thegun69
Newbie
Offline
Activity: 12
Merit: 0
|
|
November 28, 2013, 07:15:22 AM |
|
Anyone else find it a bit ironic that as Australians we chose this group buy because its local, therefore we'd be getting the boards first out of everyone but looks like we'll be the last? Maybe ironic isn't the right word, but I had to chuckle to myself.
Not having a dig only sharing a thought I've had.
We are based in Sydney Australia, but accept orders worldwide. If you are located in Australia, this is a fantastic opportunity to get your hands on locally built quality miners, saving on shipping costs and helping build the Australian Bitcoin network. Assembly and production will be done either here in Sydney or San Francisco or both. Yes Yes, but we also trusted them to do what is best for development and production, I think they have done a fine job. I also chose them as they are within traveling distance, so i could come in the middle of the night if they run of with my money. glad that's not necessary. +1 I would've hired Y I FU's China mob guys to get my money couldn't we find sydney-based ones in the phone book? support local business and all..
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
November 28, 2013, 08:41:44 AM |
|
Anyone else find it a bit ironic that as Australians we chose this group buy because its local, therefore we'd be getting the boards first out of everyone but looks like we'll be the last? Maybe ironic isn't the right word, but I had to chuckle to myself.
Not having a dig only sharing a thought I've had.
We are based in Sydney Australia, but accept orders worldwide. If you are located in Australia, this is a fantastic opportunity to get your hands on locally built quality miners, saving on shipping costs and helping build the Australian Bitcoin network. Assembly and production will be done either here in Sydney or San Francisco or both. Yes Yes, but we also trusted them to do what is best for development and production, I think they have done a fine job. I also chose them as they are within traveling distance, so i could come in the middle of the night if they run of with my money. glad that's not necessary. +1 I would've hired Y I FU's China mob guys to get my money couldn't we find sydney-based ones in the phone book? support local business and all.. LMAO...........but they have such a good reference from Y I FU They did scare him enough to stop everything he was doing & go into hiding.........wait,we want folks we're after to stay active IRL,nevermind Just kidding!!!!!!!! Great job Barntech,hope you get a 3rd batch going....soon!!!!
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
rob143
Member
Offline
Activity: 138
Merit: 10
|
|
November 28, 2013, 09:44:42 AM |
|
I would like to see assembly in Australia. I am all for local businesses getting a boost from the btc boom.
|
|
|
|
JBT
|
|
November 28, 2013, 12:01:00 PM |
|
so i hope my 8board is on its way.....7days +- to go
|
|
|
|
Zeek_W
|
|
November 28, 2013, 01:59:23 PM |
|
I would like to see assembly in Australia. I am all for local businesses getting a boost from the btc boom.
That's what a number of us were hoping for from the get go.
|
|
|
|
eman5oh
Newbie
Offline
Activity: 57
Merit: 0
|
|
November 28, 2013, 02:02:29 PM |
|
@bobsag no need for the tracking number, I got an email from ups mychoice and my miner will arrive tomorrow! WOOT
|
|
|
|
beavertank
Member
Offline
Activity: 94
Merit: 10
.
|
|
November 28, 2013, 03:31:11 PM |
|
@bobsag no need for the tracking number, I got an email from ups mychoice and my miner will arrive tomorrow! WOOT
Me too. Sweet! It also says delivery by 11:59 pm, which may mean I spend all day specifically waiting for the boards. We shall see.
|
Did I help you out, or otherwise say something useful? A handful of satoshis are a great way to say thanks! - Address: 18JUKdmE1Satf8HJUU3pf7iu5ymQX8AzER
|
|
|
koltz
Newbie
Offline
Activity: 18
Merit: 0
|
|
November 28, 2013, 04:05:47 PM |
|
Still waiting for me ad I sent a PM.
|
|
|
|
lajz99
|
|
November 28, 2013, 06:04:00 PM |
|
For those of you using thumbs I'm getting 3.2gh/s running at ext:260:1:950 with very few hardware errors in case anyone is curious. I have some major cooling on the thumb and it was stable overnight.
Again, as suggested in the forum ramp up slowly and watch for errors. Don't damage your thumbs!
|
|
|
|
bobsag3
|
|
November 28, 2013, 06:15:00 PM |
|
Sorry for the reply times on the tracking numbers, I passed out last night . Most people should have either gotten an email with the tracking, or anyone who has PM'ed me has now been sent theirs.
|
|
|
|
vulgartrendkill
|
|
November 28, 2013, 06:21:10 PM |
|
Sorry for the reply times on the tracking numbers, I passed out last night . Most people should have either gotten an email with the tracking, or anyone who has PM'ed me has now been sent theirs. Does this include us European folk, or is Barn dealing with that side? Thx
|
|
|
|
bobsag3
|
|
November 28, 2013, 06:29:28 PM |
|
Sorry for the reply times on the tracking numbers, I passed out last night . Most people should have either gotten an email with the tracking, or anyone who has PM'ed me has now been sent theirs. Does this include us European folk, or is Barn dealing with that side? Thx I have only the US orders... and One order from Bulgaria.
|
|
|
|
daddyfatsax
|
|
November 28, 2013, 07:29:35 PM |
|
For those of you using thumbs I'm getting 3.2gh/s running at ext:260:1:950 with very few hardware errors in case anyone is curious. I have some major cooling on the thumb and it was stable overnight.
Again, as suggested in the forum ramp up slowly and watch for errors. Don't damage your thumbs!
I cannot post in the Drillbit forums yet, but I am having the same problem with my D-link hubs and Anker. Right now mine are on a Rosewill 7 port hub, they are the only 2 things plugged in and I am only getting about 2.2 gh/s per device. I have tried pushing them to 300:1:950 and they do not even get warm and hash rate stays about the same.
|
|
|
|
beavertank
Member
Offline
Activity: 94
Merit: 10
.
|
|
November 28, 2013, 07:33:32 PM |
|
For those of you using thumbs I'm getting 3.2gh/s running at ext:260:1:950 with very few hardware errors in case anyone is curious. I have some major cooling on the thumb and it was stable overnight.
Again, as suggested in the forum ramp up slowly and watch for errors. Don't damage your thumbs!
I cannot post in the Drillbit forums yet, but I am having the same problem with my D-link hubs and Anker. Right now mine are on a Rosewill 7 port hub, they are the only 2 things plugged in and I am only getting about 2.2 gh/s per device. I have tried pushing them to 300:1:950 and they do not even get warm and hash rate stays about the same. That's strange... have you double checked your command line options to make sure it's not formatted wrong somehow and being ignored?
|
Did I help you out, or otherwise say something useful? A handful of satoshis are a great way to say thanks! - Address: 18JUKdmE1Satf8HJUU3pf7iu5ymQX8AzER
|
|
|
daddyfatsax
|
|
November 28, 2013, 07:37:10 PM |
|
I copied everything straight from the DB forums. I have used separate workers for the thumbs, plugged straight into the laptop, 3 different hubs, and messed with both int and ext clocks and voltage.
|
|
|
|
lajz99
|
|
November 28, 2013, 07:40:27 PM |
|
I cannot post in the Drillbit forums yet
You can now! Sorry guys, we get a TON of member requests, most of which are spam. Trying to keep an eye out as best I can.
|
|
|
|
daddyfatsax
|
|
November 28, 2013, 07:43:36 PM |
|
Thanks! I am posting there now.
|
|
|
|
bobsag3
|
|
November 28, 2013, 08:36:10 PM |
|
|
|
|
|
DyslexicZombei
|
|
November 28, 2013, 08:38:55 PM |
|
Thanks GG bobsag3! Beautiful product barntech. Congrats! I also have a Drillbit board that's being hosted with bobsag3 at Miner Hosting LLC (in addition to about 10-15 TH on the way, joining our co-op's ~6TH already on site from 7 rounds). bobsag3 is about as perfect a vetted miner host and reseller that you'll find, if you've ever had hardware hosted with him or bought from him before at minersource.net Of course: I'm biased as his marketing/vetting agent for hosting and business partner in new ventures.
|
|
|
|
Unacceptable
Legendary
Offline
Activity: 2212
Merit: 1001
|
|
November 28, 2013, 08:58:39 PM |
|
|
"If you run into an asshole in the morning, you ran into an asshole. If you run into assholes all day long, you are the asshole." -Raylan Givens Got GOXXED ?? https://www.youtube.com/watch?v=9KiqRpPiJAU&feature=youtu.be"An ASIC being late is perfectly normal, predictable, and legal..."Hashfast & BFL slogan
|
|
|
|