Bitcoin Forum
January 26, 2022, 05:10:38 PM *
News: Latest Bitcoin Core release: 22.0 [Torrent]
 
   Home   Help Search Login Register More  
Pages: « 1 2 3 4 5 6 [7] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 ... 108 »
  Print  
Author Topic: Official FutureBit Moonlander 2 Driver and Support Thread  (Read 69703 times)
jstefanop
Legendary
*
Offline Offline

Activity: 1966
Merit: 1316


View Profile
December 02, 2017, 05:20:10 PM
 #121

Hey there jstefanop, just received my order a couple of days ago, and it seems like one of my miners has an issue where it runs normally for a brief period of time (avg 2-min hashrate of ~4.1 running at 756), and after a few minutes, it ramps down to ~2.7 or so, and that's where it stays. I have two other units that work fine, and do not exhibit this behavior. I've tried adjusting the core voltage a bit (swept the from 0.7 - 0.825), but nothing seemed to have an effect. Didn't alter mem voltage. Another note is that I don't notice this drop when I run at lower frequencies; at 684 for example, all three sticks seems to have a avg 2-min hashrate of 1.75.

Not sure if it helps, but its unit #2815. Any thoughts or suggestions? Got a multimeter in case that's useful. Thanks in advance!

I wouldnt be worried unless your average hashrate, and pool hashrate (the last two numbers) show lower than expected hash. Also try isolating that miner to see if its a hub/power issue.

Project Apollo: A Pod Miner Designed for the Home https://bitcointalk.org/index.php?topic=4974036
FutureBit Moonlander 2 USB Scrypt Stick Miner: https://bitcointalk.org/index.php?topic=2125643.0
LTC:LX5vpxrQE4eLRLPobKwZhw2comkKFCh3p4 - BTC:14w9Lea6kdVzspJk8TQRe7qSYu9LhzJJsh
"In a nutshell, the network works like a distributed timestamp server, stamping the first transaction to spend a coin. It takes advantage of the nature of information being easy to spread but hard to stifle." -- Satoshi
Advertised sites are not endorsed by the Bitcoin Forum. They may be unsafe, untrustworthy, or illegal in your jurisdiction. Advertise here.
1643217038
Hero Member
*
Offline Offline

Posts: 1643217038

View Profile Personal Message (Offline)

Ignore
1643217038
Reply with quote  #2

1643217038
Report to moderator
1643217038
Hero Member
*
Offline Offline

Posts: 1643217038

View Profile Personal Message (Offline)

Ignore
1643217038
Reply with quote  #2

1643217038
Report to moderator
Megaquake
Hero Member
*****
Offline Offline

Activity: 629
Merit: 506


View Profile WWW
December 02, 2017, 08:35:01 PM
 #122

I will ask here also.

Why are these needing to be built by HolyScott before shipping?

HolyScott-

I was not expecting labor to have to build and put them all together

Mines at Kano.is best profit in the world!

在Kano.is的BTC
dora-gt
Newbie
*
Offline Offline

Activity: 9
Merit: 0


View Profile
December 02, 2017, 10:53:05 PM
 #123

similar to yellowshark,

my landers are ...

Code:
MLD 0:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 1:       |  3.94/ 3.59/ 3.74Mh/s | A:  53 R:0+0(none) HW: 0/none
 MLD 2:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 3:       |  3.88/ 3.85/ 3.97Mh/s | A:  59 R:0+0(none) HW: 1/.21%
 MLD 4:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 5:       |  3.88/ 3.85/ 3.98Mh/s | A:  66 R:0+0(none) HW: 0/none
 MLD 6:       |  3.87/ 4.00/ 3.92Mh/s | A:  66 R:0+0(none) HW: 1/.21%
 MLD 7:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 8:       |  3.84/ 3.82/ 4.08Mh/s | A:  60 R:0+0(none) HW: 0/none
 MLD 9:       |  3.80/ 3.84/ 3.86Mh/s | A:  64 R:0+0(none) HW: 5/1.1%
 MLD10:       |  3.81/ 3.85/ 4.29Mh/s | A:  78 R:0+0(none) HW: 0/none
 MLD11:       |  3.90/ 3.81/ 3.89Mh/s | A:  73 R:0+0(none) HW: 1/.21%
 MLD12:       |  3.81/ 3.80/ 4.10Mh/s | A:  60 R:0+0(none) HW: 0/none
 MLD13:       |  3.88/ 3.85/ 3.95Mh/s | A:  74 R:0+0(none) HW: 0/none
 MLD14:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD15:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD16:       | 565.5/544.4/564.6kh/s | A:   9 R:0+0(none) HW: 0/none
 MLD17:       |  58.0/ 45.7/ 33.2kh/s | A:   0 R:0+0(none) HW: 0/none
 MLD18:       |  3.86/ 3.85/ 4.11Mh/s | A:  67 R:0+0(none) HW: 0/none
 MLD19:       |  60.3/ 51.1/ 74.7kh/s | A:   5 R:0+0(none) HW: 0/none
 MLD20:       |  2.52/ 2.87/ 3.02Mh/s | A:  44 R:0+0(none) HW: 1/.27%
 MLD21:       |  3.90/ 3.93/ 4.24Mh/s | A:  74 R:0+0(none) HW: 1/.20%
 MLD22:       |  3.89/ 3.82/ 4.07Mh/s | A:  72 R:0+0(none) HW: 0/none
 MLD23:       |  2.57/ 2.93/ 3.26Mh/s | A:  44 R:0+0(none) HW: 0/none
 MLD24:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD25:       |  2.38/ 2.75/ 2.89Mh/s | A:  50 R:0+0(none) HW: 0/none
 MLD26:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD27:       |  2.43/ 3.00/ 3.16Mh/s | A:  47 R:0+0(none) HW: 0/none
 MLD28:       |  3.89/ 3.84/ 3.90Mh/s | A:  54 R:0+0(none) HW: 1/.21%
 MLD29:       |  2.56/ 2.93/ 2.87Mh/s | A:  42 R:0+0(none) HW: 0/none
 MLD30:       | 330.2/315.8/240.8kh/s | A:   7 R:0+0(none) HW: 0/none
 MLD31:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD32:       |  3.90/ 3.85/ 3.84Mh/s | A:  60 R:0+0(none) HW: 0/none
 MLD33:       |  3.92/ 4.01/ 4.18Mh/s | A:  55 R:0+0(none) HW: 1/.20%
 MLD34:       |  3.87/ 3.84/ 3.85Mh/s | A:  53 R:0+0(none) HW: 0/none
 MLD35:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD36:       |  3.85/ 3.84/ 3.89Mh/s | A:  74 R:0+0(none) HW: 0/none
 MLD37:       |  3.83/ 3.86/ 4.12Mh/s | A:  71 R:0+0(none) HW: 0/none
 MLD38:       |  3.90/ 3.85/ 4.40Mh/s | A:  59 R:0+0(none) HW: 4/.75%
 MLD39:       |  3.93/ 3.86/ 4.43Mh/s | A:  68 R:0+0(none) HW: 0/none
 MLD40:       |  3.84/ 3.79/ 3.69Mh/s | A:  59 R:0+0(none) HW: 2/.45%
 MLD41:       |  3.02/ 3.59/ 4.00Mh/s | A:  47 R:0+0(none) HW: 0/none
 MLD42:       |  1.92/ 1.31/ 1.16Mh/s | A:  24 R:0+0(none) HW: 0/none
 MLD43:       |  3.90/ 3.81/ 4.03Mh/s | A:  75 R:0+0(none) HW: 1/.21%
 MLD44:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD45:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD46:       |  3.86/ 3.80/ 3.74Mh/s | A:  59 R:0+0(none) HW: 0/none
 MLD47:       | 521.5/380.5/307.2kh/s | A:   6 R:0+0(none) HW: 0/none
 MLD48:       |  3.93/ 3.87/ 4.03Mh/s | A:  63 R:0+0(none) HW: 1/.21%
 MLD49:       |  3.84/ 3.79/ 4.12Mh/s | A:  64 R:0+0(none) HW: 4/.80%
 MLD50:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD51:       |  1.41/ 1.24/ 1.20Mh/s | A:  15 R:0+0(none) HW: 0/none
 MLD52:       |  2.61/ 2.75/ 2.87Mh/s | A:  46 R:0+0(none) HW: 0/none
 MLD53:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD54:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD55:       |  3.92/ 3.88/ 4.13Mh/s | A:  81 R:0+0(none) HW: 1/.20%
 MLD56:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD57:       |  2.97/ 3.57/ 3.75Mh/s | A:  51 R:0+0(none) HW: 0/none
 MLD58:       | 279.0/253.1/274.0kh/s | A:   8 R:0+0(none) HW: 0/none
 MLD59:       |  3.88/ 3.83/ 3.84Mh/s | A:  57 R:0+0(none) HW: 0/none
 MLD60:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD61:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD62:       |  2.54/ 2.39/ 2.51Mh/s | A:  39 R:0+0(none) HW: 0/none
 MLD63:       |  3.90/ 3.85/ 4.09Mh/s | A:  56 R:0+0(none) HW: 0/none
 MLD64:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD65:       |  3.84/ 3.80/ 4.29Mh/s | A:  62 R:0+0(none) HW: 2/.39%
 MLD66:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD67:       |  3.87/ 4.01/ 3.99Mh/s | A:  40 R:0+0(none) HW: 1/.21%
 MLD68:       | 180.0/148.8/149.5kh/s | A:   8 R:0+0(none) HW: 0/none
 MLD69:       | 739.5/656.6/722.3kh/s | A:  16 R:0+0(none) HW: 2/2.2%
 MLD70:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD71:       |  3.89/ 3.85/ 3.68Mh/s | A:  57 R:0+0(none) HW: 0/none
 MLD72:       |  3.87/ 3.82/ 3.92Mh/s | A:  66 R:0+0(none) HW: 0/none
 MLD73:       |  3.90/ 3.85/ 3.84Mh/s | A:  56 R:0+0(none) HW: 2/.43%
 MLD74:       |  1.26/ 0.98/ 0.99Mh/s | A:  12 R:0+0(none) HW: 0/none

there are 2 types of problem.

1) not working at all (it may be USB trouble but my power supply is very strong)
2) dropping down to kH/s

idk why... I really want auto restart function.
So I'm running 75 landers now, it outputs only 160MH/s... I'm sad...
aarons6
Legendary
*
Offline Offline

Activity: 1736
Merit: 1006


View Profile
December 02, 2017, 10:53:43 PM
 #124

I will ask here also.

Why are these needing to be built by HolyScott before shipping?

HolyScott-

I was not expecting labor to have to build and put them all together

he is putting them together so he can test them first.. i asked.

i guess he didnt feel comfortable just sending them out untested.
aarons6
Legendary
*
Offline Offline

Activity: 1736
Merit: 1006


View Profile
December 02, 2017, 10:55:12 PM
 #125

similar to yellowshark,

my landers are ...

Code:
MLD 0:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 1:       |  3.94/ 3.59/ 3.74Mh/s | A:  53 R:0+0(none) HW: 0/none
 MLD 2:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 3:       |  3.88/ 3.85/ 3.97Mh/s | A:  59 R:0+0(none) HW: 1/.21%
 MLD 4:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 5:       |  3.88/ 3.85/ 3.98Mh/s | A:  66 R:0+0(none) HW: 0/none
 MLD 6:       |  3.87/ 4.00/ 3.92Mh/s | A:  66 R:0+0(none) HW: 1/.21%
 MLD 7:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD 8:       |  3.84/ 3.82/ 4.08Mh/s | A:  60 R:0+0(none) HW: 0/none
 MLD 9:       |  3.80/ 3.84/ 3.86Mh/s | A:  64 R:0+0(none) HW: 5/1.1%
 MLD10:       |  3.81/ 3.85/ 4.29Mh/s | A:  78 R:0+0(none) HW: 0/none
 MLD11:       |  3.90/ 3.81/ 3.89Mh/s | A:  73 R:0+0(none) HW: 1/.21%
 MLD12:       |  3.81/ 3.80/ 4.10Mh/s | A:  60 R:0+0(none) HW: 0/none
 MLD13:       |  3.88/ 3.85/ 3.95Mh/s | A:  74 R:0+0(none) HW: 0/none
 MLD14:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD15:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD16:       | 565.5/544.4/564.6kh/s | A:   9 R:0+0(none) HW: 0/none
 MLD17:       |  58.0/ 45.7/ 33.2kh/s | A:   0 R:0+0(none) HW: 0/none
 MLD18:       |  3.86/ 3.85/ 4.11Mh/s | A:  67 R:0+0(none) HW: 0/none
 MLD19:       |  60.3/ 51.1/ 74.7kh/s | A:   5 R:0+0(none) HW: 0/none
 MLD20:       |  2.52/ 2.87/ 3.02Mh/s | A:  44 R:0+0(none) HW: 1/.27%
 MLD21:       |  3.90/ 3.93/ 4.24Mh/s | A:  74 R:0+0(none) HW: 1/.20%
 MLD22:       |  3.89/ 3.82/ 4.07Mh/s | A:  72 R:0+0(none) HW: 0/none
 MLD23:       |  2.57/ 2.93/ 3.26Mh/s | A:  44 R:0+0(none) HW: 0/none
 MLD24:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD25:       |  2.38/ 2.75/ 2.89Mh/s | A:  50 R:0+0(none) HW: 0/none
 MLD26:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD27:       |  2.43/ 3.00/ 3.16Mh/s | A:  47 R:0+0(none) HW: 0/none
 MLD28:       |  3.89/ 3.84/ 3.90Mh/s | A:  54 R:0+0(none) HW: 1/.21%
 MLD29:       |  2.56/ 2.93/ 2.87Mh/s | A:  42 R:0+0(none) HW: 0/none
 MLD30:       | 330.2/315.8/240.8kh/s | A:   7 R:0+0(none) HW: 0/none
 MLD31:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD32:       |  3.90/ 3.85/ 3.84Mh/s | A:  60 R:0+0(none) HW: 0/none
 MLD33:       |  3.92/ 4.01/ 4.18Mh/s | A:  55 R:0+0(none) HW: 1/.20%
 MLD34:       |  3.87/ 3.84/ 3.85Mh/s | A:  53 R:0+0(none) HW: 0/none
 MLD35:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD36:       |  3.85/ 3.84/ 3.89Mh/s | A:  74 R:0+0(none) HW: 0/none
 MLD37:       |  3.83/ 3.86/ 4.12Mh/s | A:  71 R:0+0(none) HW: 0/none
 MLD38:       |  3.90/ 3.85/ 4.40Mh/s | A:  59 R:0+0(none) HW: 4/.75%
 MLD39:       |  3.93/ 3.86/ 4.43Mh/s | A:  68 R:0+0(none) HW: 0/none
 MLD40:       |  3.84/ 3.79/ 3.69Mh/s | A:  59 R:0+0(none) HW: 2/.45%
 MLD41:       |  3.02/ 3.59/ 4.00Mh/s | A:  47 R:0+0(none) HW: 0/none
 MLD42:       |  1.92/ 1.31/ 1.16Mh/s | A:  24 R:0+0(none) HW: 0/none
 MLD43:       |  3.90/ 3.81/ 4.03Mh/s | A:  75 R:0+0(none) HW: 1/.21%
 MLD44:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD45:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD46:       |  3.86/ 3.80/ 3.74Mh/s | A:  59 R:0+0(none) HW: 0/none
 MLD47:       | 521.5/380.5/307.2kh/s | A:   6 R:0+0(none) HW: 0/none
 MLD48:       |  3.93/ 3.87/ 4.03Mh/s | A:  63 R:0+0(none) HW: 1/.21%
 MLD49:       |  3.84/ 3.79/ 4.12Mh/s | A:  64 R:0+0(none) HW: 4/.80%
 MLD50:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD51:       |  1.41/ 1.24/ 1.20Mh/s | A:  15 R:0+0(none) HW: 0/none
 MLD52:       |  2.61/ 2.75/ 2.87Mh/s | A:  46 R:0+0(none) HW: 0/none
 MLD53:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD54:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD55:       |  3.92/ 3.88/ 4.13Mh/s | A:  81 R:0+0(none) HW: 1/.20%
 MLD56:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD57:       |  2.97/ 3.57/ 3.75Mh/s | A:  51 R:0+0(none) HW: 0/none
 MLD58:       | 279.0/253.1/274.0kh/s | A:   8 R:0+0(none) HW: 0/none
 MLD59:       |  3.88/ 3.83/ 3.84Mh/s | A:  57 R:0+0(none) HW: 0/none
 MLD60:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD61:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD62:       |  2.54/ 2.39/ 2.51Mh/s | A:  39 R:0+0(none) HW: 0/none
 MLD63:       |  3.90/ 3.85/ 4.09Mh/s | A:  56 R:0+0(none) HW: 0/none
 MLD64:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD65:       |  3.84/ 3.80/ 4.29Mh/s | A:  62 R:0+0(none) HW: 2/.39%
 MLD66:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD67:       |  3.87/ 4.01/ 3.99Mh/s | A:  40 R:0+0(none) HW: 1/.21%
 MLD68:       | 180.0/148.8/149.5kh/s | A:   8 R:0+0(none) HW: 0/none
 MLD69:       | 739.5/656.6/722.3kh/s | A:  16 R:0+0(none) HW: 2/2.2%
 MLD70:       |   0.0/  0.0/  0.0 h/s | A:   0 R:0+0(none) HW: 0/none
 MLD71:       |  3.89/ 3.85/ 3.68Mh/s | A:  57 R:0+0(none) HW: 0/none
 MLD72:       |  3.87/ 3.82/ 3.92Mh/s | A:  66 R:0+0(none) HW: 0/none
 MLD73:       |  3.90/ 3.85/ 3.84Mh/s | A:  56 R:0+0(none) HW: 2/.43%
 MLD74:       |  1.26/ 0.98/ 0.99Mh/s | A:  12 R:0+0(none) HW: 0/none

there are 2 types of problem.

1) not working at all (it may be USB trouble but my power supply is very strong)
2) dropping down to kH/s

idk why... I really want auto restart function.
So I'm running 75 landers now, it outputs only 160MH/s... I'm sad...


your problem is usb speed.. try upping the worker difficulty.. i found if you have it too low, say 64 or 128 and multiple sticks... they get jammed up after awhile.
also minera has a restart option. it works great.

yellowshark
Newbie
*
Offline Offline

Activity: 2
Merit: 0


View Profile
December 02, 2017, 11:20:53 PM
Last edit: December 03, 2017, 03:52:15 PM by yellowshark
 #126

Hey there jstefanop, just received my order a couple of days ago, and it seems like one of my miners has an issue where it runs normally for a brief period of time (avg 2-min hashrate of ~4.1 running at 756), and after a few minutes, it ramps down to ~2.7 or so, and that's where it stays. I have two other units that work fine, and do not exhibit this behavior. I've tried adjusting the core voltage a bit (swept the from 0.7 - 0.825), but nothing seemed to have an effect. Didn't alter mem voltage. Another note is that I don't notice this drop when I run at lower frequencies; at 684 for example, all three sticks seems to have a avg 2-min hashrate of 1.75.

Not sure if it helps, but its unit #2815. Any thoughts or suggestions? Got a multimeter in case that's useful. Thanks in advance!

I wouldnt be worried unless your average hashrate, and pool hashrate (the last two numbers) show lower than expected hash. Also try isolating that miner to see if its a hub/power issue.

Thanks for the reply. Definitely have excluded the USB ports: my two other miners seem to operate fine on the same port(s); both are very stable for long runs, one at 832mhz and the other at 796mhz. And sorry I didn't mention it originally, but yes: the average hashrate and the pool hashrate both trend downwards, once this "throttling" kicks in. Currently I'm running it at 700mhz / .75v core / 0.9v mem; for the first ten minutes, it hashed at about 3.8Mh/s, but then it throttled around that time, and the values have now settled at 2.63 / 2.68 / 2.76Mh/s after running for about 25 minutes total. That's what happens pretty much every time I run them: two run great, but this one throttles down to 2.7Mh/s, and I can't seem to get it to hash above that rate unless I restart BFGMiner.

On a side note, it sounds very similar to what soifigured described in this post:

Got some assembled and up and running.  I'm noticing some are slowing down to about 2MH after running for an hour or so.  Is this a self preservation feature?  Are they running too hot?  I hit all the small heatsinks with my pyrometer and temps are all about 60C.

Thanks again for all the help, appreciate you taking the time to help us out.

*Edit: I might have found a sweet spot for the voltages on this miner, I dropped the memory down quite a bit and currently I'm having a nice run with it at 756mhz, using core voltage of 0.73v and memory voltage of 0.79v. The values currently being reported by bfgminer are 4.25 / 4.22 / 4.29Mh/s, and it's been running for ~15 mins or so. I kept mulling over the fact that the miner was just being throttled, but still was basically healthy, for all intents and purposes. So I decided to try reducing the stock voltages a bit and see how things go. Will let you guys know if this works out for me, gonna give let it run overnight.

** Final edit: results of the overnight run are good. All three miners are working great now.
RdStrcklnd
Jr. Member
*
Offline Offline

Activity: 70
Merit: 1


View Profile
December 02, 2017, 11:49:40 PM
 #127


[/quote]

your problem is usb speed.. try upping the worker difficulty.. i found if you have it too low, say 64 or 128 and multiple sticks... they get jammed up after awhile.
also minera has a restart option. it works great.


[/quote]

How do you get them to run on Minera? I know how to get Minera on a Pi, but is it just plug and play from there?
Megaquake
Hero Member
*****
Offline Offline

Activity: 629
Merit: 506


View Profile WWW
December 03, 2017, 12:22:34 AM
 #128

These no longer will work on NH

| 19.48/19.40/ 8.94Mh/s | A:1 R:0+0(none)  0 days 00:08:16], one share 8 minutes lol

 [2017-12-02 19:16:59] Stratum from pool 2 detected new block
 [2017-12-02 19:17:05] Stratum from pool 2 detected new block
 [2017-12-02 19:17:32] Network difficulty changed to 984k ( 7.04Th)
 [2017-12-02 19:17:32] Stratum from pool 2 detected new block
 [2017-12-02 19:19:01] Stratum from pool 2 detected new block
 [2017-12-02 19:19:31] Network difficulty changed to 993k ( 7.11Th)
 [2017-12-02 19:19:31] Stratum from pool 2 detected new block
 [2017-12-02 19:19:44] Network difficulty changed to 1.19M ( 8.51Th)
 [2017-12-02 19:19:44] Stratum from pool 2 detected new block
 [2017-12-02 19:20:07] Network difficulty changed to 1.48M (10.62Th)
 [2017-12-02 19:20:07] Stratum from pool 2 detected new block
 [2017-12-02 19:20:57] Stratum from pool 2 detected new block
 [2017-12-02 19:21:52] Network difficulty changed to 1.62M (11.61Th)
 [2017-12-02 19:21:52] Stratum from pool 2 detected new block
 [2017-12-02 19:22:00] Network difficulty changed to 1.84M (13.19Th)
 [2017-12-02 19:22:00] Stratum from pool 2 detected new block
 [2017-12-02 19:22:13] Stratum from pool 2 detected new block
 [2017-12-02 19:23:37] Network difficulty changed to 2.01M (14.42Th)
 [2017-12-02 19:23:37] Stratum from pool 2 detected new block

Mines at Kano.is best profit in the world!

在Kano.is的BTC
aarons6
Legendary
*
Offline Offline

Activity: 1736
Merit: 1006


View Profile
December 03, 2017, 12:25:32 AM
Last edit: December 04, 2017, 06:59:42 PM by aarons6
 #129

These no longer will work on NH

| 19.48/19.40/ 8.94Mh/s | A:1 R:0+0(none)  0 days 00:08:16], one share 8 minutes lol

 [2017-12-02 19:16:59] Stratum from pool 2 detected new block
 [2017-12-02 19:17:05] Stratum from pool 2 detected new block
 [2017-12-02 19:17:32] Network difficulty changed to 984k ( 7.04Th)
 [2017-12-02 19:17:32] Stratum from pool 2 detected new block
 [2017-12-02 19:19:01] Stratum from pool 2 detected new block
 [2017-12-02 19:19:31] Network difficulty changed to 993k ( 7.11Th)
 [2017-12-02 19:19:31] Stratum from pool 2 detected new block
 [2017-12-02 19:19:44] Network difficulty changed to 1.19M ( 8.51Th)
 [2017-12-02 19:19:44] Stratum from pool 2 detected new block
 [2017-12-02 19:20:07] Network difficulty changed to 1.48M (10.62Th)
 [2017-12-02 19:20:07] Stratum from pool 2 detected new block
 [2017-12-02 19:20:57] Stratum from pool 2 detected new block
 [2017-12-02 19:21:52] Network difficulty changed to 1.62M (11.61Th)
 [2017-12-02 19:21:52] Stratum from pool 2 detected new block
 [2017-12-02 19:22:00] Network difficulty changed to 1.84M (13.19Th)
 [2017-12-02 19:22:00] Stratum from pool 2 detected new block
 [2017-12-02 19:22:13] Stratum from pool 2 detected new block
 [2017-12-02 19:23:37] Network difficulty changed to 2.01M (14.42Th)
 [2017-12-02 19:23:37] Stratum from pool 2 detected new block

i havent tested mine on nh, but they dont work on zpool or multipool.us sorry i meant prohashing :/

try putting #skipcbcheck on the url after the port number.
Megaquake
Hero Member
*****
Offline Offline

Activity: 629
Merit: 506


View Profile WWW
December 03, 2017, 12:28:38 AM
 #130

These no longer will work on NH

| 19.48/19.40/ 8.94Mh/s | A:1 R:0+0(none)  0 days 00:08:16], one share 8 minutes lol

 [2017-12-02 19:16:59] Stratum from pool 2 detected new block
 [2017-12-02 19:17:05] Stratum from pool 2 detected new block
 [2017-12-02 19:17:32] Network difficulty changed to 984k ( 7.04Th)
 [2017-12-02 19:17:32] Stratum from pool 2 detected new block
 [2017-12-02 19:19:01] Stratum from pool 2 detected new block
 [2017-12-02 19:19:31] Network difficulty changed to 993k ( 7.11Th)
 [2017-12-02 19:19:31] Stratum from pool 2 detected new block
 [2017-12-02 19:19:44] Network difficulty changed to 1.19M ( 8.51Th)
 [2017-12-02 19:19:44] Stratum from pool 2 detected new block
 [2017-12-02 19:20:07] Network difficulty changed to 1.48M (10.62Th)
 [2017-12-02 19:20:07] Stratum from pool 2 detected new block
 [2017-12-02 19:20:57] Stratum from pool 2 detected new block
 [2017-12-02 19:21:52] Network difficulty changed to 1.62M (11.61Th)
 [2017-12-02 19:21:52] Stratum from pool 2 detected new block
 [2017-12-02 19:22:00] Network difficulty changed to 1.84M (13.19Th)
 [2017-12-02 19:22:00] Stratum from pool 2 detected new block
 [2017-12-02 19:22:13] Stratum from pool 2 detected new block
 [2017-12-02 19:23:37] Network difficulty changed to 2.01M (14.42Th)
 [2017-12-02 19:23:37] Stratum from pool 2 detected new block

i havent tested mine on nh, but they dont work on zpool or multipool.us :/

try putting #skipcbcheck on the url after the port number.


Yea that is a known issue having to use /#skipcbcheck using scrypt algo with bfgminer, that will not help with the difficulty, I even tried to set a minimum diff in the password field, did not help

Mines at Kano.is best profit in the world!

在Kano.is的BTC
Megaquake
Hero Member
*****
Offline Offline

Activity: 629
Merit: 506


View Profile WWW
December 03, 2017, 12:31:38 AM
 #131

Need a list of scrypt pools these are not compatible with, you cannot mine on pro hashing either

Mines at Kano.is best profit in the world!

在Kano.is的BTC
StSchil
Newbie
*
Offline Offline

Activity: 1
Merit: 0


View Profile
December 03, 2017, 12:41:47 AM
 #132

Hello,
 I will preface the following statement by saying that I am a 100% newbie to mining and know just about enough about computers to make myself dangerous, but also know that I'm a Hands On type learner and must dive in and try things.  So on to my question:

    I got my 4 Moonlander2s in the mail last week and hadn't had much of a chance to toy with them until today.   I followed the set up instructions, downloaded the drivers and other software and got them up and running in no time flat.  I ran them for about 15 mins and they were all hashing like crazy, it was then I realized that there was one very important step left out of the set up, at least for noobs like me;  Where and how does one edit the file to insert our own personal user name, password, and wallet address for the distribution of the his/her share of the block reward? 

Thanks in advance to anyone willing to point me in the right direction.

Steve
jstefanop
Legendary
*
Offline Offline

Activity: 1966
Merit: 1316


View Profile
December 03, 2017, 01:08:35 AM
 #133

These no longer will work on NH

| 19.48/19.40/ 8.94Mh/s | A:1 R:0+0(none)  0 days 00:08:16], one share 8 minutes lol

 [2017-12-02 19:16:59] Stratum from pool 2 detected new block
 [2017-12-02 19:17:05] Stratum from pool 2 detected new block
 [2017-12-02 19:17:32] Network difficulty changed to 984k ( 7.04Th)
 [2017-12-02 19:17:32] Stratum from pool 2 detected new block
 [2017-12-02 19:19:01] Stratum from pool 2 detected new block
 [2017-12-02 19:19:31] Network difficulty changed to 993k ( 7.11Th)
 [2017-12-02 19:19:31] Stratum from pool 2 detected new block
 [2017-12-02 19:19:44] Network difficulty changed to 1.19M ( 8.51Th)
 [2017-12-02 19:19:44] Stratum from pool 2 detected new block
 [2017-12-02 19:20:07] Network difficulty changed to 1.48M (10.62Th)
 [2017-12-02 19:20:07] Stratum from pool 2 detected new block
 [2017-12-02 19:20:57] Stratum from pool 2 detected new block
 [2017-12-02 19:21:52] Network difficulty changed to 1.62M (11.61Th)
 [2017-12-02 19:21:52] Stratum from pool 2 detected new block
 [2017-12-02 19:22:00] Network difficulty changed to 1.84M (13.19Th)
 [2017-12-02 19:22:00] Stratum from pool 2 detected new block
 [2017-12-02 19:22:13] Stratum from pool 2 detected new block
 [2017-12-02 19:23:37] Network difficulty changed to 2.01M (14.42Th)
 [2017-12-02 19:23:37] Stratum from pool 2 detected new block

i havent tested mine on nh, but they dont work on zpool or multipool.us :/

try putting #skipcbcheck on the url after the port number.


Yea that is a known issue having to use /#skipcbcheck using scrypt algo with bfgminer, that will not help with the difficulty, I even tried to set a minimum diff in the password field, did not help

They are running, just the pool diff is very high for these. Like I said most pools are not designed to run anything slower than 200-500 MH these days. Some pools have an option to set the diff in the password field (for example litecoinpool password "d=128" sets the diff to 128. 128 or 256 is a good value for these for shares every few seconds. Past that it will take minutes or longer for you to see a share. If pools don't have this, id contact them and ask for a "low diff port" (under 512) for USB miners.

Technically as long as the red LED is flashing constantly and hash rate displayed is good, it dosent matter that your submitted shares at a lower rate, just payout variance will be higher.

Project Apollo: A Pod Miner Designed for the Home https://bitcointalk.org/index.php?topic=4974036
FutureBit Moonlander 2 USB Scrypt Stick Miner: https://bitcointalk.org/index.php?topic=2125643.0
LTC:LX5vpxrQE4eLRLPobKwZhw2comkKFCh3p4 - BTC:14w9Lea6kdVzspJk8TQRe7qSYu9LhzJJsh
RdStrcklnd
Jr. Member
*
Offline Offline

Activity: 70
Merit: 1


View Profile
December 03, 2017, 01:53:49 AM
 #134

Hello,
 I will preface the following statement by saying that I am a 100% newbie to mining and know just about enough about computers to make myself dangerous, but also know that I'm a Hands On type learner and must dive in and try things.  So on to my question:

    I got my 4 Moonlander2s in the mail last week and hadn't had much of a chance to toy with them until today.   I followed the set up instructions, downloaded the drivers and other software and got them up and running in no time flat.  I ran them for about 15 mins and they were all hashing like crazy, it was then I realized that there was one very important step left out of the set up, at least for noobs like me;  Where and how does one edit the file to insert our own personal user name, password, and wallet address for the distribution of the his/her share of the block reward? 

Thanks in advance to anyone willing to point me in the right direction.

Steve

Check out Astrali's instructions on the first page, you want the part where you use nano.
RdStrcklnd
Jr. Member
*
Offline Offline

Activity: 70
Merit: 1


View Profile
December 03, 2017, 02:34:32 AM
 #135

Can anyone help with using Minera with a Moonlander2 USB stick and a Pi 3b? I know how to get Minera on the Pi and access it via it's IP on my computer, but is it just plug and play or are there additional steps after that?
hurlgr
Newbie
*
Offline Offline

Activity: 5
Merit: 0


View Profile
December 03, 2017, 03:26:58 AM
 #136

Pre-ordered the Moonlander 2 a couple months ago and it arrived today. Thanks for this thread. Have it up and mining, all tuned in thanks to this!
jstefanop
Legendary
*
Offline Offline

Activity: 1966
Merit: 1316


View Profile
December 03, 2017, 08:04:55 AM
 #137

Can anyone help with using Minera with a Moonlander2 USB stick and a Pi 3b? I know how to get Minera on the Pi and access it via it's IP on my computer, but is it just plug and play or are there additional steps after that?

At the very least you would need to replace the bfgminer binaries it generates with my supplied RPi binaries (just copy over bfgminer executable).

After I get the next version out that fixes some bugs ill probably be able to merge it into main branch.

Project Apollo: A Pod Miner Designed for the Home https://bitcointalk.org/index.php?topic=4974036
FutureBit Moonlander 2 USB Scrypt Stick Miner: https://bitcointalk.org/index.php?topic=2125643.0
LTC:LX5vpxrQE4eLRLPobKwZhw2comkKFCh3p4 - BTC:14w9Lea6kdVzspJk8TQRe7qSYu9LhzJJsh
aarons6
Legendary
*
Offline Offline

Activity: 1736
Merit: 1006


View Profile
December 03, 2017, 08:11:52 AM
 #138

Can anyone help with using Minera with a Moonlander2 USB stick and a Pi 3b? I know how to get Minera on the Pi and access it via it's IP on my computer, but is it just plug and play or are there additional steps after that?

At the very least you would need to replace the bfgminer binaries it generates with my supplied RPi binaries (just copy over bfgminer executable).

After I get the next version out that fixes some bugs ill probably be able to merge it into main branch.

just copy the bfgminer to the minera custom folder.. it needs to be renamed to bfgminer-futurebit2
Astrali
Full Member
***
Offline Offline

Activity: 281
Merit: 130

Crypto Addicted


View Profile WWW
December 03, 2017, 12:27:58 PM
 #139

Hello,
 I will preface the following statement by saying that I am a 100% newbie to mining and know just about enough about computers to make myself dangerous, but also know that I'm a Hands On type learner and must dive in and try things.  So on to my question:

    I got my 4 Moonlander2s in the mail last week and hadn't had much of a chance to toy with them until today.   I followed the set up instructions, downloaded the drivers and other software and got them up and running in no time flat.  I ran them for about 15 mins and they were all hashing like crazy, it was then I realized that there was one very important step left out of the set up, at least for noobs like me;  Where and how does one edit the file to insert our own personal user name, password, and wallet address for the distribution of the his/her share of the block reward? 

Thanks in advance to anyone willing to point me in the right direction.

Steve

hi, as RdStrcklnd already mentioned - i made a step by step instruction for use on linux enviroments like raspberry pi (without having the device in my hands actually).

Do you run it on windows or linux enviroment?

You need to do the changes in the "start" file you are using - its either an .sh file on linux or a .bat file on windows.
this one needs editing. the address after -u is the username and in many cases is your receiving wallet address.
we need more info to help you Smiley

Greetings - Astrali

Join the mining! pool.cryptopowered.club    Smiley   || Need a miner? Rent one! MiningRigRentals
philipma1957
Legendary
*
Offline Offline

Activity: 3276
Merit: 4122



View Profile
December 03, 2017, 01:36:03 PM
 #140

review is up


https://bitcointalk.org/index.php?topic=2510901.msg25663311#msg25663311

I see BTC as the super highway and alt coins as taxis and trucks needed to move transactions.
Pages: « 1 2 3 4 5 6 [7] 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 ... 108 »
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.19 | SMF © 2006-2009, Simple Machines Valid XHTML 1.0! Valid CSS!