Haasonline Simple Trade Bot For BTCe and Bitstamp[Main topic]

[maxim4eg123]

is there any automated arbitrage opportunities?

[1715164834]

1715164834

[krach]

is there any automated arbitrage opportunities?

not yet.....

[Bajawah]

Has anyone noticed it's almost impossible to trade DOGE on Cryptsy due to the volume sitting at each price?

Bot or not.

Unless you are wanting to move 15 BTC orders it seems like your order will never get filled.

Perhaps you need to move in 5+ BTC orders?

Anyone have any experience in this?

[LDeneault]

Has anyone noticed it's almost impossible to trade DOGE on Cryptsy due to the volume sitting at each price?

Bot or not.

Unless you are wanting to move 15 BTC orders it seems like your order will never get filled.

Perhaps you need to move in 5+ BTC orders?

Anyone have any experience in this?

I don't know if I'm having the same issue as you, but I can say that in all the time that I've had a bot attempting to trade DOGE/BTC on Cryptsy (~ a month) that Cryptsy has never once accepted either a buy or sell order from the bot.

There have never been any STB-related errors in the logs, either - just messages indicating that Cryptsy did not fill the order.

[Bajawah]

Has anyone noticed it's almost impossible to trade DOGE on Cryptsy due to the volume sitting at each price?

Bot or not.

Unless you are wanting to move 15 BTC orders it seems like your order will never get filled.

Perhaps you need to move in 5+ BTC orders?

Anyone have any experience in this?

I don't know if I'm having the same issue as you, but I can say that in all the time that I've had a bot attempting to trade DOGE/BTC on Cryptsy (~ a month) that Cryptsy has never once accepted either a buy or sell order from the bot.

There have never been any STB-related errors in the logs, either - just messages indicating that Cryptsy did not fill the order.

Yea, thats the same business. Go look at the cryptsy page. At each point it's about 10+ BTC. Unless you are going to drop that much (in the hopes of half fill), it seems like a lost cause.

Anyone elses input?

example
Sell orders
Price (BTC)   DOGE   Total                  (BTC)
0.00000107   14483797.69219337   15.49766353
0.00000108   16753228.75780187   18.09348706
0.00000109   22503629.94780660   24.52895664
0.00000110   23507417.07510483   25.85815878
0.00000111   22877414.54066831   25.39393014
0.00000112   27836106.42102879   31.17643919
0.00000113   30206255.14351613   34.13306831
0.00000114   31094320.31424473   35.44752516
0.00000115   38765994.24077795   44.58089338
0.00000116   7744745.81621080   8.98390515

 Buy Orders
Price (BTC)   DOGE   Total                  (BTC)
0.00000106   578849.53788753           0.61358051
0.00000105   21991071.45495910   23.09062503
0.00000104   32729119.48711389   34.03828427
0.00000103   17944188.65152126   18.48251431
0.00000102   17812444.97280750   18.16869387
0.00000101   18817150.73901424   19.00532225
0.00000100   33207574.43434447   33.20757443
0.00000099   22531746.97109096   22.30642950
0.00000098   21344514.58565430   20.91762429
0.00000097   16883186.89236294   16.37669129

[Bajawah]

Has anyone found a solution to the MA/MACD giving inverse indicators? Upon searching this thread, it appears to be a old issue.

New bot, with a MACD-Histogram (default settings) will 99.9% of the time buy high and sell low.

So, the question is, how do we reverse this? lol

When I get home I am going to see if I can make two indicators and push one response right and one response left. Then set one as only giving sell indicators and the other only giving buy. May work, may not.

At this point though, the MA/MACD is almost pointless...

Unless I have missed something?

[krach]

MACD follows the trend, using it alone is not a good idea.

[Bajawah]

MACD follows the trend, using it alone is not a good idea.

Right, I totally get that.

But it's giving the opposite advice it should.

I'm not on my home computer, so I can't post the logs until tonight.

[LDeneault]

Is anyone else having a problem connecting STB to Bitstamp?

For two days I've been creating and activating API keys on Bitstamp and have been adding them to STB but the software never indicates that it successfully connects.  It's worked in the past without any issue so it's not a chair-keyboard interface issue.

[SalemB]

Hi

Can anyone help me with the following questions? (I've only just purchased the software, so I am not yet sure about things)

1. Once I've setup my bot and used auto setup to generate the settings, will redoing auto setup on a daily basis help the bot or should I leave it alone.

2. If my bot places an order which doesn't complete in time for the bot, should I cancel it so the bot can use the coins or ignore it (since if I wait long enough the order will probably be fulfilled eventually).

Thanks!

[Pengju]

I found Hasabot is selling on another website, is it a scam or just an branch website?
http://bitcoinbotreview.com/

[krach]

I found Hasabot is selling on another website, is it a scam or just an branch website?
http://bitcoinbotreview.com/

This is the only other "branch" partner site selling licences with permission
http://advancedtradebot.com
You still download the software from haasonline.com but get the licence form the site.

[Bajawah]

Has anyone had any luck with the [EarningsOnPercentageTrade Indicator]?

During backtests it seemed very very profitable, but in practice it went no where.

From watching the indicator graph, the best I can guess is that the bot will only buy if [last sell price - X%] and it will only sell if [last buy price + X%].

The issue I had was when trading yesterday was I bought in at (example #s) $9.00 and then sold at $10.20 for a profit.

Price then climbed to $11.00 and didn't come down for the rest of the day.

But because it never returned to within [last sell price - X%], the bot stuck and wouldn't trade.

Unless I am using this indicator wrong, it seems like it will always miss upward trends.

----

The indicator almost seems like a combination of [BlindSignal Indicator] and [PercentageChange Insurance], yea?

----

I'm tempted to throw it .25 BTC and see what [EarningsOnPercentageTrade Indicator] can do over a week. haha

[Bajawah]

Hi

Can anyone help me with the following questions? (I've only just purchased the software, so I am not yet sure about things)

1. Once I've setup my bot and used auto setup to generate the settings, will redoing auto setup on a daily basis help the bot or should I leave it alone.

2. If my bot places an order which doesn't complete in time for the bot, should I cancel it so the bot can use the coins or ignore it (since if I wait long enough the order will probably be fulfilled eventually).

Thanks!

1 - Depends heavily on the type of indicator. Something like a high/low indicator would benefit from that or just manually moving it.

2 - This is the bane of all things. Depending on your trade amount type, the exchange, and the cancel order insurance the answer is... maybe. For things like Cryptsy you are kinda just boned because order just sit there forever. On BTCe BTC/USD I never have any issues.

You run the risk of the bot trying to buy at 10, then the order sitting because you have all your coins allocated to that position and it can never do anything until you fix it. Especially if the price never comes back to 10.

Not using Cryptsy, using 'all in' or 'percentage' for your trade amount and 'cancel order insurance' helps this heavily.

I have really grown to hate Cryptsy...

[Phillis]

I found Hasabot is selling on another website, is it a scam or just an branch website?
http://bitcoinbotreview.com/

This is my site. I have been working directly with Stephan to help him increase sales and to further promote Haasbot. He can chime in on this as well, so no, it isn't a scam.

[SalemB]

Hi

Can anyone help me with the following questions? (I've only just purchased the software, so I am not yet sure about things)

1. Once I've setup my bot and used auto setup to generate the settings, will redoing auto setup on a daily basis help the bot or should I leave it alone.

2. If my bot places an order which doesn't complete in time for the bot, should I cancel it so the bot can use the coins or ignore it (since if I wait long enough the order will probably be fulfilled eventually).

Thanks!

1 - Depends heavily on the type of indicator. Something like a high/low indicator would benefit from that or just manually moving it.

2 - This is the bane of all things. Depending on your trade amount type, the exchange, and the cancel order insurance the answer is... maybe. For things like Cryptsy you are kinda just boned because order just sit there forever. On BTCe BTC/USD I never have any issues.

You run the risk of the bot trying to buy at 10, then the order sitting because you have all your coins allocated to that position and it can never do anything until you fix it. Especially if the price never comes back to 10.

Not using Cryptsy, using 'all in' or 'percentage' for your trade amount and 'cancel order insurance' helps this heavily.

I have really grown to hate Cryptsy...

Thanks Bajawah, that's a big help, your advice is very much appreciated.

I've moved some funds from Cryptsy to BTCe and I am seeing what happens.

[TurtleHospital]

Stephan
im really wondering why we, People that only have beginnerversion, cant use storsi indicator.
i think its essential. why ist not in all verions ?


 

[Bajawah]

Hi

Can anyone help me with the following questions? (I've only just purchased the software, so I am not yet sure about things)

1. Once I've setup my bot and used auto setup to generate the settings, will redoing auto setup on a daily basis help the bot or should I leave it alone.

2. If my bot places an order which doesn't complete in time for the bot, should I cancel it so the bot can use the coins or ignore it (since if I wait long enough the order will probably be fulfilled eventually).

Thanks!

1 - Depends heavily on the type of indicator. Something like a high/low indicator would benefit from that or just manually moving it.

2 - This is the bane of all things. Depending on your trade amount type, the exchange, and the cancel order insurance the answer is... maybe. For things like Cryptsy you are kinda just boned because order just sit there forever. On BTCe BTC/USD I never have any issues.

You run the risk of the bot trying to buy at 10, then the order sitting because you have all your coins allocated to that position and it can never do anything until you fix it. Especially if the price never comes back to 10.

Not using Cryptsy, using 'all in' or 'percentage' for your trade amount and 'cancel order insurance' helps this heavily.

I have really grown to hate Cryptsy...

Thanks Bajawah, that's a big help, your advice is very much appreciated.

I've moved some funds from Cryptsy to BTCe and I am seeing what happens.

It really comes down to API quality, and volume. It is possible to get dead trades on BTCe, but the volume is so much higher than Crapsy that the chance is a lot lower. I have not compared the API.

Stephan
im really wondering why we, People that only have beginnerversion, cant use storsi indicator.
i think its essential. why ist not in all verions ?

Personally when I had the beginner license I would have rather had a dynamic stop-loss. So it's a "to each is own" situation.

Guess you have to draw the line somewhere? lol

[Stephan224]

I found Hasabot is selling on another website, is it a scam or just an branch website?
http://bitcoinbotreview.com/

This is my site. I have been working directly with Stephan to help him increase sales and to further promote Haasbot. He can chime in on this as well, so no, it isn't a scam.

Yes i can confirm this. We are having our first try of reselling licenses using a partner. Its the first and only one, we do not have plans to expand this reselling principle yet.

Has anyone had any luck with the [EarningsOnPercentageTrade Indicator]?

The indicator almost seems like a combination of [BlindSignal Indicator] and [PercentageChange Insurance], yea?

The [EarningsOnPercentageTrade Indicator] can indeed best be compared to the [BlindSignal Indicator] and [PercentageChange Insurance]. Is just a different setup and doing the same. (an attempt to make it easier)

Be ware, we are currently in a downtrend so this means it is likely the prices will not be reached unless you compensate for it. What i mean here is that you need to make sure the percentage used for the drop is higher then the raise. Or else you might get stucked for a few days, or at least this weekend. In a uptrend you can do the same adjustment, but the other way around. Again to compensate for the general price trend and to keep the trading up.

Stephan
im really wondering why we, People that only have beginnerversion, cant use storsi indicator.
i think its essential. why ist not in all verions ?

The beginner version is really made to help out beginners. That is why the trade indicator and safety toolset is limited.

It is not essential either, because the reasoning is wrong. I think i know why you ask for this indicator in specific, its because by default this trade indicator is giving off the best trade moments. But i can tell you this is just an illusion. The real reason why this trade indicator (by default) gives off the best trade moments is because of the time that it is using.

By default almost each indicator uses a period of 30 minutes to have a view on the prices. The StochRSI is an exception is this. the StochRSI combines both the RSI with the Stoch and so is needs 2x the view. Or in other words, it runs on 60minutes instead of the 30minutes. And this is the only reason why it preforms so well at default. It uses 60minutes and if you adjust an RSI or Stoch to do the same then you will almost get the same (or better) trade momentums. It comes all down to time you give an indicator to say its now high in price or low.

--------------------

@All
And as last i have a glimp of the internal arbitrage that we are working on. We are receiving a lot of information request about how it would work and these screenshots will give a very good impression (at least i hope)

This is a screenshot of which pairs are compatible and can be used in combination.


This is a screenshot of how the calculation is done. (the filter here is Btc/Usd, thats wrong because we will work with a coin and not with pairs on this)


Please note that i have only made these screenshots to show the principle, how it will work. This is not how it will look like when we introduce it, that will be much better of course.

BTW It may not look this way directly, but trading volume is taken into account on the internal arbitrage. We are aware this could be a possible problem with this so we have taken care of that with predefined (aka allowed) lists.

And as last... before the big update (v1.0) comes we will first release another smaller one somewhere next week. This smaller update will bring support for trading at Kraken and at the same time we have a look to add DEMA to the indicators list to. (it was requested by a few users)

[Bajawah]

This looks awesome!

Will we be able to one click submit arbitrage limit orders?