batko
|
|
November 25, 2016, 09:24:05 AM |
|
R9 380 is the worst graphics card for zcash, Claymore please optimize
|
Donation: ETH: 0x0c8ce94dd3d1bfd09c0f887559c61d1b551e4b4d
|
|
|
nowaltcoin
|
|
November 25, 2016, 09:29:48 AM |
|
Hi,
just to know: who could tell me the hashrate for 7850 and r9 270 not overclocked and undervolted.
Since Version 8.0 i'am thinking about to switch my rigs from ethos (ethereum) to W 7 64-Bit and claymore (zcash)
thx
r7 370 currently 110h/s stock 985mhz core. 7850 is the same? r7 265 too.... right now i'm confused (thanks amd) Let's mak it more easy: r7 370 is a rebranded r7 265... r7 265 is a rebranded HD 7850.... TDP 110w, doing 110H/s (Trinidad / Pitcairn pro) r7 370x is a rebranded r9 270x... r9 270x is a rebranded HD 7870 XT... TDP 150-180w, doing a bit less than 110H/s. (Trinidad xt, Pitcairn XT) Why a r7 370 (7850) beats a 270x? I don't know... theyre the same "chip" in different editions (pro vs xt)...somehow it does, thanks to the drivers, and AMD. note: R7 265 overclocks like a motherf*cker. It's one of the weirdest cards AMD has ever made thx but as far as i know ist a R7 265 a rebranded HD 7850 and a r7 370 a rebranded r 9 270 (without x) so R7 370 = R9 270 = 110 H/s so R7 265 = HD7850 = 92 H/s ?? have a nice day Could you test your HD 7850 at stock speed (860mhz core?) and tell me what's the hashrate? Happy mining, currently ZEC (and for the last weeks) is being more pofitable than eth, better point your rigs to a zec pool. (If you want to hodl eth, exchange zec for it) I have only one HD7850 with 860mhz the other 4 cards have 1000mhz. i will do an dual boot next week (different disk) with W7 64... so i can switch from ethereum to zec just switching the disk......than i will tell you
|
8 * Blackarrow Prospero at Low-Voltage mining @ ckpool.org 12 * GPU's mining ETN/Sumocoin You like to mine something different: https://deutsche-emark.de/
|
|
|
tide881155
Newbie
Offline
Activity: 23
Merit: 0
|
|
November 25, 2016, 09:34:50 AM |
|
Do someone have 200+ h\s on ref.rx480 sapphire?
|
|
|
|
adaseb
Legendary
Offline
Activity: 3794
Merit: 1723
|
|
November 25, 2016, 09:46:09 AM |
|
Hi,
just to know: who could tell me the hashrate for 7850 and r9 270 not overclocked and undervolted.
Since Version 8.0 i'am thinking about to switch my rigs from ethos (ethereum) to W 7 64-Bit and claymore (zcash)
thx
r7 370 currently 110h/s stock 985mhz core. 7850 is the same? r7 265 too.... right now i'm confused (thanks amd) Let's mak it more easy: r7 370 is a rebranded r7 265... r7 265 is a rebranded HD 7850.... TDP 110w, doing 110H/s (Trinidad / Pitcairn pro) r7 370x is a rebranded r9 270x... r9 270x is a rebranded HD 7870 XT... TDP 150-180w, doing a bit less than 110H/s. (Trinidad xt, Pitcairn XT) Why a r7 370 (7850) beats a 270x? I don't know... theyre the same "chip" in different editions (pro vs xt)...somehow it does, thanks to the drivers, and AMD. note: R7 265 overclocks like a motherf*cker. It's one of the weirdest cards AMD has ever made thx but as far as i know ist a R7 265 a rebranded HD 7850 and a r7 370 a rebranded r 9 270 (without x) so R7 370 = R9 270 = 110 H/s so R7 265 = HD7850 = 92 H/s ?? have a nice day Could you test your HD 7850 at stock speed (860mhz core?) and tell me what's the hashrate? Happy mining, currently ZEC (and for the last weeks) is being more pofitable than eth, better point your rigs to a zec pool. (If you want to hodl eth, exchange zec for it) at 860mhz it gets 90h/s at 1050 it gets 105h/s
|
|
|
|
alesx.onfire
|
|
November 25, 2016, 09:51:49 AM Last edit: November 25, 2016, 10:03:13 AM by alesx.onfire |
|
thanks for the info adaseb.
Maybe at 860-900mhz core and 1425 mems it could stay at 100h/s (1425mhz mem is from the classic r7 265)
I'm trying to find the best power efficiency / hashrate
|
|
|
|
oslak
|
|
November 25, 2016, 09:54:05 AM |
|
Is coinmine.pl down?
|
|
|
|
Demarsac
|
|
November 25, 2016, 09:56:22 AM |
|
Hey guys,
One of my rigs is r7 370's (Pitcairn)
After the latest update in my Win 10 for some reason whenever i start Claymore v8 it crashes right after it starts
Any ideas? (without rolling back to pre-update)
Thanks
|
|
|
|
alesx.onfire
|
|
November 25, 2016, 10:04:09 AM |
|
Trinidad pro 1024sp
Stock 860 core 1200 mem: 106h/s (not bad) Oc mem 860 core 1425 mem: 110h/s (just Oc'ing mems) Oc core 900 core 1425 mem: 105h/s testing....
|
|
|
|
kiffner
|
|
November 25, 2016, 10:05:58 AM |
|
my undervolted sapphire r9 270 are doing 115 - 120 sols on win7 at 490 - 500 watts from wall, very nice. I have to use 6xGPUmod to recognize all 5 cards.
|
|
|
|
alesx.onfire
|
|
November 25, 2016, 10:08:29 AM |
|
my undervolted sapphire r9 270 are doing 115 - 120 sols on win7 at 490 - 500 watts from wall, very nice. I have to use 6xGPUmod to recognize all 5 cards.
that's nice 1024sp or 1280? Would you share your undervolt config / freq? thanks in advance, happy mining.
|
|
|
|
ffthomas
|
|
November 25, 2016, 10:14:48 AM |
|
I can't see the GPU temperature and FAN speed in Claymore (not just in v8, in older versions too). I also can't see or set any parameters in WattTool (and only see the GPU temperature and is jumping randomly between 0C and 1924761C). What could be the problem?
I use WIN 10, Catalyst 16.10.3, I have 6*RX470 and 6*RX480 rig, I get the same problem.
This is because RX4x0 cards need at least one monitor connected to the rig. You can use an hdmi dummy plug (from $9 to $15) Thank you guys, I ordered a dummy plug.
|
|
|
|
kiffner
|
|
November 25, 2016, 10:15:32 AM |
|
my undervolted sapphire r9 270 are doing 115 - 120 sols on win7 at 490 - 500 watts from wall, very nice. I have to use 6xGPUmod to recognize all 5 cards.
that's nice 1024sp or 1280? Would you share your undervolt config / freq? thanks in advance, happy mining. 1280. I started undervolting with 1075v, now I am at 1025v... I dont think it can go any lower. 1000gpu/1450mem. its stable for last 24h.
|
|
|
|
alesx.onfire
|
|
November 25, 2016, 10:21:57 AM |
|
1280. I started undervolting with 1075v, now I am at 1025v... I dont think it can go any lower. 1000gpu/1450mem. its stable for last 24h.
thanks for the info, i'll test it with my rig currently i'm 115h/s at 1080/1500mhz... Hey guys,
One of my rigs is r7 370's (Pitcairn)
After the latest update in my Win 10 for some reason whenever i start Claymore v8 it crashes right after it starts
Any ideas? (without rolling back to pre-update)
Thanks
Did you updated your drivers? that could be the problem... if you did, try cleaning up with DDU. I heard that w10 is the worst OS for our "hobby"... and also for privacy.
|
|
|
|
Demarsac
|
|
November 25, 2016, 10:50:41 AM |
|
1280. I started undervolting with 1075v, now I am at 1025v... I dont think it can go any lower. 1000gpu/1450mem. its stable for last 24h.
thanks for the info, i'll test it with my rig currently i'm 115h/s at 1080/1500mhz... Hey guys,
One of my rigs is r7 370's (Pitcairn)
After the latest update in my Win 10 for some reason whenever i start Claymore v8 it crashes right after it starts
Any ideas? (without rolling back to pre-update)
Thanks
Did you updated your drivers? that could be the problem... if you did, try cleaning up with DDU. I heard that w10 is the worst OS for our "hobby"... and also for privacy. Thanks for your input Unfortunately i have already done this process with DDU and re-installing drivers and it didn't work
|
|
|
|
kiffner
|
|
November 25, 2016, 10:57:41 AM |
|
1280. I started undervolting with 1075v, now I am at 1025v... I dont think it can go any lower. 1000gpu/1450mem. its stable for last 24h.
thanks for the info, i'll test it with my rig currently i'm 115h/s at 1080/1500mhz... Hey guys,
One of my rigs is r7 370's (Pitcairn)
After the latest update in my Win 10 for some reason whenever i start Claymore v8 it crashes right after it starts
Any ideas? (without rolling back to pre-update)
Thanks
Did you updated your drivers? that could be the problem... if you did, try cleaning up with DDU. I heard that w10 is the worst OS for our "hobby"... and also for privacy. sometimes helps if you reset radeon settings. gaming/global settings.
|
|
|
|
KrokoTill
Newbie
Offline
Activity: 51
Merit: 0
|
|
November 25, 2016, 11:07:25 AM |
|
v7, driver 16.11.2, -i 4
Win 7 64bit 290 1000/1250 - 217 Sol/s ~180W 280 1000/1500 - 150 Sol/s ~130W
Win 8.1 64bit 370 1175/1500 - 98 Sol/s
v8, -i 6 290 from 217 to 274 Sol/s ~200W 280 from 150 to 190 Sol/s ~140W 370 from 98 to 128 Sol/s v8 -i 3 power usage seems to be about the same as with -i 4 on v7 so the new version is ~25% more power efficient. Intensity 3-4 seem to be the best - only a bit slower than 5 and 6, but 5 consumes more watts and 6 even much more 280 290 whole PC watts (baseline is 103W without mining) -i 0 179 254 409 -i 1 181 254 410 -i 2 185 264 416 -i 3 187 271 419 -i 4 188 272 423 -i 5 189 273 429 -i 6 190 274 443
|
|
|
|
AcaStar
Newbie
Offline
Activity: 13
Merit: 0
|
|
November 25, 2016, 11:18:05 AM |
|
Anyone minining with msi r9 380 how much h/s can i get with this newest version? Dont know is it worth switching from eth to zec. As zec again on over 100 usd...
|
|
|
|
Marnem2.0
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 25, 2016, 11:19:14 AM |
|
but in the future will be in linux OS?
|
|
|
|
Xising
|
|
November 25, 2016, 11:23:16 AM |
|
Anyone minining with msi r9 380 how much h/s can i get with this newest version? Dont know is it worth switching from eth to zec. As zec again on over 100 usd...
If you read a few pages back, you will find the answer.
|
|
|
|
MEDVEDja2
|
|
November 25, 2016, 11:26:02 AM |
|
Genoil 0.6.2 Released miner. Is it worth it to pay attention to it or speed it remained at the same level
|
|
|
|
|