit815792215 |
|
22:36:14:490 89c OpenCL error 3 #101 - -61
with 5x sapphire r9 380 2G
also with r9 270 2g, they crash with I 2
but single sapphire r9 380 2G on other computer runs at i2
same here r9 270 2g with 1200/1500 -i 2 seem to be fine for me edit: 270x sorry
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 07, 2016, 09:53:51 PM |
|
How would you know? You only wrote the program It's not so difficult to check - download WireShark and check the data traffic from miner. Logfile from miner + Wireshark to confirm data and time.
|
|
|
|
Claymore (OP)
Donator
Legendary
Offline
Activity: 1610
Merit: 1325
Miners developer
|
|
November 07, 2016, 09:56:07 PM |
|
22:36:14:490 89c OpenCL error 3 #101 - -61
with 5x sapphire r9 380 2G
also with r9 270 2g, they crash with I 2
but single sapphire r9 380 2G on other computer runs at i2
same here r9 270 2g with 1200/1500 -i 2 seem to be fine for me In "-i 2" mode miner uses almost 2GB, so some 2GB GPUs may fail.
|
|
|
|
bardacuda
|
|
November 07, 2016, 09:57:54 PM |
|
How would you know? You only wrote the program It's not so difficult to check - download WireShark and check the data traffic from miner. Logfile from miner + Wireshark to confirm data and time. Heheh I was kidding. But good info for any tinfoil hat guys!
|
The future will rely on AI. SingularityNET lets anyone create, monetize, and use AI at scale. From the creators of Sophia the Robot.
|
|
|
ghostfaceuk
|
|
November 07, 2016, 10:03:05 PM |
|
How would you know? You only wrote the program It's not so difficult to check - download WireShark and check the data traffic from miner. Logfile from miner + Wireshark to confirm data and time. Heheh I was kidding. But good info for any tinfoil hat guys! I think some may have the full suit, not just the hat
|
|
|
|
sorry2xs
Legendary
Offline
Activity: 924
Merit: 1000
Dark Passenger Bitcoin miner 2013,Bitcoin node
|
|
November 07, 2016, 10:04:40 PM |
|
Claymore, maybe u can change the color of the "dev fee shares" from green to blue or something. So people stop asking. Hehe. I'll think about it, may be it's a good idea. The problem is that as soon as "devfee: connect to..." string is appeared, some people think that devfee mining is started. I don't want to hide any devfee messages, but this misunderstanding is annoying. So may be new color for devfee time is a good idea. just for clarity for how long does dev fee mine
|
Please tip the Node 1MPWKB23NsZsXHANnFwVAWT86mL24fqAjF; KO4UX THAT NO GOOD DO GOODER BAT!!!
|
|
|
nanona
|
|
November 07, 2016, 10:06:52 PM |
|
I'll think about it, may be it's a good idea. The problem is that as soon as "devfee: connect to..." string is appeared, some people think that devfee mining is started. I don't want to hide any devfee messages, but this misunderstanding is annoying. So may be new color for devfee time is a good idea.
When you are at it please change the color of the temp/fan output line as well. Dark purple on black background in the terminal is impossible to read.
|
|
|
|
|