baten
Newbie
Offline
Activity: 38
Merit: 0
|
|
May 23, 2017, 05:21:00 PM Last edit: May 23, 2017, 05:59:13 PM by baten |
|
Can you please explain what is the difference between "device.set.power_limit" and device.set.tpd"?
I have tried to use "device.set.power_limit","params":["0","80"] on my 1070 but it is not applied - although the other params like clock and mem are applied. I must be doing something wrong, but I cannot figure what...
https://github.com/nicehash/excavator/tree/master/api#device-set-power-limitThanks very much - I will look carefully over that list. I get this error sometime - CUDA error "an illegal memory access was encountered" in func "cuda_eq_run" line 2380 -- can you please let me know what it means? What parameter of the overclock is pushed too high? Yep, this means your OC is too high and excavator does safety shutdown (calling on_quit event). A restart script can bring it back on. It is fine if you have few such crashes per day... but not if you have them too often. Also some unstable OCs can somehow corrupt your driver and restart of OS is needed in that case. Indee - I experienced that, after a crash one card was gone from the list, so I had to restart. I will step back a little bit. What would a restart script look like? Or is it this one already provided? :start echo Starting Excavator... excavator.exe -c %COMMAND_FILE% -d %CONSOLE_LOG_LEVEL% -f %FILE_LOG_LEVEL% -p 0 -wp %WEB_PORT% -wi %WEB_HOST% echo Excavator has crashed... restarting in %RESTART_DELAY% seconds... ping 127.0.0.1 -n %RESTART_DELAY% > nul goto start
|
|
|
|
zawawa
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
May 23, 2017, 06:17:14 PM |
|
json file: [ {"time":0,"commands":[ {"id":1,"method":"algorithm.add","params":["equihash","eu1-zcash.flypool.org:3333","wallet.h"]} ]}, {"time":3,"commands":[ {"id":1,"method":"worker.add","params":["0","0","0"]}, {"id":1,"method":"worker.add","params":["0","0","1"]}, {"id":1,"method":"worker.add","params":["0","0","0","1"]}, {"id":1,"method":"worker.add","params":["0","0","1","0"]} ]}, {"time":10,"loop":10,"commands":[ {"id":1,"method":"worker.print.speed","params":["0"]}, {"id":1,"method":"worker.print.speed","params":["1"]}, {"id":1,"method":"worker.print.speed","params":["2"]}, {"id":1,"method":"worker.print.speed","params":["3"]}, {"id":1,"method":"algorithm.print.speeds","params":[""]} ]} ] result: [14:55:34][0x00001490][info] ocl-equihash | Loaded an OpenCL kernel. [14:55:34][0x000006ec][info] ocl-equihash | Loaded an OpenCL kernel. [14:55:34][0x00003380][info] ocl-equihash | Loaded an OpenCL kernel. [14:55:34][0x000033a0][info] ocl-equihash | Loaded an OpenCL kernel. [14:55:35][0x00001490][info] ocl-equihash | GDS segment size: 0 bytes [14:55:34][0x00001490][info] wrkr0-0 | Algorithm: opencl-equihash parameters: BIN=0,GDS=0 [14:55:35][0x000033a0][info] ocl-equihash | GDS segment size: 0 bytes [14:55:34][0x000033a0][info] wrkr0-1 | Algorithm: opencl-equihash parameters: BIN=0,GDS=0 [14:55:36][0x00003380][info] ocl-equihash | GDS segment size: 0 bytes [14:55:34][0x00003380][info] wrkr0-2 | Algorithm: opencl-equihash parameters: BIN=0,GDS=0 [14:55:37][0x000006ec][info] ocl-equihash | GDS segment size: 0 bytes [14:55:34][0x000006ec][info] wrkr0-3 | Algorithm: opencl-equihash parameters: BIN=0,GDS=0 I tried to set equihash parameters , but it seems they are 0 no matter if I set additional params or not That happens with GCN1 cards. I will get to it after the Linux port and ethash.
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
Elder III
|
|
May 24, 2017, 02:43:16 AM |
|
by readme, in order to run equihash one has to run it "as admin" But then the bat file (excavator+web+restart_script.bat) won't start from excavator's folder so in the beginning of bat file one has to add cd to program folder like: @setlocal enableextensions @cd /d "%~dp0" It works with equihash on Pitcairn and Tahiti, but the speed is way lower than optiminer's - 3x slower for Pitcairn and 2x for Tahiti still doesn't work, what the bat should look like, can you give me an example? i don't know where to put the pool and the username and password, i was able to get the webgui though, but that is the only thign that worked for me pool username and password all need to go in the default_command_file.json --- if you are mining on NiceHash you only need the algorithm, nicehash pool, and your BTC address.
|
|
|
|
scryptr
Legendary
Offline
Activity: 1797
Merit: 1028
|
|
May 24, 2017, 05:06:46 PM Last edit: May 24, 2017, 05:25:37 PM by scryptr |
|
NICEHASHMINER V2 ALPHA IS OUT--
I received my alpha-tester notice today. The new NHM v2 alpha still includes Excavator v1.1.4a. It does install nicely, but I am not able to specify the NiceHash server location or the install directory during setup. --scryptr
|
|
|
|
zawawa
Sr. Member
Offline
Activity: 728
Merit: 304
Miner Developer
|
|
May 25, 2017, 04:15:08 AM |
|
I was told that the next alpha version of NHM2 would automatically download the latest version of excavator. We will see...
|
Gateless Gate Sharp, an open-source ETH/XMR miner: http://bit.ly/2rJ2x4VBTC: 1BHwDWVerUTiKxhHPf2ubqKKiBMiKQGomZ
|
|
|
Vaccinus
|
|
May 25, 2017, 08:26:46 AM Last edit: May 26, 2017, 12:36:00 PM by Vaccinus |
|
by readme, in order to run equihash one has to run it "as admin" But then the bat file (excavator+web+restart_script.bat) won't start from excavator's folder so in the beginning of bat file one has to add cd to program folder like: @setlocal enableextensions @cd /d "%~dp0" It works with equihash on Pitcairn and Tahiti, but the speed is way lower than optiminer's - 3x slower for Pitcairn and 2x for Tahiti still doesn't work, what the bat should look like, can you give me an example? i don't know where to put the pool and the username and password, i was able to get the webgui though, but that is the only thign that worked for me pool username and password all need to go in the default_command_file.json --- if you are mining on NiceHash you only need the algorithm, nicehash pool, and your BTC address. something like this work? zec.suprnova.cc:2142 -u anonymous.2 -p x.1 no error this time but it stuck there saying initialized and don't go beyond that
|
|
|
|
usuksobad
Member
Offline
Activity: 107
Merit: 10
|
|
May 26, 2017, 11:45:39 AM |
|
yeah I need a line for equihash on supernova aswell. using it trough awesome miner, don't know what to write in to the command line :/ <<n00b alert>>
|
|
|
|
Elder III
|
|
May 26, 2017, 04:35:56 PM |
|
by readme, in order to run equihash one has to run it "as admin" But then the bat file (excavator+web+restart_script.bat) won't start from excavator's folder so in the beginning of bat file one has to add cd to program folder like: @setlocal enableextensions @cd /d "%~dp0" It works with equihash on Pitcairn and Tahiti, but the speed is way lower than optiminer's - 3x slower for Pitcairn and 2x for Tahiti still doesn't work, what the bat should look like, can you give me an example? i don't know where to put the pool and the username and password, i was able to get the webgui though, but that is the only thign that worked for me pool username and password all need to go in the default_command_file.json --- if you are mining on NiceHash you only need the algorithm, nicehash pool, and your BTC address. something like this work? zec.suprnova.cc:2142 -u anonymous.2 -p x.1 no error this time but it stuck there saying initialized and don't go beyond that It should look like what I have posted below. The amount of parameters in sections 2,3, and 5 will vary depending on how many video cards you are mining with, but the rest should be the same as far as I know. [ {"time":1,"commands":[ {"id":1,"method":"algorithm.add","params":["equihash","equihash.usa.nicehash.com:3357","15UbHz42Zq9ef9ognKbVrB4qtngK3QMhkP"]} ]}, {"time":2,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]}, {"id":1,"method":"worker.add","params":["0","1"]}, {"id":1,"method":"worker.add","params":["0","2"]}, {"id":1,"method":"worker.add","params":["0","3"]} ]}, {"time":5,"commands":[ {"id":1,"method":"device.set.power_limit","params":["0","150"]}, {"id":1,"method":"device.set.core_delta","params":["0","100"]}, {"id":1,"method":"device.set.memory_delta","params":["0","-500"]}, {"id":1,"method":"device.set.power_limit","params":["1","150"]}, {"id":1,"method":"device.set.core_delta","params":["1","100"]}, {"id":1,"method":"device.set.memory_delta","params":["1","-500"]}, {"id":1,"method":"device.set.power_limit","params":["2","150"]}, {"id":1,"method":"device.set.core_delta","params":["2","100"]}, {"id":1,"method":"device.set.memory_delta","params":["2","-500"]}, {"id":1,"method":"device.set.power_limit","params":["3","150"]}, {"id":1,"method":"device.set.core_delta","params":["3","100"]}, {"id":1,"method":"device.set.memory_delta","params":["3","-500"]} ]}, {"time":15,"loop":15,"commands":[ {"id":1,"method":"algorithm.print.speeds","params":[]} ]}, {"event":"on_quit","commands":[ {"id":1,"method":"device.set.tdp","params":["0","100"]}, {"id":1,"method":"device.set.core_delta","params":["0","0"]}, {"id":1,"method":"device.set.memory_delta","params":["0","0"]}, {"id":1,"method":"device.set.tdp","params":["1","100"]}, {"id":1,"method":"device.set.core_delta","params":["1","0"]}, {"id":1,"method":"device.set.memory_delta","params":["1","0"]}, {"id":1,"method":"device.set.tdp","params":["2","100"]}, {"id":1,"method":"device.set.core_delta","params":["2","0"]}, {"id":1,"method":"device.set.memory_delta","params":["2","0"]}, {"id":1,"method":"device.set.tdp","params":["3","100"]}, {"id":1,"method":"device.set.core_delta","params":["3","0"]}, {"id":1,"method":"device.set.memory_delta","params":["3","0"]} ]} ] The items in Green at the top are what you need to change for the algorithm you want to mine, the pool you want to mine at, and your BTC address (some pools will require username and password instead of an address).
|
|
|
|
djeZo
|
|
May 26, 2017, 06:37:03 PM |
|
yeah I need a line for equihash on supernova aswell. using it trough awesome miner, don't know what to write in to the command line :/ <<n00b alert>>
Is awesome miner using latest excavator version?
|
|
|
|
Vaccinus
|
|
May 26, 2017, 07:53:33 PM |
|
by readme, in order to run equihash one has to run it "as admin" But then the bat file (excavator+web+restart_script.bat) won't start from excavator's folder so in the beginning of bat file one has to add cd to program folder like: @setlocal enableextensions @cd /d "%~dp0" It works with equihash on Pitcairn and Tahiti, but the speed is way lower than optiminer's - 3x slower for Pitcairn and 2x for Tahiti still doesn't work, what the bat should look like, can you give me an example? i don't know where to put the pool and the username and password, i was able to get the webgui though, but that is the only thign that worked for me pool username and password all need to go in the default_command_file.json --- if you are mining on NiceHash you only need the algorithm, nicehash pool, and your BTC address. something like this work? zec.suprnova.cc:2142 -u anonymous.2 -p x.1 no error this time but it stuck there saying initialized and don't go beyond that It should look like what I have posted below. The amount of parameters in sections 2,3, and 5 will vary depending on how many video cards you are mining with, but the rest should be the same as far as I know. [ {"time":1,"commands":[ {"id":1,"method":"algorithm.add","params":["equihash","equihash.usa.nicehash.com:3357","15UbHz42Zq9ef9ognKbVrB4qtngK3QMhkP"]} ]}, {"time":2,"commands":[ {"id":1,"method":"worker.add","params":["0","0"]}, {"id":1,"method":"worker.add","params":["0","1"]}, {"id":1,"method":"worker.add","params":["0","2"]}, {"id":1,"method":"worker.add","params":["0","3"]} ]}, {"time":5,"commands":[ {"id":1,"method":"device.set.power_limit","params":["0","150"]}, {"id":1,"method":"device.set.core_delta","params":["0","100"]}, {"id":1,"method":"device.set.memory_delta","params":["0","-500"]}, {"id":1,"method":"device.set.power_limit","params":["1","150"]}, {"id":1,"method":"device.set.core_delta","params":["1","100"]}, {"id":1,"method":"device.set.memory_delta","params":["1","-500"]}, {"id":1,"method":"device.set.power_limit","params":["2","150"]}, {"id":1,"method":"device.set.core_delta","params":["2","100"]}, {"id":1,"method":"device.set.memory_delta","params":["2","-500"]}, {"id":1,"method":"device.set.power_limit","params":["3","150"]}, {"id":1,"method":"device.set.core_delta","params":["3","100"]}, {"id":1,"method":"device.set.memory_delta","params":["3","-500"]} ]}, {"time":15,"loop":15,"commands":[ {"id":1,"method":"algorithm.print.speeds","params":[]} ]}, {"event":"on_quit","commands":[ {"id":1,"method":"device.set.tdp","params":["0","100"]}, {"id":1,"method":"device.set.core_delta","params":["0","0"]}, {"id":1,"method":"device.set.memory_delta","params":["0","0"]}, {"id":1,"method":"device.set.tdp","params":["1","100"]}, {"id":1,"method":"device.set.core_delta","params":["1","0"]}, {"id":1,"method":"device.set.memory_delta","params":["1","0"]}, {"id":1,"method":"device.set.tdp","params":["2","100"]}, {"id":1,"method":"device.set.core_delta","params":["2","0"]}, {"id":1,"method":"device.set.memory_delta","params":["2","0"]}, {"id":1,"method":"device.set.tdp","params":["3","100"]}, {"id":1,"method":"device.set.core_delta","params":["3","0"]}, {"id":1,"method":"device.set.memory_delta","params":["3","0"]} ]} ] The items in Green at the top are what you need to change for the algorithm you want to mine, the pool you want to mine at, and your BTC address (some pools will require username and password instead of an address). ok it worked, but the speed is really slow, how to increase the speed, there is a command for intensity or thread like with old exscavator?
|
|
|
|
denis78
Member
Offline
Activity: 75
Merit: 20
|
|
May 27, 2017, 11:15:01 AM |
|
EWBF's 485 Sol Palit GTX 1070 Jetstream Core 1964 Voltage 0.900 Mem +800 micron
Please give core Curve setting.
|
|
|
|
usuksobad
Member
Offline
Activity: 107
Merit: 10
|
|
May 27, 2017, 03:14:09 PM |
|
yeah I need a line for equihash on supernova aswell. using it trough awesome miner, don't know what to write in to the command line :/ <<n00b alert>>
Is awesome miner using latest excavator version? 1.1.4a its using this version dunno is it latest. What about the line guys []
|
|
|
|
djeZo
|
|
May 27, 2017, 05:49:42 PM |
|
yeah I need a line for equihash on supernova aswell. using it trough awesome miner, don't know what to write in to the command line :/ <<n00b alert>>
Is awesome miner using latest excavator version? 1.1.4a its using this version dunno is it latest. What about the line guys [] Ah okay. v1.1.4a doesn't have special EULA, but 1.2+ does and it cannot be bundled with any other miner/package without our permission.
|
|
|
|
patrike
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
May 27, 2017, 07:51:44 PM |
|
yeah I need a line for equihash on supernova aswell. using it trough awesome miner, don't know what to write in to the command line :/ <<n00b alert>>
Is awesome miner using latest excavator version? 1.1.4a its using this version dunno is it latest. What about the line guys [] Ah okay. v1.1.4a doesn't have special EULA, but 1.2+ does and it cannot be bundled with any other miner/package without our permission. It's correct that it's Excavator 1.1.4 that can be automatically downloaded from Awesome Miner today. Thanks for pointing out the EULA changes because I might have missed them otherwise. Awesome Miner doesn't bundle any mining software, but can do automatic download on demand. So I assume this is the point we need to discuss for the future versions?
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
djeZo
|
|
May 27, 2017, 08:41:21 PM |
|
yeah I need a line for equihash on supernova aswell. using it trough awesome miner, don't know what to write in to the command line :/ <<n00b alert>>
Is awesome miner using latest excavator version? 1.1.4a its using this version dunno is it latest. What about the line guys [] Ah okay. v1.1.4a doesn't have special EULA, but 1.2+ does and it cannot be bundled with any other miner/package without our permission. It's correct that it's Excavator 1.1.4 that can be automatically downloaded from Awesome Miner today. Thanks for pointing out the EULA changes because I might have missed them otherwise. Awesome Miner doesn't bundle any mining software, but can do automatic download on demand. So I assume this is the point we need to discuss for the future versions? Yes, but EULA doesn't even permit you to do remote downloading. You cannot distribute Excavator v1.2+ in any way, except of course, if you get permission from NiceHash.
|
|
|
|
patrike
Legendary
Offline
Activity: 3458
Merit: 1095
|
|
May 27, 2017, 08:46:07 PM |
|
yeah I need a line for equihash on supernova aswell. using it trough awesome miner, don't know what to write in to the command line :/ <<n00b alert>>
Is awesome miner using latest excavator version? 1.1.4a its using this version dunno is it latest. What about the line guys [] Ah okay. v1.1.4a doesn't have special EULA, but 1.2+ does and it cannot be bundled with any other miner/package without our permission. It's correct that it's Excavator 1.1.4 that can be automatically downloaded from Awesome Miner today. Thanks for pointing out the EULA changes because I might have missed them otherwise. Awesome Miner doesn't bundle any mining software, but can do automatic download on demand. So I assume this is the point we need to discuss for the future versions? Yes, but EULA doesn't even permit you to do remote downloading. You cannot distribute Excavator v1.2+ in any way, except of course, if you get permission from NiceHash. Thanks for the clarification. Let's continue by PM.
|
Awesome Miner - Complete solution to manage and monitor mining operations of ASIC, GPU and CPU miners Optimized Antminer firmware - Increased hashrate, improved power efficiency and more features. For S9, S9i, S9j, T9+, L3+, S17, S17 Pro, S17+, T17, T17+, S19, S19 Pro, S19j, S19j Pro, T19 Up to 200,000 miners | Notifications | Native overclocking | Profit switching | Customizable rules | API | Windows application | Mobile web
|
|
|
mez
|
|
May 27, 2017, 09:20:37 PM |
|
great miner thanks for developing this =)
about 650 sol on a nvidia 1080TI
|
|
|
|
jonfrakes
Newbie
Offline
Activity: 27
Merit: 0
|
|
May 27, 2017, 11:40:23 PM |
|
Are the 435 Sol/s for Nvidia GTX 1070's stock values? When I run excavator I always get around 333 Sol/s on stock values for Asus GTX 1070 Dual OC. Can anyone enlighten me about this?
|
|
|
|
djeZo
|
|
May 27, 2017, 11:45:24 PM |
|
Are the 435 Sol/s for Nvidia GTX 1070's stock values? When I run excavator I always get around 333 Sol/s on stock values for Asus GTX 1070 Dual OC. Can anyone enlighten me about this?
Make sure you launch two workers and not only 1. 1 is used for low intensity.
|
|
|
|
jonfrakes
Newbie
Offline
Activity: 27
Merit: 0
|
|
May 28, 2017, 12:26:43 AM Last edit: May 28, 2017, 12:45:17 AM by jonfrakes |
|
Yeah, but I only have one GTX 1070 for testing purposes. So I should run two instances of excavator using the same card?
Edit:
I added the following to the start_equihash+restart_script.bat in excavator directory:
excavator.exe -a equihash -s equihash.%LOCATION%.nicehash.com:3357 -u %BTCADDR%.%WORKER%:x -d %DEBUG_MODE% -cd 0 0
Is -cd 0 0 the way to add workers? I still get the same 320+ H/s value.
|
|
|
|
|