[Antminer S1 Sales open] Price changes daily, now 0.414 BTC for 180GH/s

[ldh37]

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues.  The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it.  I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip.  Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

[loneknives]

order 3 wish it get here by next week Very easy to order at your site

[shaxs]

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues.  The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it.  I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip.  Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Speaking of the PSU jumper, I have some 22GA solid tinned copper wire. That should work fine for a jumper yes?

[joyyen]

Hi i am new to antminer S1 and i cannot connect my browser to 192.168.1.99 which is my antminer ip

i try to change the TCP/IPV4 to


ip address : 192.168.1.188
subnet : 255.255.255.0
default gateway : 192.168.1.1


prefered DNS : 8.8.8.8
alternative dns : blank


and also try the default antminer tutorial

IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1

Both also no luck can anyone please help me thank you

[Pcpoet]

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues.  The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it.  I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip.  Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Thank you Idh37. 

[Jacko]

Hi i am new to antminer S1 and i cannot connect my browser to 192.168.1.99 which is my antminer ip

i try to change the TCP/IPV4 to


ip address : 192.168.1.188
subnet : 255.255.255.0
default gateway : 192.168.1.1


prefered DNS : 8.8.8.8
alternative dns : blank


and also try the default antminer tutorial

IP Address: 192.168.2.254
Subnet: 255.255.255.0
Default Gateway: 192.168.2.1

Both also no luck can anyone please help me thank you

Your default gateway is your routers address. if your router is 192.168.1.1 then you don't need to change anything as the Ant is on the same and you can just type the Ants address in your browser.

[ionux]

Bah!  I love/hate the price changes!  Just paid 1.16 BTC two days ago! 

As a side note, Bitmaintech has amazingly fast processing & shipping.  Nice work, guys! +1

[pjcltd]

Hi BITMAN

I places an order today for another miner
0012014030715235017709I2pdPX0651
i paid in under the hour but its say the order has expired!!!
can you please have a look for me

Thanks
Paul

[Pcpoet]

Bah!  I love/hate the price changes!  Just paid 1.16 BTC two days ago! 

As a side note, Bitmaintech has amazingly fast processing & shipping.  Nice work, guys! +1

+2 I recieve my 2 antminer last week and it was good transaction.

[DevonMiner]

Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.

Anybody else experiencing slight delays?

[ionux]

Hi BITMAN

I places an order today for another miner
0012014030715235017709I2pdPX0651
i paid in under the hour but its say the order has expired!!!
can you please have a look for me

Thanks
Paul

Hey Paul, I don't work for these guys but you can look up the transaction on blockchain.info to see if it was confirmed or not.  Search for the address you sent the bitcoin to.

[AbiTxGroup]

Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.

Anybody else experiencing slight delays?

Be careful with posts about shipping delays, there are several here that can't wait to pounce on such posts.

I finally received a tracking number for my miners ordered on Monday and it shows that it took just shy of 84 hours from once my order was valid to actually being shipped (picked up by UPS).

Aside from the first order I placed back in Dec, this is the only time the shipping was delayed.  That is out of nine different shipments within my miners group.  It is unusual, but it happens.  It's 5:30AM Saturday there in China so more orders will be shipped later today.

[ldh37]

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues.  The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it.  I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip.  Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Speaking of the PSU jumper, I have some 22GA solid tinned copper wire. That should work fine for a jumper yes?

As long as it fits snug/makes good contact then yes.  On one of my PSUs I'm using a piece of 22AWG copper strand wire that I tinned the ends with solder and it works fine.

[Rock6.3]

Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.

Anybody else experiencing slight delays?

I ordered on Monday.
Shipped on Friday.

[n3xus]

Ordered another one and paid on Monday, but still says 'paid, valid, unshipped'. That's really unusual for Bitmain, 5 days now ... most of the others I have shipped in 2 days.

Anybody else experiencing slight delays?

I ordered on Monday.
Shipped on Friday.

I ordered 2 on Monday show paid, unshipped, valid
I'm not sure what's going on this is the first time this has happened, I contacted Bitmain via email yesterday but no response yet.
If it's not here withing the next hour it looks like Monday for me I hope. I have always received my tracking before receiving my order. This is a little odd.

[Bitkoinzz]

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

Corsair CX 600 is cheap and plenty of power and good quality

[Bitkoinzz]

What's a good power supply that is cheap and will able to overclock the Antminer S1? Any reccomendations? Thanks.

I've been running 1 Ant OC'd on a Coolmax ZU-700 PSU for a couple weeks now with no issues.  The PSU is pretty cheap just about everywhere but it does require a +5v load though to work so you will need to attach an old CDROM drive or something to it.  I actually use a cheap PSU tester which provides the +5v load and eliminates the need for a jumper wire/paperclip.  Here are links to both.

http://www.amazon.com/Coolmax-ZU-700B-CrossFire-Certified-Modular/dp/B008LA6CBC/ref=sr_1_5?s=pc&ie=UTF8&qid=1394215985&sr=1-5&keywords=power+supply

http://www.amazon.com/eForCity-24-pin-Power-Supply-Tester/dp/B005CTCD6S/ref=sr_1_1?s=electronics&ie=UTF8&qid=1394216825&sr=1-1&keywords=power+supply+tester

Speaking of the PSU jumper, I have some 22GA solid tinned copper wire. That should work fine for a jumper yes?

As long as it fits snug/makes good contact then yes.  On one of my PSUs I'm using a piece of 22AWG copper strand wire that I tinned the ends with solder and it works fine.

I use a bobby pin, cut shorter, scrape ends, fits tight

[digitizing]

you need to put some consumer on 5V cable, i have same PSU, and i put a old cdrom on 5V and never shut's down.

Are you sure?  If this is really true, that is just stupid.  Not every machine needs the 5v.  If I build a GPU mining rig running off a usb flash drive, it won't need the 5v.  6 pin to the GPU, 8 pin to the cpu, and 20/24 pin to the MB all 12v.

YES, it sure.
i'm using corsair VS550 and I should put 10 ohm 15watt resistor at the 5V output
to make it not shutdown.

[nikauforest]

Thanks Bitmain!

I ordered on Monday and received it on Friday. This was easy to setup and it arrived in mint condition. Excellent packaging etc.
No more pre orders to KNC etc... for me.

Keep up the good customer satisfaction Bitmain.
Cheers from New Zealand.

[Unacceptable]

you need to put some consumer on 5V cable, i have same PSU, and i put a old cdrom on 5V and never shut's down.

Are you sure?  If this is really true, that is just stupid.  Not every machine needs the 5v.  If I build a GPU mining rig running off a usb flash drive, it won't need the 5v.  6 pin to the GPU, 8 pin to the cpu, and 20/24 pin to the MB all 12v.

Wrong again....24pin for mobo connector has +5 volt too...several infact...up to 5 connectors  

http://www.smps.us/20-to-24pin-atx.html